[PATCH V2 0/6] Enable IPQ5018 PCI support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>

This patch series adds the relevant phy and controller
DT configurations for enabling PCI gen2 support
on IPQ5018.

v2:
  Fixed all review comments from Krzysztof, Robert Marko,
  Dmitry Baryshkov, Manivannan Sadhasivam, Konrad Dybcio.
  Updated the respective patches for their changes.

v1:
 https://lore.kernel.org/lkml/32389b66-48f3-8ee8-e2f1-1613feed3cc7@xxxxxxxxx/T/

Nitheesh Sekar (5):
  dt-bindings: phy: qcom,uniphy-pcie: Document PCIe uniphy
  dt-bindings: PCI: qcom: Add IPQ5108 SoC
  phy: qcom: Introduce PCIe UNIPHY 28LP driver
  arm64: dts: qcom: ipq5018: Add PCIe related nodes
  arm64: dts: qcom: ipq5018: Enable PCIe

Sricharan R (1):
  PCI: qcom: Add support for IPQ5018

 .../devicetree/bindings/pci/qcom,pcie.yaml    |  35 ++
 .../phy/qcom,ipq5018-uniphy-pcie.yaml         |  70 ++++
 .../arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts |   9 +
 arch/arm64/boot/dts/qcom/ipq5018.dtsi         | 166 ++++++++-
 drivers/pci/controller/dwc/pcie-qcom.c        |   1 +
 drivers/phy/qualcomm/Kconfig                  |  12 +
 drivers/phy/qualcomm/Makefile                 |   1 +
 .../phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c  | 341 ++++++++++++++++++
 8 files changed, 633 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,ipq5018-uniphy-pcie.yaml
 create mode 100644 drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c

-- 
2.34.1





[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux