Refactor common code from RC(Root Complex) and EP(End Point)
drivers and move them to a common driver. This acts as placeholder
for common source code for both drivers, thus avoiding duplication.
Signed-off-by: Shashank Babu Chinta Venkata <quic_schintav@xxxxxxxxxxx>
---
MAINTAINERS | 3 +
drivers/pci/controller/dwc/Kconfig | 5 +
drivers/pci/controller/dwc/Makefile | 1 +
drivers/pci/controller/dwc/pcie-qcom-common.c | 88 +++++++++++
drivers/pci/controller/dwc/pcie-qcom-common.h | 15 ++
drivers/pci/controller/dwc/pcie-qcom-ep.c | 39 +----
drivers/pci/controller/dwc/pcie-qcom.c | 141 ++++++------------
7 files changed, 161 insertions(+), 131 deletions(-)
create mode 100644 drivers/pci/controller/dwc/pcie-qcom-common.c
create mode 100644 drivers/pci/controller/dwc/pcie-qcom-common.h
diff --git a/MAINTAINERS b/MAINTAINERS
index c0a62489be56..ef3e62677e9f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2785,6 +2785,7 @@ F: drivers/iommu/msm*
F: drivers/mfd/ssbi.c
F: drivers/mmc/host/mmci_qcom*
F: drivers/mmc/host/sdhci-msm.c
+F: drivers/pci/controller/dwc/pcie-qcom-common.c
F: drivers/pci/controller/dwc/pcie-qcom.c
F: drivers/phy/qualcomm/
F: drivers/power/*/msm*
@@ -17844,6 +17845,7 @@ M: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
L: linux-pci@xxxxxxxxxxxxxxx
L: linux-arm-msm@xxxxxxxxxxxxxxx
S: Maintained
+F: drivers/pci/controller/dwc/pcie-qcom-common.c
F: drivers/pci/controller/dwc/pcie-qcom.c
PCIE DRIVER FOR ROCKCHIP
@@ -17880,6 +17882,7 @@ L: linux-pci@xxxxxxxxxxxxxxx
L: linux-arm-msm@xxxxxxxxxxxxxxx
S: Maintained
F: Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
+F: drivers/pci/controller/dwc/pcie-qcom-common.c
F: drivers/pci/controller/dwc/pcie-qcom-ep.c
PCMCIA SUBSYSTEM
diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index 4c38181acffa..b6d6778b0698 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -265,12 +265,16 @@ config PCIE_DW_PLAT_EP
order to enable device-specific features PCI_DW_PLAT_EP must be
selected.
+config PCIE_QCOM_COMMON
+ bool
+
config PCIE_QCOM
bool "Qualcomm PCIe controller (host mode)"
depends on OF && (ARCH_QCOM || COMPILE_TEST)
depends on PCI_MSI
select PCIE_DW_HOST
select CRC8
+ select PCIE_QCOM_COMMON
help
Say Y here to enable PCIe controller support on Qualcomm SoCs. The
PCIe controller uses the DesignWare core plus Qualcomm-specific
@@ -281,6 +285,7 @@ config PCIE_QCOM_EP
depends on OF && (ARCH_QCOM || COMPILE_TEST)
depends on PCI_ENDPOINT
select PCIE_DW_EP
+ select PCIE_QCOM_COMMON
help
Say Y here to enable support for the PCIe controllers on Qualcomm SoCs
to work in endpoint mode. The PCIe controller uses the DesignWare core
diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
index ec215b3d6191..82e51ba11031 100644
--- a/drivers/pci/controller/dwc/Makefile
+++ b/drivers/pci/controller/dwc/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
obj-$(CONFIG_PCI_LAYERSCAPE_EP) += pci-layerscape-ep.o
obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
obj-$(CONFIG_PCIE_QCOM_EP) += pcie-qcom-ep.o
+obj-$(CONFIG_PCIE_QCOM_COMMON) += pcie-qcom-common.o
obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
obj-$(CONFIG_PCIE_ROCKCHIP_DW) += pcie-dw-rockchip.o
diff --git a/drivers/pci/controller/dwc/pcie-qcom-common.c b/drivers/pci/controller/dwc/pcie-qcom-common.c
new file mode 100644
index 000000000000..1d8992147bba
--- /dev/null
+++ b/drivers/pci/controller/dwc/pcie-qcom-common.c
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014-2015, 2020 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2015, 2021 Linaro Limited.
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/interconnect.h>
+#include <linux/pm_opp.h>
+#include <linux/units.h>
+
+#include "../../pci.h"
+#include "pcie-designware.h"
+#include "pcie-qcom-common.h"
+
+struct icc_path *qcom_pcie_common_icc_get_resource(struct dw_pcie *pci, const char *path)
+{
+ struct icc_path *icc_p;
+
+ icc_p = devm_of_icc_get(pci->dev, path);
+ return icc_p;
+}
+EXPORT_SYMBOL_GPL(qcom_pcie_common_icc_get_resource);
+
+int qcom_pcie_common_icc_init(struct dw_pcie *pci, struct icc_path *icc, u32 bandwidth)
+{
+ int ret;
+
+ ret = icc_set_bw(icc, 0, bandwidth);
+ if (ret) {
+ dev_err(pci->dev, "Failed to set interconnect bandwidth: %d\n",
+ ret);
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(qcom_pcie_common_icc_init);
+
+void qcom_pcie_common_icc_update(struct dw_pcie *pci, struct icc_path *icc_mem)
+{
+ u32 offset, status, width, speed;
+ unsigned long freq_kbps;
+ struct dev_pm_opp *opp;
+ int ret, freq_mbps;
+
+ if (!icc_mem)
+ return;
+
+ offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
+ status = readw(pci->dbi_base + offset + PCI_EXP_LNKSTA);
+
+ /* Only update constraints if link is up. */
+ if (!(status & PCI_EXP_LNKSTA_DLLLA))
+ return;
+
+ speed = FIELD_GET(PCI_EXP_LNKSTA_CLS, status);
+ width = FIELD_GET(PCI_EXP_LNKSTA_NLW, status);
+
+ if (icc_mem) {
+ ret = icc_set_bw(icc_mem, 0,
+ width * QCOM_PCIE_LINK_SPEED_TO_BW(speed));
+ if (ret) {
+ dev_err(pci->dev, "Failed to set bandwidth for PCIe-MEM interconnect path: %d\n",
+ ret);
+ }
+ } else {
+ freq_mbps = pcie_dev_speed_mbps(pcie_link_speed[speed]);
+ if (freq_mbps < 0)
+ return;
+
+ freq_kbps = freq_mbps * KILO;
+ opp = dev_pm_opp_find_freq_exact(pci->dev, freq_kbps * width,
+ true);
+ if (!IS_ERR(opp)) {
+ ret = dev_pm_opp_set_opp(pci->dev, opp);
+ if (ret)
+ dev_err(pci->dev, "Failed to set OPP for freq (%lu): %d\n",
+ freq_kbps * width, ret);
+ dev_pm_opp_put(opp);
+ }
+
+ }
+
+}
+EXPORT_SYMBOL_GPL(qcom_pcie_common_icc_update);
diff --git a/drivers/pci/controller/dwc/pcie-qcom-common.h b/drivers/pci/controller/dwc/pcie-qcom-common.h
new file mode 100644
index 000000000000..897fa18e618a
--- /dev/null
+++ b/drivers/pci/controller/dwc/pcie-qcom-common.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2014-2015, 2020 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2015, 2021 Linaro Limited.
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include "pcie-designware.h"
+
+#define QCOM_PCIE_LINK_SPEED_TO_BW(speed) \
+ Mbps_to_icc(PCIE_SPEED2MBS_ENC(pcie_link_speed[speed]))
+
+struct icc_path *qcom_pcie_common_icc_get_resource(struct dw_pcie *pci, const char *path);
+int qcom_pcie_common_icc_init(struct dw_pcie *pci, struct icc_path *icc_mem, u32 bandwidth);
+void qcom_pcie_common_icc_update(struct dw_pcie *pci, struct icc_path *icc_mem);
diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
index 236229f66c80..e1860026e134 100644
--- a/drivers/pci/controller/dwc/pcie-qcom-ep.c
+++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
@@ -25,6 +25,7 @@
#include "../../pci.h"
#include "pcie-designware.h"
+#include "pcie-qcom-common.h"
/* PARF registers */
#define PARF_SYS_CTRL 0x00
@@ -142,9 +143,6 @@
#define CORE_RESET_TIME_US_MAX 1005
#define WAKE_DELAY_US 2000 /* 2 ms */
-#define QCOM_PCIE_LINK_SPEED_TO_BW(speed) \
- Mbps_to_icc(PCIE_SPEED2MBS_ENC(pcie_link_speed[speed]))
-
#define to_pcie_ep(x) dev_get_drvdata((x)->dev)
enum qcom_pcie_ep_link_status {
@@ -295,28 +293,6 @@ static void qcom_pcie_dw_write_dbi2(struct dw_pcie *pci, void __iomem *base,
writel(0, pcie_ep->elbi + ELBI_CS2_ENABLE);
}
-static void qcom_pcie_ep_icc_update(struct qcom_pcie_ep *pcie_ep)
-{
- struct dw_pcie *pci = &pcie_ep->pci;
- u32 offset, status;
- int speed, width;
- int ret;
-
- if (!pcie_ep->icc_mem)
- return;
-
- offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
- status = readw(pci->dbi_base + offset + PCI_EXP_LNKSTA);
-
- speed = FIELD_GET(PCI_EXP_LNKSTA_CLS, status);
- width = FIELD_GET(PCI_EXP_LNKSTA_NLW, status);
-
- ret = icc_set_bw(pcie_ep->icc_mem, 0, width * QCOM_PCIE_LINK_SPEED_TO_BW(speed));
- if (ret)
- dev_err(pci->dev, "failed to set interconnect bandwidth: %d\n",
- ret);
-}
-
static int qcom_pcie_enable_resources(struct qcom_pcie_ep *pcie_ep)
{
struct dw_pcie *pci = &pcie_ep->pci;
@@ -342,14 +318,7 @@ static int qcom_pcie_enable_resources(struct qcom_pcie_ep *pcie_ep)
if (ret)
goto err_phy_exit;
- /*
- * Some Qualcomm platforms require interconnect bandwidth constraints
- * to be set before enabling interconnect clocks.
- *
- * Set an initial peak bandwidth corresponding to single-lane Gen 1
- * for the pcie-mem path.
- */
- ret = icc_set_bw(pcie_ep->icc_mem, 0, QCOM_PCIE_LINK_SPEED_TO_BW(1));
+ ret = qcom_pcie_common_icc_init(pci, pcie_ep->icc_mem);
if (ret) {
dev_err(pci->dev, "failed to set interconnect bandwidth: %d\n",
ret);
@@ -633,7 +602,7 @@ static int qcom_pcie_ep_get_resources(struct platform_device *pdev,
if (IS_ERR(pcie_ep->phy))
ret = PTR_ERR(pcie_ep->phy);
- pcie_ep->icc_mem = devm_of_icc_get(dev, "pcie-mem");
+ pcie_ep->icc_mem = qcom_pcie_common_icc_get_resource(&pcie_ep->pci, "pcie-mem");
if (IS_ERR(pcie_ep->icc_mem))
ret = PTR_ERR(pcie_ep->icc_mem);
@@ -660,7 +629,7 @@ static irqreturn_t qcom_pcie_ep_global_irq_thread(int irq, void *data)
} else if (FIELD_GET(PARF_INT_ALL_BME, status)) {
dev_dbg(dev, "Received Bus Master Enable event\n");
pcie_ep->link_status = QCOM_PCIE_EP_LINK_ENABLED;
- qcom_pcie_ep_icc_update(pcie_ep);
+ qcom_pcie_common_icc_update(pci, pcie_ep->icc_mem);
pci_epc_bus_master_enable_notify(pci->ep.epc);
} else if (FIELD_GET(PARF_INT_ALL_PM_TURNOFF, status)) {
dev_dbg(dev, "Received PM Turn-off event! Entering L23\n");
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 0180edf3310e..ee32590f1506 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -31,9 +31,9 @@
#include <linux/reset.h>
#include <linux/slab.h>
#include <linux/types.h>
-#include <linux/units.h>
#include "../../pci.h"
+#include "pcie-qcom-common.h"
#include "pcie-designware.h"
/* PARF registers */
@@ -158,9 +158,6 @@
#define QCOM_PCIE_CRC8_POLYNOMIAL (BIT(2) | BIT(1) | BIT(0))
-#define QCOM_PCIE_LINK_SPEED_TO_BW(speed) \
- Mbps_to_icc(PCIE_SPEED2MBS_ENC(pcie_link_speed[speed]))
-
struct qcom_pcie_resources_1_0_0 {
struct clk_bulk_data *clks;
int num_clks;
@@ -1365,92 +1362,6 @@ static const struct dw_pcie_ops dw_pcie_ops = {
.start_link = qcom_pcie_start_link,
};
-static int qcom_pcie_icc_init(struct qcom_pcie *pcie)
-{
- struct dw_pcie *pci = pcie->pci;
- int ret;
-
- pcie->icc_mem = devm_of_icc_get(pci->dev, "pcie-mem");
- if (IS_ERR(pcie->icc_mem))
- return PTR_ERR(pcie->icc_mem);
-
- pcie->icc_cpu = devm_of_icc_get(pci->dev, "cpu-pcie");
- if (IS_ERR(pcie->icc_cpu))
- return PTR_ERR(pcie->icc_cpu);
- /*
- * Some Qualcomm platforms require interconnect bandwidth constraints
- * to be set before enabling interconnect clocks.
- *
- * Set an initial peak bandwidth corresponding to single-lane Gen 1
- * for the pcie-mem path.
- */
- ret = icc_set_bw(pcie->icc_mem, 0, QCOM_PCIE_LINK_SPEED_TO_BW(1));
- if (ret) {
- dev_err(pci->dev, "Failed to set bandwidth for PCIe-MEM interconnect path: %d\n",
- ret);
- return ret;
- }
-
- /*
- * Since the CPU-PCIe path is only used for activities like register
- * access of the host controller and endpoint Config/BAR space access,
- * HW team has recommended to use a minimal bandwidth of 1KBps just to
- * keep the path active.
- */
- ret = icc_set_bw(pcie->icc_cpu, 0, kBps_to_icc(1));
- if (ret) {
- dev_err(pci->dev, "Failed to set bandwidth for CPU-PCIe interconnect path: %d\n",
- ret);
- icc_set_bw(pcie->icc_mem, 0, 0);
- return ret;
- }
-
- return 0;
-}
-
-static void qcom_pcie_icc_opp_update(struct qcom_pcie *pcie)
-{
- u32 offset, status, width, speed;
- struct dw_pcie *pci = pcie->pci;
- unsigned long freq_kbps;
- struct dev_pm_opp *opp;
- int ret, freq_mbps;
-
- offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
- status = readw(pci->dbi_base + offset + PCI_EXP_LNKSTA);
-
- /* Only update constraints if link is up. */
- if (!(status & PCI_EXP_LNKSTA_DLLLA))
- return;
-
- speed = FIELD_GET(PCI_EXP_LNKSTA_CLS, status);
- width = FIELD_GET(PCI_EXP_LNKSTA_NLW, status);
-
- if (pcie->icc_mem) {
- ret = icc_set_bw(pcie->icc_mem, 0,
- width * QCOM_PCIE_LINK_SPEED_TO_BW(speed));
- if (ret) {
- dev_err(pci->dev, "Failed to set bandwidth for PCIe-MEM interconnect path: %d\n",
- ret);
- }
- } else {
- freq_mbps = pcie_dev_speed_mbps(pcie_link_speed[speed]);
- if (freq_mbps < 0)
- return;
-
- freq_kbps = freq_mbps * KILO;
- opp = dev_pm_opp_find_freq_exact(pci->dev, freq_kbps * width,
- true);
- if (!IS_ERR(opp)) {
- ret = dev_pm_opp_set_opp(pci->dev, opp);
- if (ret)
- dev_err(pci->dev, "Failed to set OPP for freq (%lu): %d\n",
- freq_kbps * width, ret);
- dev_pm_opp_put(opp);
- }
- }
-}
-
static int qcom_pcie_link_transition_count(struct seq_file *s, void *data)
{
struct qcom_pcie *pcie = (struct qcom_pcie *)dev_get_drvdata(s->private);
@@ -1561,6 +1472,18 @@ static int qcom_pcie_probe(struct platform_device *pdev)
goto err_pm_runtime_put;
}
+ pcie->icc_mem = qcom_pcie_common_icc_get_resource(pcie->pci, "pcie-mem");
+ if (IS_ERR_OR_NULL(pcie->icc_mem)) {
+ ret = PTR_ERR(pcie->icc_mem);
+ goto err_pm_runtime_put;
+ }
+
+ pcie->icc_cpu = qcom_pcie_common_icc_get_resource(pcie->pci, "cpu-pcie");
+ if (IS_ERR_OR_NULL(pcie->icc_cpu)) {
+ ret = PTR_ERR(pcie->icc_cpu);
+ goto err_pm_runtime_put;
+ }
+
/* OPP table is optional */
ret = devm_pm_opp_of_add_table(dev);
if (ret && ret != -ENODEV) {
@@ -1593,10 +1516,35 @@ static int qcom_pcie_probe(struct platform_device *pdev)
goto err_pm_runtime_put;
}
} else {
- /* Skip ICC init if OPP is supported as it is handled by OPP */
- ret = qcom_pcie_icc_init(pcie);
- if (ret)
+ /*
+ * Some Qualcomm platforms require interconnect bandwidth
+ * constraints to be set before enabling interconnect clocks
+ * Set an initial peak bandwidth corresponding to single-lane
+ * Gen 1 for the pcie-mem path.
+ */
+ ret = qcom_pcie_common_icc_init(pcie->pci, pcie->icc_mem,
+ QCOM_PCIE_LINK_SPEED_TO_BW(1));
+ if (ret) {
+ dev_err(pci->dev,
+ "Failed to set bandwidth for PCIe-MEM interconnect path: %d\n",
+ ret);
goto err_pm_runtime_put;
+ }
+
+ /*
+ * Since the CPU-PCIe path is only used for activities
+ * like register access of the host controller and
+ * endpoint Config/BAR space access, HW team has
+ * recommended to use a minimal bandwidth of 1KBps just to
+ * keep the path active.
+ */
+ ret = qcom_pcie_common_icc_init(pcie->pci, pcie->icc_cpu, kBps_to_icc(1));
+ if (ret) {
+ dev_err(pci->dev,
+ "Failed to set bandwidth for CPU-PCIe interconnect path: %d\n",
+ ret);
+ goto err_pm_runtime_put;
+ }
}
ret = pcie->cfg->ops->get_resources(pcie);
@@ -1617,7 +1565,7 @@ static int qcom_pcie_probe(struct platform_device *pdev)
goto err_phy_exit;
}
- qcom_pcie_icc_opp_update(pcie);
+ qcom_pcie_common_icc_update(pcie->pci, pcie->icc_mem);
if (pcie->mhi)
qcom_pcie_init_debugfs(pcie);
@@ -1681,7 +1629,8 @@ static int qcom_pcie_suspend_noirq(struct device *dev)
if (pm_suspend_target_state != PM_SUSPEND_MEM) {
ret = icc_disable(pcie->icc_cpu);
if (ret)
- dev_err(dev, "Failed to disable CPU-PCIe interconnect path: %d\n", ret);
+ dev_err(dev,
+ "Failed to disable CPU-PCIe interconnect path: %d\n", ret);
if (!pcie->icc_mem)
dev_pm_opp_set_opp(pcie->pci->dev, NULL);
@@ -1710,7 +1659,7 @@ static int qcom_pcie_resume_noirq(struct device *dev)
pcie->suspended = false;
}
- qcom_pcie_icc_opp_update(pcie);
+ qcom_pcie_common_icc_update(pcie->pci, pcie->icc_mem);
return 0;
}
--
2.46.0
