Re: [PATCH 07/11] pinctrl: rp1: Implement RaspberryPi RP1 gpio support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Andrea,

thanks for your patch!

On Tue, Aug 20, 2024 at 4:36 PM Andrea della Porta
<andrea.porta@xxxxxxxx> wrote:

> The RP1 is an MFD supporting a gpio controller and /pinmux/pinctrl.
> Add minimum support for the gpio only portion. The driver is in
> pinctrl folder since upcoming patches will add the pinmux/pinctrl
> support where the gpio part can be seen as an addition.
>
> Signed-off-by: Andrea della Porta <andrea.porta@xxxxxxxx>
(...)

> +#include <linux/bitmap.h>
> +#include <linux/bitops.h>
(...)

> +static void rp1_pad_update(struct rp1_pin_info *pin, u32 clr, u32 set)
> +{
> +       u32 padctrl = readl(pin->pad);
> +
> +       padctrl &= ~clr;
> +       padctrl |= set;
> +
> +       writel(padctrl, pin->pad);
> +}

Looks a bit like a reimplementation of regmap-mmio? If you want to do
this why not use regmap-mmio?

> +static void rp1_set_dir(struct rp1_pin_info *pin, bool is_input)
> +{
> +       int offset = is_input ? RP1_CLR_OFFSET : RP1_SET_OFFSET;
> +
> +       writel(1 << pin->offset, pin->rio + RP1_RIO_OE + offset);

If you include bitops.h what about:

writel(BIT(pin->offset), pin->rio + RP1_RIO_OE + offset);

> +static int rp1_get_value(struct rp1_pin_info *pin)
> +{
> +       return !!(readl(pin->rio + RP1_RIO_IN) & (1 << pin->offset));
> +}

Also here

> +
> +static void rp1_set_value(struct rp1_pin_info *pin, int value)
> +{
> +       /* Assume the pin is already an output */
> +       writel(1 << pin->offset,
> +              pin->rio + RP1_RIO_OUT + (value ? RP1_SET_OFFSET : RP1_CLR_OFFSET));
> +}

And here

> +static int rp1_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
> +                              unsigned long config)
> +{
> +       struct rp1_pin_info *pin = rp1_get_pin(chip, offset);
> +       unsigned long configs[] = { config };
> +
> +       return rp1_pinconf_set(pin, offset, configs,
> +                              ARRAY_SIZE(configs));
> +}

Nice that you implement this!

> +static void rp1_gpio_irq_config(struct rp1_pin_info *pin, bool enable)
> +{
> +       writel(1 << pin->offset,
> +              pin->inte + (enable ? RP1_SET_OFFSET : RP1_CLR_OFFSET));

BIT()

Yours,
Linus Walleij





[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux