[PATCH v4 04/12] dt-bindings: PCI: pci-ep: Document 'linux,pci-domain' property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>

'linux,pci-domain' property provides the PCI domain number for the PCI
endpoint controllers in a SoC. If this property is not present, then an
unstable (across boots) unique number will be assigned.

Devicetrees can specify the domain number based on the actual hardware
instance of the PCI endpoint controllers in the SoC.

Reviewed-by: Rob Herring (Arm) <robh@xxxxxxxxxx>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
 Documentation/devicetree/bindings/pci/pci-ep.yaml       | 11 +++++++++++
 Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml |  1 +
 2 files changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/pci-ep.yaml b/Documentation/devicetree/bindings/pci/pci-ep.yaml
index 0b5456ee21eb..f75000e3093d 100644
--- a/Documentation/devicetree/bindings/pci/pci-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/pci-ep.yaml
@@ -42,6 +42,17 @@ properties:
     default: 1
     maximum: 16
 
+  linux,pci-domain:
+    description:
+      If present this property assigns a fixed PCI domain number to a PCI
+      Endpoint Controller, otherwise an unstable (across boots) unique number
+      will be assigned. It is required to either not set this property at all
+      or set it for all PCI endpoint controllers in the system, otherwise
+      potentially conflicting domain numbers may be assigned to endpoint
+      controllers. The domain number for each endpoint controller in the system
+      must be unique.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
 required:
   - compatible
 
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
index 46802f7d9482..1226ee5d08d1 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
@@ -280,4 +280,5 @@ examples:
         phy-names = "pciephy";
         max-link-speed = <3>;
         num-lanes = <2>;
+        linux,pci-domain = <0>;
     };

-- 
2.25.1






[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux