Re: [PATCH 07/10] PCI: Replace PCI_CONF1{,_EXT}_ADDRESS() with the new helpers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Mon, Apr 29, 2024 at 12:47 PM Ilpo Järvinen
<ilpo.jarvinen@xxxxxxxxxxxxxxx> wrote:
>
> Replace the old PCI_CONF1{,_EXT}_ADDRESS() helpers used to calculate
> PCI Configuration Space Type 1 addresses with the new
> pci_conf1{,_ext}_offset() helpers that are more generic and more widely
> available.
>
> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
> ---
>  drivers/pci/controller/pci-ftpci100.c | 6 ++----
>  drivers/pci/controller/pci-ixp4xx.c   | 5 ++---
>  drivers/pci/controller/pcie-mt7621.c  | 7 +++----
>  drivers/pci/pci.h                     | 8 --------
>  4 files changed, 7 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/pci/controller/pci-ftpci100.c b/drivers/pci/controller/pci-ftpci100.c
> index ffdeed25e961..a8d0217a0b94 100644
> --- a/drivers/pci/controller/pci-ftpci100.c
> +++ b/drivers/pci/controller/pci-ftpci100.c
> @@ -182,8 +182,7 @@ static int faraday_raw_pci_read_config(struct faraday_pci *p, int bus_number,
>                                        unsigned int fn, int config, int size,
>                                        u32 *value)
>  {
> -       writel(PCI_CONF1_ADDRESS(bus_number, PCI_SLOT(fn),
> -                                PCI_FUNC(fn), config),
> +       writel(pci_conf1_addr(bus_number, fn, config, true),
>                         p->base + FTPCI_CONFIG);
>
>         *value = readl(p->base + FTPCI_DATA);
> @@ -214,8 +213,7 @@ static int faraday_raw_pci_write_config(struct faraday_pci *p, int bus_number,
>  {
>         int ret = PCIBIOS_SUCCESSFUL;
>
> -       writel(PCI_CONF1_ADDRESS(bus_number, PCI_SLOT(fn),
> -                                PCI_FUNC(fn), config),
> +       writel(pci_conf1_addr(bus_number, fn, config, true),
>                         p->base + FTPCI_CONFIG);
>
>         switch (size) {
> diff --git a/drivers/pci/controller/pci-ixp4xx.c b/drivers/pci/controller/pci-ixp4xx.c
> index ec0125344ca1..fd52f4a3ef31 100644
> --- a/drivers/pci/controller/pci-ixp4xx.c
> +++ b/drivers/pci/controller/pci-ixp4xx.c
> @@ -192,9 +192,8 @@ static u32 ixp4xx_config_addr(u8 bus_num, u16 devfn, int where)
>                        BIT(32 - PCI_SLOT(devfn));
>         } else {
>                 /* type 1 */
> -               return (PCI_CONF1_ADDRESS(bus_num, PCI_SLOT(devfn),
> -                                         PCI_FUNC(devfn), where) &
> -                       ~PCI_CONF1_ENABLE) | PCI_CONF1_TRANSACTION;
> +               return pci_conf1_addr(bus_num, devfn, where, false) |
> +                      PCI_CONF1_TRANSACTION;
>         }
>  }
>
> diff --git a/drivers/pci/controller/pcie-mt7621.c b/drivers/pci/controller/pcie-mt7621.c
> index 79e225edb42a..2b2d9828a910 100644
> --- a/drivers/pci/controller/pcie-mt7621.c
> +++ b/drivers/pci/controller/pcie-mt7621.c
> @@ -127,8 +127,7 @@ static void __iomem *mt7621_pcie_map_bus(struct pci_bus *bus,
>                                          unsigned int devfn, int where)
>  {
>         struct mt7621_pcie *pcie = bus->sysdata;
> -       u32 address = PCI_CONF1_EXT_ADDRESS(bus->number, PCI_SLOT(devfn),
> -                                           PCI_FUNC(devfn), where);
> +       u32 address = pci_conf1_ext_addr(bus->number, devfn, where, true);
>
>         writel_relaxed(address, pcie->base + RALINK_PCI_CONFIG_ADDR);
>
> @@ -143,7 +142,7 @@ static struct pci_ops mt7621_pcie_ops = {
>
>  static u32 read_config(struct mt7621_pcie *pcie, unsigned int dev, u32 reg)
>  {
> -       u32 address = PCI_CONF1_EXT_ADDRESS(0, dev, 0, reg);
> +       u32 address = pci_conf1_ext_addr(0, PCI_DEVFN(dev, 0), reg, true);
>
>         pcie_write(pcie, address, RALINK_PCI_CONFIG_ADDR);
>         return pcie_read(pcie, RALINK_PCI_CONFIG_DATA);
> @@ -152,7 +151,7 @@ static u32 read_config(struct mt7621_pcie *pcie, unsigned int dev, u32 reg)
>  static void write_config(struct mt7621_pcie *pcie, unsigned int dev,
>                          u32 reg, u32 val)
>  {
> -       u32 address = PCI_CONF1_EXT_ADDRESS(0, dev, 0, reg);
> +       u32 address = pci_conf1_ext_addr(0, PCI_DEVFN(dev, 0), reg, true);
>
>         pcie_write(pcie, address, RALINK_PCI_CONFIG_ADDR);
>         pcie_write(pcie, val, RALINK_PCI_CONFIG_DATA);
> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> index cf0530a60105..fdf9624b0b12 100644
> --- a/drivers/pci/pci.h
> +++ b/drivers/pci/pci.h
> @@ -833,12 +833,4 @@ struct pci_devres {
>
>  struct pci_devres *find_pci_dr(struct pci_dev *pdev);
>
> -#define PCI_CONF1_ADDRESS(bus, dev, func, reg) \
> -       (PCI_CONF1_ENABLE | \
> -        pci_conf1_addr(bus, PCI_DEVFN(dev, func), reg & ~0x3U))
> -
> -#define PCI_CONF1_EXT_ADDRESS(bus, dev, func, reg) \
> -       (PCI_CONF1_ENABLE | \
> -        pci_conf1_ext_addr(bus, PCI_DEVFN(dev, func), reg & ~0x3U))
> -
>  #endif /* DRIVERS_PCI_H */
> --
> 2.39.2
>

I have tested in a GnuBee v1 board based on mt7621 and all PCI
enumeration and so on is working properly. Hence, for MT7621:

Acked-by: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
Tested-by: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>

Thanks,
    Sergio Paracuellos





[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux