On Mon, 24 Jun 2024 16:12:38 +0530, Thippeswamy Havalige wrote: > Add YAML devicetree schemas for Xilinx QDMA Soft IP PCIe Root Port Bridge. > > Signed-off-by: Thippeswamy Havalige <thippesw@xxxxxxx> > --- > .../devicetree/bindings/pci/xlnx,xdma-host.yaml | 41 ++++++++++++++++++++-- > 1 file changed, 39 insertions(+), 2 deletions(-) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/pci/xlnx,xdma-host.example.dts:55.31-79.15: Warning (pci_bridge): /example-0/soc/axi-pcie@80000000: node name is not "pci" or "pcie" Documentation/devicetree/bindings/pci/xlnx,xdma-host.example.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' Documentation/devicetree/bindings/pci/xlnx,xdma-host.example.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' Documentation/devicetree/bindings/pci/xlnx,xdma-host.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/xlnx,xdma-host.example.dtb: axi-pcie@80000000: $nodename:0: 'axi-pcie@80000000' does not match '^pcie?@' from schema $id: http://devicetree.org/schemas/pci/xlnx,xdma-host.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/xlnx,xdma-host.example.dtb: axi-pcie@80000000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'device_type' were unexpected) from schema $id: http://devicetree.org/schemas/pci/xlnx,xdma-host.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240624104239.132159-2-thippesw@xxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
