Hi Jim,
On 7/3/24 21:02, Jim Quinlan wrote:
> We've been assuming that if an SOC has a "rescal" reset controller that we
> should automatically invoke brcm_phy_cntl(...). This will not be true in
> future SOCs, so we create a bool "has_phy" and adjust the cfg_data
> appropriately (we need to give 7216 its own cfg_data structure instead of
> sharing one).
>
> Signed-off-by: Jim Quinlan <james.quinlan@xxxxxxxxxxxx>
> ---
> drivers/pci/controller/pcie-brcmstb.c | 17 ++++++++++++++---
> 1 file changed, 14 insertions(+), 3 deletions(-)
Reviewed-by: Stanimir Varbanov <svarbanov@xxxxxxx>
~Stan
>
> diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
> index 3aa82871e9b3..ffb3e8d8fb2a 100644
> --- a/drivers/pci/controller/pcie-brcmstb.c
> +++ b/drivers/pci/controller/pcie-brcmstb.c
> @@ -222,6 +222,7 @@ enum pcie_type {
> struct pcie_cfg_data {
> const int *offsets;
> const enum pcie_type type;
> + const bool has_phy;
> void (*perst_set)(struct brcm_pcie *pcie, u32 val);
> void (*bridge_sw_init_set)(struct brcm_pcie *pcie, u32 val);
> };
> @@ -272,6 +273,7 @@ struct brcm_pcie {
> void (*bridge_sw_init_set)(struct brcm_pcie *pcie, u32 val);
> struct subdev_regulators *sr;
> bool ep_wakeup_capable;
> + bool has_phy;
> };
>
> static inline bool is_bmips(const struct brcm_pcie *pcie)
> @@ -1311,12 +1313,12 @@ static int brcm_phy_cntl(struct brcm_pcie *pcie, const int start)
>
> static inline int brcm_phy_start(struct brcm_pcie *pcie)
> {
> - return pcie->rescal ? brcm_phy_cntl(pcie, 1) : 0;
> + return pcie->has_phy ? brcm_phy_cntl(pcie, 1) : 0;
> }
>
> static inline int brcm_phy_stop(struct brcm_pcie *pcie)
> {
> - return pcie->rescal ? brcm_phy_cntl(pcie, 0) : 0;
> + return pcie->has_phy ? brcm_phy_cntl(pcie, 0) : 0;
> }
>
> static void brcm_pcie_turn_off(struct brcm_pcie *pcie)
> @@ -1559,12 +1561,20 @@ static const struct pcie_cfg_data bcm2711_cfg = {
> .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
> };
>
> +static const struct pcie_cfg_data bcm7216_cfg = {
> + .offsets = pcie_offset_bcm7278,
> + .type = BCM7278,
> + .perst_set = brcm_pcie_perst_set_7278,
> + .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_7278,
> + .has_phy = true,
> +};
> +
> static const struct of_device_id brcm_pcie_match[] = {
> { .compatible = "brcm,bcm2711-pcie", .data = &bcm2711_cfg },
> { .compatible = "brcm,bcm4908-pcie", .data = &bcm4908_cfg },
> { .compatible = "brcm,bcm7211-pcie", .data = &generic_cfg },
> { .compatible = "brcm,bcm7278-pcie", .data = &bcm7278_cfg },
> - { .compatible = "brcm,bcm7216-pcie", .data = &bcm7278_cfg },
> + { .compatible = "brcm,bcm7216-pcie", .data = &bcm7216_cfg },
> { .compatible = "brcm,bcm7445-pcie", .data = &generic_cfg },
> { .compatible = "brcm,bcm7435-pcie", .data = &bcm7435_cfg },
> { .compatible = "brcm,bcm7425-pcie", .data = &bcm7425_cfg },
> @@ -1612,6 +1622,7 @@ static int brcm_pcie_probe(struct platform_device *pdev)
> pcie->type = data->type;
> pcie->perst_set = data->perst_set;
> pcie->bridge_sw_init_set = data->bridge_sw_init_set;
> + pcie->has_phy = data->has_phy;
>
> pcie->base = devm_platform_ioremap_resource(pdev, 0);
> if (IS_ERR(pcie->base))
