On 5/31/24 12:13, Sean Anderson wrote: > Add phy subsystem support for the xilinx-nwl PCIe controller. This > series also includes several small fixes and improvements. > > Changes in v4: > - Clarify dt-bindings commit subject/message > - Explain likely effects of the off-by-one error > - Trim down UBSAN backtrace > - Move if to after pci_host_probe > - Remove if in err_phy > - Fix error path in phy_enable skipping the first phy > - Disable phys in reverse order > - Use dev_err instead of WARN for errors > > Changes in v3: > - Document phys property > - Expand off-by-one commit message > > Changes in v2: > - Remove phy-names > - Add an example > - Get phys by index and not by name > > Sean Anderson (7): > dt-bindings: pci: xilinx-nwl: Add phys property > PCI: xilinx-nwl: Fix off-by-one in IRQ handler > PCI: xilinx-nwl: Fix register misspelling > PCI: xilinx-nwl: Rate-limit misc interrupt messages > PCI: xilinx-nwl: Clean up clock on probe failure/removal > PCI: xilinx-nwl: Add phy support > arm64: zynqmp: Add PCIe phys > > .../bindings/pci/xlnx,nwl-pcie.yaml | 7 + > .../boot/dts/xilinx/zynqmp-zcu102-revA.dts | 1 + > drivers/pci/controller/pcie-xilinx-nwl.c | 139 +++++++++++++++--- > 3 files changed, 124 insertions(+), 23 deletions(-) > ping. --Sean
