Hi, >> Added aspm suspend/resume hooks that run >> before and after suspend and resume to change >> the ASPM states of the PCI bus in order to allow >> the system suspend while trying to prevent card hangs > > Why is this needed? Is there a r8169 defect we're working around? > A BIOS defect? Is there a problem report you can reference here? > We encountered this issue while upgrading from kernel v6.1 to v6.6. The system would not suspend with 6.6. We tracked down the problem to the NIC of the device, mainly that the following code was removed in 6.6: > else if (tp->mac_version >= RTL_GIGA_MAC_VER_46) > rc = pci_disable_link_state(pdev, PCIE_LINK_STATE_L1_2); For the listed devices, ASPM L1 is disabled entirely in 6.6. As for the reason, L1 was observed to cause some problems (https://bugzilla.kernel.org/show_bug.cgi?id=217814). We use a Raptor Lake soc and it won't change residency if the NIC doesn't have L1 enabled. I saw in 6.1 the following comment: > Chips from RTL8168h partially have issues with L1.2, but seem > to work fine with L1 and L1.1. I was thinking that disabling/enabling L1.1 on the fly before/after suspend could help mitigate the risk associated with L1/L1.1 . I know that ASPM settings are exposed in sysfs and that this could be done from outside the kernel, that was my first approach, but it was suggested to me that this kind of workaround would be better suited for quirks. I did around 1000 suspend/resume cycles of 16-30 seconds each (correcting the resume dev->bus->self being configured twice mistake) and did not notice any problems. What do you think, is this a good approach ... ? >> + //configure device >> + pcie_capability_clear_and_set_word(dev, PCI_EXP_LNKCTL, >> + PCI_EXP_LNKCTL_ASPMC, 0); >> + >> + pci_read_config_word(dev->bus->self, >> + dev->bus->self->l1ss + PCI_L1SS_CTL1, >> + &val); >> + val = val & ~PCI_L1SS_CTL1_L1SS_MASK; >> + pci_write_config_word(dev->bus->self, >> + dev->bus->self->l1ss + PCI_L1SS_CTL1, >> + val); > Updates the parent (dev->bus->self) twice; was the first one supposed > to update the device (dev)? Yes, it was supposed to update the device (dev). It's my first time sending a patch and I messed something up while doing some style changes, I will correct it. I'm sorry for that. > This doesn't restore the state as it existed before suspend. Does > this rely on other parts of restore to do that? It operates on the assumption that after driver initialization PCI_EXP_LNKCTL_ASPMC is 0 and that there are no states enabled in CTL1. I did a lspci -vvv dump on the affected devices before and after the quirks ran and saw no difference. This could be improved. > What is the RTL8168 chip version used on these systems? It should be RTL8111H. > What's the root cause of the issue? > A silicon bug on the host side? I think it's the ASPM implementation of the soc. > ASPM L1 is disabled per default in r8169. So why is the patch needed > at all? Leaving it disabled all the time prevents the system from suspending. Thank you, George-Daniel Matei On Tue, Jul 9, 2024 at 12:15 AM Heiner Kallweit <hkallweit1@xxxxxxxxx> wrote: > > On 08.07.2024 19:23, Bjorn Helgaas wrote: > > [+cc r8169 folks] > > > > On Mon, Jul 08, 2024 at 03:38:15PM +0000, George-Daniel Matei wrote: > >> Added aspm suspend/resume hooks that run > >> before and after suspend and resume to change > >> the ASPM states of the PCI bus in order to allow > >> the system suspend while trying to prevent card hangs > > > > Why is this needed? Is there a r8169 defect we're working around? > > A BIOS defect? Is there a problem report you can reference here? > > > > Basically the same question from my side. Apparently such a workaround > isn't needed on any other system. And Realtek NICs can be found on more > or less every consumer system. What's the root cause of the issue? > A silicon bug on the host side? > > What is the RTL8168 chip version used on these systems? > > ASPM L1 is disabled per default in r8169. So why is the patch needed > at all? > > > s/Added/Add/ > > > > s/aspm/ASPM/ above > > > > s/PCI bus/device and parent/ > > > > Add period at end of sentence. > > > > Rewrap to fill 75 columns. > > > >> Signed-off-by: George-Daniel Matei <danielgeorgem@xxxxxxxxxxxx> > >> --- > >> drivers/pci/quirks.c | 142 +++++++++++++++++++++++++++++++++++++++++++ > >> 1 file changed, 142 insertions(+) > >> > >> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c > >> index dc12d4a06e21..aa3dba2211d3 100644 > >> --- a/drivers/pci/quirks.c > >> +++ b/drivers/pci/quirks.c > >> @@ -6189,6 +6189,148 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56b0, aspm_l1_acceptable_latency > >> DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56b1, aspm_l1_acceptable_latency); > >> DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56c0, aspm_l1_acceptable_latency); > >> DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56c1, aspm_l1_acceptable_latency); > >> + > >> +static const struct dmi_system_id chromebox_match_table[] = { > >> + { > >> + .matches = { > >> + DMI_MATCH(DMI_PRODUCT_NAME, "Brask"), > >> + DMI_MATCH(DMI_BIOS_VENDOR, "coreboot"), > >> + } > >> + }, > >> + { > >> + .matches = { > >> + DMI_MATCH(DMI_PRODUCT_NAME, "Aurash"), > >> + DMI_MATCH(DMI_BIOS_VENDOR, "coreboot"), > >> + } > >> + }, > >> + { > >> + .matches = { > >> + DMI_MATCH(DMI_PRODUCT_NAME, "Bujia"), > >> + DMI_MATCH(DMI_BIOS_VENDOR, "coreboot"), > >> + } > >> + }, > >> + { > >> + .matches = { > >> + DMI_MATCH(DMI_PRODUCT_NAME, "Gaelin"), > >> + DMI_MATCH(DMI_BIOS_VENDOR, "coreboot"), > >> + } > >> + }, > >> + { > >> + .matches = { > >> + DMI_MATCH(DMI_PRODUCT_NAME, "Gladios"), > >> + DMI_MATCH(DMI_BIOS_VENDOR, "coreboot"), > >> + } > >> + }, > >> + { > >> + .matches = { > >> + DMI_MATCH(DMI_PRODUCT_NAME, "Hahn"), > >> + DMI_MATCH(DMI_BIOS_VENDOR, "coreboot"), > >> + } > >> + }, > >> + { > >> + .matches = { > >> + DMI_MATCH(DMI_PRODUCT_NAME, "Jeev"), > >> + DMI_MATCH(DMI_BIOS_VENDOR, "coreboot"), > >> + } > >> + }, > >> + { > >> + .matches = { > >> + DMI_MATCH(DMI_PRODUCT_NAME, "Kinox"), > >> + DMI_MATCH(DMI_BIOS_VENDOR, "coreboot"), > >> + } > >> + }, > >> + { > >> + .matches = { > >> + DMI_MATCH(DMI_PRODUCT_NAME, "Kuldax"), > >> + DMI_MATCH(DMI_BIOS_VENDOR, "coreboot"), > >> + } > >> + }, > >> + { > >> + .matches = { > >> + DMI_MATCH(DMI_PRODUCT_NAME, "Lisbon"), > >> + DMI_MATCH(DMI_BIOS_VENDOR, "coreboot"), > >> + } > >> + }, > >> + { > >> + .matches = { > >> + DMI_MATCH(DMI_PRODUCT_NAME, "Moli"), > >> + DMI_MATCH(DMI_BIOS_VENDOR, "coreboot"), > >> + } > >> + }, > >> + { } > >> +}; > >> + > >> +static void rtl8169_suspend_aspm_settings(struct pci_dev *dev) > >> +{ > >> + u16 val = 0; > >> + > >> + if (dmi_check_system(chromebox_match_table)) { > >> + //configure parent > >> + pcie_capability_clear_and_set_word(dev->bus->self, > >> + PCI_EXP_LNKCTL, > >> + PCI_EXP_LNKCTL_ASPMC, > >> + PCI_EXP_LNKCTL_ASPM_L1); > >> + > >> + pci_read_config_word(dev->bus->self, > >> + dev->bus->self->l1ss + PCI_L1SS_CTL1, > >> + &val); > >> + val = (val & ~PCI_L1SS_CTL1_L1SS_MASK) | > >> + PCI_L1SS_CTL1_PCIPM_L1_2 | PCI_L1SS_CTL1_PCIPM_L1_2 | > >> + PCI_L1SS_CTL1_ASPM_L1_1; > >> + pci_write_config_word(dev->bus->self, > >> + dev->bus->self->l1ss + PCI_L1SS_CTL1, > >> + val); > >> + > >> + //configure device > >> + pcie_capability_clear_and_set_word(dev, PCI_EXP_LNKCTL, > >> + PCI_EXP_LNKCTL_ASPMC, > >> + PCI_EXP_LNKCTL_ASPM_L1); > >> + > >> + pci_read_config_word(dev, dev->l1ss + PCI_L1SS_CTL1, &val); > >> + val = (val & ~PCI_L1SS_CTL1_L1SS_MASK) | > >> + PCI_L1SS_CTL1_PCIPM_L1_2 | PCI_L1SS_CTL1_PCIPM_L1_2 | > >> + PCI_L1SS_CTL1_ASPM_L1_1; > >> + pci_write_config_word(dev, dev->l1ss + PCI_L1SS_CTL1, val); > >> + } > >> +} > >> + > >> +DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_REALTEK, 0x8168, > >> + rtl8169_suspend_aspm_settings); > >> + > >> +static void rtl8169_resume_aspm_settings(struct pci_dev *dev) > >> +{ > >> + u16 val = 0; > >> + > >> + if (dmi_check_system(chromebox_match_table)) { > >> + //configure device > >> + pcie_capability_clear_and_set_word(dev, PCI_EXP_LNKCTL, > >> + PCI_EXP_LNKCTL_ASPMC, 0); > >> + > >> + pci_read_config_word(dev->bus->self, > >> + dev->bus->self->l1ss + PCI_L1SS_CTL1, > >> + &val); > >> + val = val & ~PCI_L1SS_CTL1_L1SS_MASK; > >> + pci_write_config_word(dev->bus->self, > >> + dev->bus->self->l1ss + PCI_L1SS_CTL1, > >> + val); > >> + > >> + //configure parent > >> + pcie_capability_clear_and_set_word(dev->bus->self, > >> + PCI_EXP_LNKCTL, > >> + PCI_EXP_LNKCTL_ASPMC, 0); > >> + > >> + pci_read_config_word(dev->bus->self, > >> + dev->bus->self->l1ss + PCI_L1SS_CTL1, > >> + &val); > >> + val = val & ~PCI_L1SS_CTL1_L1SS_MASK; > >> + pci_write_config_word(dev->bus->self, > >> + dev->bus->self->l1ss + PCI_L1SS_CTL1, > >> + val); > > > > Updates the parent (dev->bus->self) twice; was the first one supposed > > to update the device (dev)? > > > > This doesn't restore the state as it existed before suspend. Does > > this rely on other parts of restore to do that? > > > >> + } > >> +} > >> + > >> +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_REALTEK, 0x8168, > >> + rtl8169_resume_aspm_settings); > >> #endif > >> > >> #ifdef CONFIG_PCIE_DPC > >> -- > >> 2.45.2.803.g4e1b14247a-goog > >> >
