RE: [PATCH v3 1/7] arm64: hyperv: Use SMC to detect hypervisor presence

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Roman Kisel <romank@xxxxxxxxxxxxxxxxxxx> Sent: Friday, July 26, 2024 3:59 PM
> 
> The arm64 Hyper-V startup path relies on ACPI to detect
> running under a Hyper-V compatible hypervisor. That
> doesn't work on non-ACPI systems.
> 
> Hoist the ACPI detection logic into a separate function,
> use the new SMC added recently to Hyper-V to use in the
> non-ACPI case.

Wording seems slightly messed up.  Perhaps:

   Hoist the ACPI detection logic into a separate function. Then
   use the new SMC added recently to Hyper-V in the non-ACPI
   case.

Also, the phrase "the new SMC" seems a bit off to me.  The "Terms and
Abbreviations" section of the SMCCC specification defines "SMC" as
an instruction:

   Secure Monitor Call. An Arm assembler instruction that causes an
   exception that is taken synchronously into EL3.

More precisely, I think you mean a SMC "function identifier" that is
newly implemented by Hyper-V.  And the function identifier itself isn't
new; it's the Hyper-V implementation that's new.

Similar comment applies in the cover letter for this patch set, and
perhaps to the Subject line of this patch.

> 
> Signed-off-by: Roman Kisel <romank@xxxxxxxxxxxxxxxxxxx>
> ---
>  arch/arm64/hyperv/mshyperv.c      | 36 ++++++++++++++++++++++++++-----
>  arch/arm64/include/asm/mshyperv.h |  5 +++++
>  2 files changed, 36 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm64/hyperv/mshyperv.c b/arch/arm64/hyperv/mshyperv.c
> index b1a4de4eee29..341f98312667 100644
> --- a/arch/arm64/hyperv/mshyperv.c
> +++ b/arch/arm64/hyperv/mshyperv.c
> @@ -27,6 +27,34 @@ int hv_get_hypervisor_version(union hv_hypervisor_version_info *info)
>  	return 0;
>  }
> 
> +static bool hyperv_detect_via_acpi(void)
> +{
> +	if (acpi_disabled)
> +		return false;
> +#if IS_ENABLED(CONFIG_ACPI)
> +	/* Hypervisor ID is only available in ACPI v6+. */
> +	if (acpi_gbl_FADT.header.revision < 6)
> +		return false;
> +	return strncmp((char *)&acpi_gbl_FADT.hypervisor_id, "MsHyperV", 8) == 0;
> +#else
> +	return false;
> +#endif
> +}
> +
> +static bool hyperv_detect_via_smc(void)
> +{
> +	struct arm_smccc_res res = {};
> +
> +	if (arm_smccc_1_1_get_conduit() != SMCCC_CONDUIT_HVC)
> +		return false;
> +	arm_smccc_1_1_hvc(ARM_SMCCC_VENDOR_HYP_CALL_UID_FUNC_ID, &res);
> +
> +	return res.a0 == ARM_SMCCC_VENDOR_HYP_UID_HYPERV_REG_0 &&
> +		res.a1 == ARM_SMCCC_VENDOR_HYP_UID_HYPERV_REG_1 &&
> +		res.a2 == ARM_SMCCC_VENDOR_HYP_UID_HYPERV_REG_2 &&
> +		res.a3 == ARM_SMCCC_VENDOR_HYP_UID_HYPERV_REG_3;
> +}
> +
>  static int __init hyperv_init(void)
>  {
>  	struct hv_get_vp_registers_output	result;
> @@ -35,13 +63,11 @@ static int __init hyperv_init(void)
> 
>  	/*
>  	 * Allow for a kernel built with CONFIG_HYPERV to be running in
> -	 * a non-Hyper-V environment, including on DT instead of ACPI.
> +	 * a non-Hyper-V environment.
> +	 *
>  	 * In such cases, do nothing and return success.
>  	 */
> -	if (acpi_disabled)
> -		return 0;
> -
> -	if (strncmp((char *)&acpi_gbl_FADT.hypervisor_id, "MsHyperV", 8))
> +	if (!hyperv_detect_via_acpi() && !hyperv_detect_via_smc())
>  		return 0;
> 
>  	/* Setup the guest ID */
> diff --git a/arch/arm64/include/asm/mshyperv.h
> b/arch/arm64/include/asm/mshyperv.h
> index a975e1a689dd..a7a3586f7cb1 100644
> --- a/arch/arm64/include/asm/mshyperv.h
> +++ b/arch/arm64/include/asm/mshyperv.h
> @@ -51,4 +51,9 @@ static inline u64 hv_get_msr(unsigned int reg)
> 
>  #include <asm-generic/mshyperv.h>
> 
> +#define ARM_SMCCC_VENDOR_HYP_UID_HYPERV_REG_0	0x7948734d
> +#define ARM_SMCCC_VENDOR_HYP_UID_HYPERV_REG_1	0x56726570
> +#define ARM_SMCCC_VENDOR_HYP_UID_HYPERV_REG_2	0
> +#define ARM_SMCCC_VENDOR_HYP_UID_HYPERV_REG_3	0
> +

Section 6.2 of the SMCCC specification says that the "Call UID Query"
returns a UUID. The above #defines look like an ASCII string is being
returned. Arguably the ASCII string can be treated as a set of 128 bits
just like a UUID, but it doesn't meet the spirit of the spec. Can Hyper-V
be changed to return a real UUID? While the distinction probably
won't make a material difference here, we've had problems in the past
with Hyper-V doing slightly weird things that later caused unexpected
trouble. Please just get it right. :-)

Michael

>  #endif
> --
> 2.34.1
> 






[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux