On Mon, 13 May 2024 16:46:09 +0300 (EEST)
Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx> wrote:
> On Tue, 7 May 2024, Alex Williamson wrote:
>
> > Resizing BARs can be blocked when a device in the bridge hierarchy
> > itself consumes resources from the resized range. This scenario is
> > common with Intel Arc DG2 GPUs where the following is a typical
> > topology:
> >
> > +-[0000:5d]-+-00.0-[5e-61]----00.0-[5f-61]--+-01.0-[60]----00.0 Intel Corporation DG2 [Arc A380]
> > \-04.0-[61]----00.0 Intel Corporation DG2 Audio Controller
> >
> > Here the system BIOS has provided a large 64bit, prefetchable window:
> >
> > pci_bus 0000:5d: root bus resource [mem 0xb000000000-0xbfffffffff window]
> >
> > But only a small portion is programmed into the root port aperture:
> >
> > pci 0000:5d:00.0: bridge window [mem 0xbfe0000000-0xbff07fffff 64bit pref]
> >
> > The upstream port then provides the following aperture:
> >
> > pci 0000:5e:00.0: bridge window [mem 0xbfe0000000-0xbfefffffff 64bit pref]
> >
> > With the missing range found to be consumed by the switch port itself:
> >
> > pci 0000:5e:00.0: BAR 0 [mem 0xbff0000000-0xbff07fffff 64bit pref]
> >
> > The downstream port above the GPU provides the same aperture as upstream:
> >
> > pci 0000:5f:01.0: bridge window [mem 0xbfe0000000-0xbfefffffff 64bit pref]
> >
> > Which is entirely consumed by the GPU:
> >
> > pci 0000:60:00.0: BAR 2 [mem 0xbfe0000000-0xbfefffffff 64bit pref]
> >
> > In summary, iomem reports the following:
> >
> > b000000000-bfffffffff : PCI Bus 0000:5d
> > bfe0000000-bff07fffff : PCI Bus 0000:5e
> > bfe0000000-bfefffffff : PCI Bus 0000:5f
> > bfe0000000-bfefffffff : PCI Bus 0000:60
> > bfe0000000-bfefffffff : 0000:60:00.0
> > bff0000000-bff07fffff : 0000:5e:00.0
> >
> > The GPU at 0000:60:00.0 supports a Resizable BAR:
> >
> > Capabilities: [420 v1] Physical Resizable BAR
> > BAR 2: current size: 256MB, supported: 256MB 512MB 1GB 2GB 4GB 8GB
> >
> > However when attempting a resize we get -ENOSPC:
> >
> > pci 0000:60:00.0: BAR 2 [mem 0xbfe0000000-0xbfefffffff 64bit pref]: releasing
> > pcieport 0000:5f:01.0: bridge window [mem 0xbfe0000000-0xbfefffffff 64bit pref]: releasing
> > pcieport 0000:5e:00.0: bridge window [mem 0xbfe0000000-0xbfefffffff 64bit pref]: releasing
> > pcieport 0000:5e:00.0: bridge window [mem size 0x200000000 64bit pref]: can't assign; no space
> > pcieport 0000:5e:00.0: bridge window [mem size 0x200000000 64bit pref]: failed to assign
> > pcieport 0000:5f:01.0: bridge window [mem size 0x200000000 64bit pref]: can't assign; no space
> > pcieport 0000:5f:01.0: bridge window [mem size 0x200000000 64bit pref]: failed to assign
> > pci 0000:60:00.0: BAR 2 [mem size 0x200000000 64bit pref]: can't assign; no space
> > pci 0000:60:00.0: BAR 2 [mem size 0x200000000 64bit pref]: failed to assign
> > pcieport 0000:5d:00.0: PCI bridge to [bus 5e-61]
> > pcieport 0000:5d:00.0: bridge window [mem 0xb9000000-0xba0fffff]
> > pcieport 0000:5d:00.0: bridge window [mem 0xbfe0000000-0xbff07fffff 64bit pref]
> > pcieport 0000:5e:00.0: PCI bridge to [bus 5f-61]
> > pcieport 0000:5e:00.0: bridge window [mem 0xb9000000-0xba0fffff]
> > pcieport 0000:5e:00.0: bridge window [mem 0xbfe0000000-0xbfefffffff 64bit pref]
> > pcieport 0000:5f:01.0: PCI bridge to [bus 60]
> > pcieport 0000:5f:01.0: bridge window [mem 0xb9000000-0xb9ffffff]
> > pcieport 0000:5f:01.0: bridge window [mem 0xbfe0000000-0xbfefffffff 64bit pref]
> > pci 0000:60:00.0: BAR 2 [mem 0xbfe0000000-0xbfefffffff 64bit pref]: assigned
> >
> > In this example we need to resize all the way up to the root port
> > aperture, but we refuse to change the root port aperture while resources
> > are allocated for the upstream port BAR.
> >
> > The solution proposed here builds on the idea in commit 91fa127794ac
> > ("PCI: Expose PCIe Resizable BAR support via sysfs") where the BAR can
> > be resized while there is no driver attached. In this case, when there
> > is no driver bound to the upstream switch port we'll release resources
> > of the bridge which match the reallocation. Therefore we can achieve
> > the below successful resize operation by unbinding 0000:5e:00.0 from the
> > pcieport driver before invoking the resource2_resize interface on the
> > GPU at 0000:60:00.0.
> >
> > pci 0000:60:00.0: BAR 2 [mem 0xbfe0000000-0xbfefffffff 64bit pref]: releasing
> > pcieport 0000:5f:01.0: bridge window [mem 0xbfe0000000-0xbfefffffff 64bit pref]: releasing
> > pci 0000:5e:00.0: bridge window [mem 0xbfe0000000-0xbfefffffff 64bit pref]: releasing
> > pci 0000:5e:00.0: BAR 0 [mem 0xbff0000000-0xbff07fffff 64bit pref]: releasing
> > pcieport 0000:5d:00.0: bridge window [mem 0xbfe0000000-0xbff07fffff 64bit pref]: releasing
> > pcieport 0000:5d:00.0: bridge window [mem 0xb000000000-0xb2ffffffff 64bit pref]: assigned
> > pci 0000:5e:00.0: bridge window [mem 0xb000000000-0xb1ffffffff 64bit pref]: assigned
> > pci 0000:5e:00.0: BAR 0 [mem 0xb200000000-0xb2007fffff 64bit pref]: assigned
> > pcieport 0000:5f:01.0: bridge window [mem 0xb000000000-0xb1ffffffff 64bit pref]: assigned
> > pci 0000:60:00.0: BAR 2 [mem 0xb000000000-0xb1ffffffff 64bit pref]: assigned
> > pci 0000:5e:00.0: PCI bridge to [bus 5f-61]
> > pci 0000:5e:00.0: bridge window [mem 0xb9000000-0xba0fffff]
> > pci 0000:5e:00.0: bridge window [mem 0xb000000000-0xb1ffffffff 64bit pref]
> > pcieport 0000:5d:00.0: PCI bridge to [bus 5e-61]
> > pcieport 0000:5d:00.0: bridge window [mem 0xb9000000-0xba0fffff]
> > pcieport 0000:5d:00.0: bridge window [mem 0xb000000000-0xb2ffffffff 64bit pref]
> > pci 0000:5e:00.0: PCI bridge to [bus 5f-61]
> > pci 0000:5e:00.0: bridge window [mem 0xb9000000-0xba0fffff]
> > pci 0000:5e:00.0: bridge window [mem 0xb000000000-0xb1ffffffff 64bit pref]
> > pcieport 0000:5f:01.0: PCI bridge to [bus 60]
> > pcieport 0000:5f:01.0: bridge window [mem 0xb9000000-0xb9ffffff]
> > pcieport 0000:5f:01.0: bridge window [mem 0xb000000000-0xb1ffffffff 64bit pref]
> >
> > Signed-off-by: Alex Williamson <alex.williamson@xxxxxxxxxx>
>
> Yes. Looks another case where an already assigned resource prevents some
> operation from succeeding.
>
> > diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
> > index 909e6a7c3cc3..15fc8e4e84c9 100644
> > --- a/drivers/pci/setup-bus.c
> > +++ b/drivers/pci/setup-bus.c
> > @@ -2226,6 +2226,26 @@ void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
> > }
> > EXPORT_SYMBOL_GPL(pci_assign_unassigned_bridge_resources);
> >
> > +static void pci_release_resource_type(struct pci_dev *pdev, unsigned long type)
> > +{
> > + int i;
> > +
> > + if (!device_trylock(&pdev->dev))
> > + return;
> > +
> > + if (pdev->dev.driver)
>
> Isn't portdrv bound to bridges so how does this ends up working?
The user will need to unbind the bridge from the driver, just like
they'd need to unbind the endpoint from a driver to resize a BAR
through sysfs. I'm not sure how else to avoid races with drivers
requesting resources other than to assert that there is no driver for
the device. Do you have an alternative suggestion? Thanks,
Alex
