Re: [PATCH v3] PCI: armada8k: change to use devm_clk_get_enabled() helper

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Wu Bo,

On Tue, 27 Aug 2024 at 07:55, Wu Bo <bo.wu@xxxxxxxx> wrote:
>
> Use devm_clk_get_enabled() instead of devm_clk_get() to make the code
> cleaner and avoid calling clk_disable_unprepare()
>
> Signed-off-by: Wu Bo <bo.wu@xxxxxxxx>
> ---
>  drivers/pci/controller/dwc/pcie-armada8k.c | 36 ++++++++--------------
>  1 file changed, 13 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-armada8k.c b/drivers/pci/controller/dwc/pcie-armada8k.c
> index b5c599ccaacf..e7ef6c2641b8 100644
> --- a/drivers/pci/controller/dwc/pcie-armada8k.c
> +++ b/drivers/pci/controller/dwc/pcie-armada8k.c
> @@ -284,23 +284,17 @@ static int armada8k_pcie_probe(struct platform_device *pdev)
>
>         pcie->pci = pci;
>
> -       pcie->clk = devm_clk_get(dev, NULL);
> +       pcie->clk = devm_clk_get_enabled(dev, NULL);
>         if (IS_ERR(pcie->clk))
> -               return PTR_ERR(pcie->clk);
> -
> -       ret = clk_prepare_enable(pcie->clk);
> -       if (ret)
> -               return ret;
> -
> -       pcie->clk_reg = devm_clk_get(dev, "reg");
> -       if (pcie->clk_reg == ERR_PTR(-EPROBE_DEFER)) {
> -               ret = -EPROBE_DEFER;
> -               goto fail;
> -       }
> -       if (!IS_ERR(pcie->clk_reg)) {
> -               ret = clk_prepare_enable(pcie->clk_reg);
> -               if (ret)
> -                       goto fail_clkreg;
> +               return dev_err_probe(dev, PTR_ERR(pcie->clk),
> +                               "could not enable clk\n");
> +
> +       pcie->clk_reg = devm_clk_get_enabled(dev, "reg");
> +       if (IS_ERR(pcie->clk_reg)) {
> +               ret = dev_err_probe(dev, PTR_ERR(pcie->clk_reg),
> +                               "could not enable reg clk\n");
> +               if (ret == -EPROBE_DEFER)
> +                       goto out;
You can drop this check as dev_err_probe handle this inside
It will defer the enabling of clock.
>         }
>
>         /* Get the dw-pcie unit configuration/control registers base. */
> @@ -308,12 +302,12 @@ static int armada8k_pcie_probe(struct platform_device *pdev)
>         pci->dbi_base = devm_pci_remap_cfg_resource(dev, base);
>         if (IS_ERR(pci->dbi_base)) {
>                 ret = PTR_ERR(pci->dbi_base);
> -               goto fail_clkreg;
> +               goto out;
>         }
>
>         ret = armada8k_pcie_setup_phys(pcie);
>         if (ret)
> -               goto fail_clkreg;
> +               goto out;
>
>         platform_set_drvdata(pdev, pcie);
>
> @@ -325,11 +319,7 @@ static int armada8k_pcie_probe(struct platform_device *pdev)
>
>  disable_phy:
>         armada8k_pcie_disable_phys(pcie);
> -fail_clkreg:
> -       clk_disable_unprepare(pcie->clk_reg);
> -fail:
> -       clk_disable_unprepare(pcie->clk);
> -
> +out:
>         return ret;
>  }
>
Thanks
-Anand
> --
> 2.25.1
>
>




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux