Add device tree bindings for the clock generator found in RP1 multi function device, and relative entries in MAINTAINERS file. Signed-off-by: Andrea della Porta <andrea.porta@xxxxxxxx> --- .../clock/raspberrypi,rp1-clocks.yaml | 87 +++++++++++++++++++ MAINTAINERS | 6 ++ include/dt-bindings/clock/rp1.h | 56 ++++++++++++ 3 files changed, 149 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml create mode 100644 include/dt-bindings/clock/rp1.h diff --git a/Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml b/Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml new file mode 100644 index 000000000000..b27db86d0572 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/raspberrypi,rp1-clocks.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RaspberryPi RP1 clock generator + +maintainers: + - Andrea della Porta <andrea.porta@xxxxxxxx> + +description: | + The RP1 contains a clock generator designed as three PLLs (CORE, AUDIO, + VIDEO), and each PLL output can be programmed though dividers to generate + the clocks to drive the sub-peripherals embedded inside the chipset. + + Link to datasheet: + https://datasheets.raspberrypi.com/rp1/rp1-peripherals.pdf + +properties: + compatible: + const: raspberrypi,rp1-clocks + + reg: + maxItems: 1 + + '#clock-cells': + description: + The index in the assigned-clocks is mapped to the output clock as per + definitions in dt-bindings/clock/rp1.h. + const: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - '#clock-cells' + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rp1.h> + + rp1 { + #address-cells = <2>; + #size-cells = <2>; + + rp1_clocks: clocks@18000 { + compatible = "raspberrypi,rp1-clocks"; + reg = <0xc0 0x40018000 0x0 0x10038>; + #clock-cells = <1>; + clocks = <&clk_xosc>; + + assigned-clocks = <&rp1_clocks RP1_PLL_SYS_CORE>, + <&rp1_clocks RP1_PLL_AUDIO_CORE>, + /* RP1_PLL_VIDEO_CORE and dividers are now managed by VEC,DPI drivers */ + <&rp1_clocks RP1_PLL_SYS>, + <&rp1_clocks RP1_PLL_SYS_SEC>, + <&rp1_clocks RP1_PLL_AUDIO>, + <&rp1_clocks RP1_PLL_AUDIO_SEC>, + <&rp1_clocks RP1_CLK_SYS>, + <&rp1_clocks RP1_PLL_SYS_PRI_PH>, + /* RP1_CLK_SLOW_SYS is used for the frequency counter (FC0) */ + <&rp1_clocks RP1_CLK_SLOW_SYS>, + <&rp1_clocks RP1_CLK_SDIO_TIMER>, + <&rp1_clocks RP1_CLK_SDIO_ALT_SRC>, + <&rp1_clocks RP1_CLK_ETH_TSU>; + + assigned-clock-rates = <1000000000>, // RP1_PLL_SYS_CORE + <1536000000>, // RP1_PLL_AUDIO_CORE + <200000000>, // RP1_PLL_SYS + <125000000>, // RP1_PLL_SYS_SEC + <61440000>, // RP1_PLL_AUDIO + <192000000>, // RP1_PLL_AUDIO_SEC + <200000000>, // RP1_CLK_SYS + <100000000>, // RP1_PLL_SYS_PRI_PH + /* Must match the XOSC frequency */ + <50000000>, // RP1_CLK_SLOW_SYS + <1000000>, // RP1_CLK_SDIO_TIMER + <200000000>, // RP1_CLK_SDIO_ALT_SRC + <50000000>; // RP1_CLK_ETH_TSU + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 42decde38320..6e7db9bce278 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19116,6 +19116,12 @@ F: Documentation/devicetree/bindings/media/raspberrypi,pispbe.yaml F: drivers/media/platform/raspberrypi/pisp_be/ F: include/uapi/linux/media/raspberrypi/ +RASPBERRY PI RP1 PCI DRIVER +M: Andrea della Porta <andrea.porta@xxxxxxxx> +S: Maintained +F: Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml +F: include/dt-bindings/clock/rp1.h + RC-CORE / LIRC FRAMEWORK M: Sean Young <sean@xxxxxxxx> L: linux-media@xxxxxxxxxxxxxxx diff --git a/include/dt-bindings/clock/rp1.h b/include/dt-bindings/clock/rp1.h new file mode 100644 index 000000000000..1ed67b8a5229 --- /dev/null +++ b/include/dt-bindings/clock/rp1.h @@ -0,0 +1,56 @@ +/* SPDX-License-Identifier: GPL-2.0 OR MIT */ +/* + * Copyright (C) 2021 Raspberry Pi Ltd. + */ + +#define RP1_PLL_SYS_CORE 0 +#define RP1_PLL_AUDIO_CORE 1 +#define RP1_PLL_VIDEO_CORE 2 + +#define RP1_PLL_SYS 3 +#define RP1_PLL_AUDIO 4 +#define RP1_PLL_VIDEO 5 + +#define RP1_PLL_SYS_PRI_PH 6 +#define RP1_PLL_SYS_SEC_PH 7 +#define RP1_PLL_AUDIO_PRI_PH 8 + +#define RP1_PLL_SYS_SEC 9 +#define RP1_PLL_AUDIO_SEC 10 +#define RP1_PLL_VIDEO_SEC 11 + +#define RP1_CLK_SYS 12 +#define RP1_CLK_SLOW_SYS 13 +#define RP1_CLK_DMA 14 +#define RP1_CLK_UART 15 +#define RP1_CLK_ETH 16 +#define RP1_CLK_PWM0 17 +#define RP1_CLK_PWM1 18 +#define RP1_CLK_AUDIO_IN 19 +#define RP1_CLK_AUDIO_OUT 20 +#define RP1_CLK_I2S 21 +#define RP1_CLK_MIPI0_CFG 22 +#define RP1_CLK_MIPI1_CFG 23 +#define RP1_CLK_PCIE_AUX 24 +#define RP1_CLK_USBH0_MICROFRAME 25 +#define RP1_CLK_USBH1_MICROFRAME 26 +#define RP1_CLK_USBH0_SUSPEND 27 +#define RP1_CLK_USBH1_SUSPEND 28 +#define RP1_CLK_ETH_TSU 29 +#define RP1_CLK_ADC 30 +#define RP1_CLK_SDIO_TIMER 31 +#define RP1_CLK_SDIO_ALT_SRC 32 +#define RP1_CLK_GP0 33 +#define RP1_CLK_GP1 34 +#define RP1_CLK_GP2 35 +#define RP1_CLK_GP3 36 +#define RP1_CLK_GP4 37 +#define RP1_CLK_GP5 38 +#define RP1_CLK_VEC 39 +#define RP1_CLK_DPI 40 +#define RP1_CLK_MIPI0_DPI 41 +#define RP1_CLK_MIPI1_DPI 42 + +/* Extra PLL output channels - RP1B0 only */ +#define RP1_PLL_VIDEO_PRI_PH 43 +#define RP1_PLL_AUDIO_TERN 44 -- 2.35.3
