On Thu, Jul 11, 2024 at 05:25:31PM +0200, Francesco Dolcini wrote:
> Hello Niklas,
>
> On Thu, Jul 11, 2024 at 04:21:34PM +0200, Niklas Cassel wrote:
> > On Wed, Jul 03, 2024 at 12:00:34PM +0200, Francesco Dolcini wrote:
> > > From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
> > >
> > > Fix PCIe PERST# signal polarity in TI J721E used on TI K3 machines.
> > >
> > > PCIe PERST# needs to be de-asserted for PCIe to work, however, the driver is
> > > doing the opposite and the device tree files are defining the signal with the
> > > wrong polarity to cope with that. Fix both the driver and the affected DT
> > > files.
> >
> > While I understand why you want to fix this,
> > I'm not sure if you can actually do so without breaking device tree backwards
> > compatibility.
>
> I understand this, and at the same time I know that this was done in the
> past for exactly the same reason, see for example commit 87620512681a
> ("PCI: apple: Fix PERST# polarity").
If you knew about it, I think that you should have stated that your are
breaking DT compatibility in the commit message, while also explaining it
is acceptable in your specific case.
I didn't know that there were other examples of drivers doing this.
Looking at your example, it seems that both:
1e33888fbe44 ("PCI: apple: Add initial hardware bring-up")
and
87620512681a ("PCI: apple: Fix PERST# polarity")
were first included in v5.16, so there was never a kernel release
with only one of the commits.
Anyway, I will eagerly await the DT maintainers feedback on this series.
Kind regards,
Niklas
