Re: [PATCH] PCI/PM: Put devices to low power state on shutdown

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Aug 23, 2024 at 3:28 AM Mario Limonciello
<mario.limonciello@xxxxxxx> wrote:
>
> On 7/12/2024 01:24, Kai-Heng Feng wrote:
> > Some laptops wake up after poweroff when HP Thunderbolt Dock G4 is
> > connected.
> >
> > The following error message can be found during shutdown:
> > pcieport 0000:00:1d.0: AER: Correctable error message received from 0000:09:04.0
> > pcieport 0000:09:04.0: PCIe Bus Error: severity=Correctable, type=Data Link Layer, (Receiver ID)
> > pcieport 0000:09:04.0:   device [8086:0b26] error status/mask=00000080/00002000
> > pcieport 0000:09:04.0:    [ 7] BadDLLP
> >
> > Calling aer_remove() during shutdown can quiesce the error message,
> > however the spurious wakeup still happens.
> >
> > The issue won't happen if the device is in D3 before system shutdown, so
> > putting device to low power state before shutdown to solve the issue.
> >
> > I don't have a sniffer so this is purely guesswork, however I believe
> > putting device to low power state it's the right thing to do.
>
> KH,
>
> I did testing with your patch along with a few others, and found that it
> does the best job to put a majority of devices into a low power state
> properly.
>
> I have the details of what happens at S5 outlined on this Gist:
> https://gist.github.com/superm1/f8f81e52f5b1d55b64493fdaec38e31c
>
> * KH column is this patch.
> * ML column is
> https://lore.kernel.org/linux-usb/43594a1c-c0dd-4ae1-b2c4-f5198e3fe951@xxxxxxx/T/#m03d0b36f86fb4722009b24a8ee547011128db80b
> * FS column is 0fab972eef49 being applied again
>
> I also have power testing data from an OEM's system that shows that it
> improves things well enough that a previously failing energy star
> certification is now passing.

Thanks a lot for the testing.

Bjorn, do you think this patch is in good form to get included in next -rc1?

Kai-Heng

>
> Reviewed-by: Mario Limonciello <mario.limonciello@xxxxxxx>
> Tested-by: Mario Limonciello <mario.limonciello@xxxxxxx>
>
> >
> > Link: https://bugzilla.kernel.org/show_bug.cgi?id=219036
> > Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
> > ---
> >   drivers/pci/pci-driver.c | 8 ++++++++
> >   1 file changed, 8 insertions(+)
> >
> > diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
> > index af2996d0d17f..4c6f66f3eb54 100644
> > --- a/drivers/pci/pci-driver.c
> > +++ b/drivers/pci/pci-driver.c
> > @@ -510,6 +510,14 @@ static void pci_device_shutdown(struct device *dev)
> >       if (drv && drv->shutdown)
> >               drv->shutdown(pci_dev);
> >
> > +     /*
> > +      * If driver already changed device's power state, it can mean the
> > +      * wakeup setting is in place, or a workaround is used. Hence keep it
> > +      * as is.
> > +      */
> > +     if (!kexec_in_progress && pci_dev->current_state == PCI_D0)
> > +             pci_prepare_to_sleep(pci_dev);
> > +
> >       /*
> >        * If this is a kexec reboot, turn off Bus Master bit on the
> >        * device to tell it to not continue to do DMA. Don't touch
>





[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux