----- Original Message ----- > On Wed, 2012-05-09 at 15:24 +0800, Amos Kong wrote: > > Boot up a Linux VM with 8 pci block devices which > > are the 8 functions in one pci slot. > > | # qemu-kvm ... > > | -drive file=images/u0,if=none,id=drv0,format=qcow2,cache=none \ > > | -device > > | virtio-blk-pci,drive=drv0,id=v0,multifunction=on,addr=0x03.0 \ > > | .... > > | -drive file=images/u7,if=none,id=drv7,format=qcow2,cache=none \ > > | -device > > | virtio-blk-pci,drive=drv7,id=v7,multifunction=on,addr=0x03.7 \ > > > > Check devices in guest. > > | vm)# ls /dev/vd* > > | vda vdb vdc vde vdf vdg vdh > > | vm)# lspci |grep block > > | 00:03.0 SCSI storage controller: Red Hat, Inc Virtio block device > > | ... > > | 00:03.7 SCSI storage controller: Red Hat, Inc Virtio block device > > | > > > > Func1~7 still exist in guest after hot-removing the whole slot > > through qemu monitor. > > | vm)# lspci |grep block (00:03.0 disappeared) > > | 00:03.1 SCSI storage controller: Red Hat, Inc Virtio block device > > | (rev ff) > > | ... > > | 00:03.7 SCSI storage controller: Red Hat, Inc Virtio block device > > | (rev ff) > > | vm)# ls /dev/vd* (vda disappeared) > > | vdb vdc vde vdf vdg vdh > > | vm)# mkfs /dev/vdb > > | INFO: task mkfs.ext2:1784 blocked for more than 120 seconds. > > | (task hung) > > > > > > Currently only func0 is defined in ACPI DSDT table > > of seabios, and only hot-adding func0 would cause > > a ACPI event for notification. Other funcs except > > func0 wouldn't be registered in linux pci driver. > > (we can only found func0 in slot->funcs list of > > pci driver). > > > > When VM pci driver receives an ACPI event for > > hot-removing, it will only clean functions in > > slot->funcs list, the other funcs could not be > > cleaned. > > > > This patch adds device per function in ACPI DSDT tables, > > then all funcs will be registered in slot->funcs list. > > It's coincident with microsoft's example: > > http://www.microsoft.com/china/whdc/system/pnppwr/hotadd/hotplugpci.mspx#EUH > > > > Have tested with linux/winxp/win7, hot-adding/hot-remving, > > single/multiple function devices, they are all fine(all > > added devices can be removed). > > > > This patch includes some bits mst wrote, thanks! > > --- > > old discussion: http://marc.info/?l=kvm&m=132428400917405&w=2 > > > > Signed-off-by: Amos Kong <akong@xxxxxxxxxx> > > CC: Michael S. Tsirkin <mst@xxxxxxxxxx> > > --- > > src/ssdt-pcihp.dsl | 17 > > src/ssdt-pcihp.hex | 8869 > > +++++++++++++++++++++++++++++++++++++++++++++++++++- > > 2 files changed, 8781 insertions(+), 105 deletions(-) > > > > diff --git a/src/ssdt-pcihp.dsl b/src/ssdt-pcihp.dsl > > index 4b435b8..2a3c326 100644 > > --- a/src/ssdt-pcihp.dsl > > +++ b/src/ssdt-pcihp.dsl > > @@ -17,14 +17,23 @@ DefinitionBlock ("ssdt-pcihp.aml", "SSDT", > > 0x01, "BXPC", "BXSSDTPCIHP", 0x1) > > // at runtime, if the slot is detected to not support > > hotplug. > > // Extract the offset of the address dword and the > > // _EJ0 name to allow this patching. > > -#define hotplug_slot(slot) \ > > - Device (S##slot) { \ > > +#define hotplug_func(slot, fn) \ > > + Device (S##slot##fn) { \ > > ACPI_EXTRACT_NAME_DWORD_CONST aml_adr_dword \ > > - Name (_ADR, 0x##slot##0000) \ > > I would have guessed it to be sufficient to change _ADR to > 0x##slot##ffff, does that not work? No, changing this to "0x##slot##ffff" doesn't resolve the bug. (tested) I'm trying to fix this problem in guest pci driver. http://marc.info/?l=linux-pci&m=133657729118731&w=2 Thanks, Amos > > > + Name (_ADR, 0x##slot##000##fn) \ > > ACPI_EXTRACT_METHOD_STRING aml_ej0_name \ > > Method (_EJ0, 1) { Return(PCEJ(0x##slot)) } \ > > Name (_SUN, 0x##slot) \ > > } > > +#define hotplug_slot(slot) \ > > + hotplug_func(slot, 0) \ > > + hotplug_func(slot, 1) \ > > + hotplug_func(slot, 2) \ > > + hotplug_func(slot, 3) \ > > + hotplug_func(slot, 4) \ > > + hotplug_func(slot, 5) \ > > + hotplug_func(slot, 6) \ > > + hotplug_func(slot, 7) > > > > hotplug_slot(01) > > hotplug_slot(02) > > @@ -59,7 +68,7 @@ DefinitionBlock ("ssdt-pcihp.aml", "SSDT", 0x01, > > "BXPC", "BXSSDTPCIHP", 0x1) > > hotplug_slot(1f) > > > > #define gen_pci_hotplug(slot) \ > > - If (LEqual(Arg0, 0x##slot)) { Notify(S##slot, Arg1) } > > + If (LEqual(Arg0, 0x##slot)) { Notify(S##slot##0, Arg1) > > } > > > > Method(PCNT, 2) { > > gen_pci_hotplug(01) > > > > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html