On 05/09/2024 09:50, Krzysztof Kozlowski wrote: > On 05/09/2024 09:15, Jan Kiszka wrote: >> On 05.09.24 08:53, Krzysztof Kozlowski wrote: >>> On 05/09/2024 08:40, Jan Kiszka wrote: >>>> On 05.09.24 08:32, Krzysztof Kozlowski wrote: >>>>> On Wed, Sep 04, 2024 at 12:00:11PM +0200, Jan Kiszka wrote: >>>>>> From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx> >>>>>> >>>>>> The PVU on the AM65 SoC is capable of restricting DMA from PCIe devices >>>>>> to specific regions of host memory. Add the optional property >>>>>> "memory-regions" to point to such regions of memory when PVU is used. >>>>>> >>>>>> Since the PVU deals with system physical addresses, utilizing the PVU >>>>>> with PCIe devices also requires setting up the VMAP registers to map the >>>>>> Requester ID of the PCIe device to the CBA Virtual ID, which in turn is >>>>>> mapped to the system physical address. Hence, describe the VMAP >>>>>> registers which are optionally unless the PVU shall used for PCIe. >>>>>> >>>>>> Signed-off-by: Jan Kiszka <jan.kiszka@xxxxxxxxxxx> >>>>>> --- >>>>>> CC: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx> >>>>>> CC: "Krzysztof Wilczyński" <kw@xxxxxxxxx> >>>>>> CC: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> >>>>>> CC: linux-pci@xxxxxxxxxxxxxxx >>>>>> --- >>>>>> .../bindings/pci/ti,am65-pci-host.yaml | 52 ++++++++++++++----- >>>>>> 1 file changed, 40 insertions(+), 12 deletions(-) >>>>>> >>>>>> diff --git a/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml >>>>>> index 0a9d10532cc8..d8182bad92de 100644 >>>>>> --- a/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml >>>>>> +++ b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml >>>>>> @@ -19,16 +19,6 @@ properties: >>>>>> - ti,am654-pcie-rc >>>>>> - ti,keystone-pcie >>>>>> >>>>>> - reg: >>>>>> - maxItems: 4 >>>>>> - >>>>>> - reg-names: >>>>>> - items: >>>>>> - - const: app >>>>>> - - const: dbics >>>>>> - - const: config >>>>>> - - const: atu >>>>> >>>>> >>>>> Nothing improved here. >>>> >>>> Yes, explained the background to you. Sorry, if you do not address my >>>> replies, I'm lost with your feedback. >>> >>> My magic ball could not figure out the problem, so did not provide the >>> answer. >>> >>> I gave you the exact code which illustrates how to do it. If you do it >>> that way: it works. If you do it other way: it might not work. However >> >> The link you provided was unfortunately not self-explanatory because if >> I - apparently - do it like that example, I'm getting the errors below. >> >>> without seeing anything, magic ball was silent, so I am not >>> participating in game: would you be so kind to give more information so >>> I won't waste my day in asking what is wrong. >> >> With my patch: >> >> # make ... dtbs_check >> DTC [C] arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dtb >> DTC [C] arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dtb >> DTC [C] arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dtb >> DTC [C] arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dtb >> OVL [C] arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2-bkey-ekey-pcie.dtb >> OVL [C] arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2-bkey-usb3.dtb >> DTC [C] arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dtb >> DTC [C] arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-sm.dtb >> DTC [C] arch/arm64/boot/dts/ti/k3-am654-base-board.dtb >> >> With this revert on top: >> >> diff --git a/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml >> index d8182bad92de..dd753dae24c6 100644 >> --- a/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml >> +++ b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml >> @@ -19,6 +19,16 @@ properties: >> - ti,am654-pcie-rc >> - ti,keystone-pcie >> >> + reg: >> + maxItems: 4 >> + >> + reg-names: >> + items: >> + - const: app >> + - const: dbics >> + - const: config >> + - const: atu > > There is nothing like that in that example. > https://elixir.bootlin.com/linux/v6.8/source/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml#L44 > >> + >> interrupts: >> maxItems: 1 >> >> @@ -104,18 +114,6 @@ then: >> - msi-map >> - num-viewport >> >> -else: >> - properties: >> - reg: >> - maxItems: 4 >> - >> - reg-names: >> - items: >> - - const: app >> - - const: dbics >> - - const: config >> - - const: atu > > Neither this. > > Each case MUST be covered, look: > https://elixir.bootlin.com/linux/v6.8/source/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml#L191 Actually your case fits better another example from UFS, so take that one: https://elixir.bootlin.com/linux/v6.11-rc6/source/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml#L39 Best regards, Krzysztof
