Hi Wu Bo,
On Thu, 22 Aug 2024 at 15:51, Wu Bo <bo.wu@xxxxxxxx> wrote:
>
> Make the code cleaner and avoid call clk_disable_unprepare()
>
> Signed-off-by: Wu Bo <bo.wu@xxxxxxxx>
> ---
> drivers/pci/controller/dwc/pcie-armada8k.c | 29 ++++++----------------
> 1 file changed, 7 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-armada8k.c b/drivers/pci/controller/dwc/pcie-armada8k.c
> index b5c599ccaacf..48009098fa6b 100644
> --- a/drivers/pci/controller/dwc/pcie-armada8k.c
> +++ b/drivers/pci/controller/dwc/pcie-armada8k.c
> @@ -284,36 +284,25 @@ static int armada8k_pcie_probe(struct platform_device *pdev)
>
> pcie->pci = pci;
>
> - pcie->clk = devm_clk_get(dev, NULL);
> + pcie->clk = devm_clk_get_enabled(dev, NULL);
> if (IS_ERR(pcie->clk))
> return PTR_ERR(pcie->clk);
I feel you can use return dev_err_probe(dev, PTR_ERR((pcie->clk);
>
> - ret = clk_prepare_enable(pcie->clk);
> - if (ret)
> - return ret;
> -
> - pcie->clk_reg = devm_clk_get(dev, "reg");
> - if (pcie->clk_reg == ERR_PTR(-EPROBE_DEFER)) {
> - ret = -EPROBE_DEFER;
> - goto fail;
> - }
> - if (!IS_ERR(pcie->clk_reg)) {
> - ret = clk_prepare_enable(pcie->clk_reg);
> - if (ret)
> - goto fail_clkreg;
> - }
> + pcie->clk_reg = devm_clk_get_enabled(dev, "reg");
> + if (pcie->clk_reg == ERR_PTR(-EPROBE_DEFER))
> + return -EPROBE_DEFER;
>
same here dev_err_probe(dev, PTR_ERR((pcie->clk_reg));
> /* Get the dw-pcie unit configuration/control registers base. */
> base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl");
> pci->dbi_base = devm_pci_remap_cfg_resource(dev, base);
> if (IS_ERR(pci->dbi_base)) {
> ret = PTR_ERR(pci->dbi_base);
> - goto fail_clkreg;
> + goto out;
> }
>
> ret = armada8k_pcie_setup_phys(pcie);
> if (ret)
> - goto fail_clkreg;
> + goto out;
>
> platform_set_drvdata(pdev, pcie);
>
> @@ -325,11 +314,7 @@ static int armada8k_pcie_probe(struct platform_device *pdev)
>
> disable_phy:
> armada8k_pcie_disable_phys(pcie);
> -fail_clkreg:
> - clk_disable_unprepare(pcie->clk_reg);
> -fail:
> - clk_disable_unprepare(pcie->clk);
> -
> +out:
> return ret;
> }
>
Thanks
-Anand
> --
> 2.25.1
>
>
