Re: [PATCH 1/5, resend] PCI: adjust quirk handler section annotations

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, May 9, 2012 at 1:43 AM, Jan Beulich <JBeulich@xxxxxxxx> wrote:
> This is in preparation to adjust modpost to check section mismatches
> on most of the .pci_fixup* sections:
>
> .pci_fixup_final is only used from .init.text, and hence can (along
> with the respective handler functions) reside in .init.*.

pci_apply_final_quirks() is currently __init, so this probably
wouldn't break anything.   But the fact that it's all __init means
that pci_fixup_final quirks are only run for devices present at boot,
and they don't apply to hot-added devices.  That seems like a bug to
me.

> Several other .pci_fixup_* sections are needed only during boot and
> suspend/resume, and can therefore be moved into .init.* if
> !CONFIG_PM.

My inclination is that all PCI fixups should work the same for
hot-added devices as for those present at boot, which would suggest
that we should always use __devinit, not __init.  If I'm missing
something, please educate me :)

Bjorn

> Handler (and eventual static data) section annotations need to/can be
> changed accordingly.
>
> Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx>
>
> ---
>  drivers/pci/quirks.c              |  103 ++++++++++++++++++--------------------
>  1 file changed, 51 insertions(+), 52 deletions(-)
>
> --- 3.4-rc6/drivers/pci/quirks.c
> +++ 3.4-rc6-pci-fixup-sections/drivers/pci/quirks.c
> @@ -37,7 +37,7 @@
>  * key system devices. For devices that need to have mmio decoding always-on,
>  * we need to set the dev->mmio_always_on bit.
>  */
> -static void __devinit quirk_mmio_always_on(struct pci_dev *dev)
> +static void quirk_mmio_always_on(struct pci_dev *dev)
>  {
>        dev->mmio_always_on = 1;
>  }
> @@ -48,7 +48,7 @@ DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID
>  * Mark this device with a broken_parity_status, to allow
>  * PCI scanning code to "skip" this now blacklisted device.
>  */
> -static void __devinit quirk_mellanox_tavor(struct pci_dev *dev)
> +static void __init quirk_mellanox_tavor(struct pci_dev *dev)
>  {
>        dev->broken_parity_status = 1;  /* This device gives false positives */
>  }
> @@ -57,7 +57,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ME
>
>  /* Deal with broken BIOS'es that neglect to enable passive release,
>    which can cause problems in combination with the 82441FX/PPro MTRRs */
> -static void quirk_passive_release(struct pci_dev *dev)
> +static void __devinit quirk_passive_release(struct pci_dev *dev)
>  {
>        struct pci_dev *d = NULL;
>        unsigned char dlc;
> @@ -83,7 +83,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_I
>     This appears to be BIOS not version dependent. So presumably there is a
>     chipset level fix */
>
> -static void __devinit quirk_isa_dma_hangs(struct pci_dev *dev)
> +static void __init quirk_isa_dma_hangs(struct pci_dev *dev)
>  {
>        if (!isa_dma_bridge_buggy) {
>                isa_dma_bridge_buggy=1;
> @@ -125,7 +125,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
>  /*
>  *     Chipsets where PCI->PCI transfers vanish or hang
>  */
> -static void __devinit quirk_nopcipci(struct pci_dev *dev)
> +static void __init quirk_nopcipci(struct pci_dev *dev)
>  {
>        if ((pci_pci_problems & PCIPCI_FAIL)==0) {
>                dev_info(&dev->dev, "Disabling direct PCI/PCI transfers\n");
> @@ -135,7 +135,7 @@ static void __devinit quirk_nopcipci(str
>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI,      PCI_DEVICE_ID_SI_5597,          quirk_nopcipci);
>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI,      PCI_DEVICE_ID_SI_496,           quirk_nopcipci);
>
> -static void __devinit quirk_nopciamd(struct pci_dev *dev)
> +static void __init quirk_nopciamd(struct pci_dev *dev)
>  {
>        u8 rev;
>        pci_read_config_byte(dev, 0x08, &rev);
> @@ -150,7 +150,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AM
>  /*
>  *     Triton requires workarounds to be used by the drivers
>  */
> -static void __devinit quirk_triton(struct pci_dev *dev)
> +static void __init quirk_triton(struct pci_dev *dev)
>  {
>        if ((pci_pci_problems&PCIPCI_TRITON)==0) {
>                dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n");
> @@ -173,7 +173,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
>  *     Updated based on further information from the site and also on
>  *     information provided by VIA
>  */
> -static void quirk_vialatency(struct pci_dev *dev)
> +static void __devinit quirk_vialatency(struct pci_dev *dev)
>  {
>        struct pci_dev *p;
>        u8 busarb;
> @@ -229,7 +229,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_V
>  /*
>  *     VIA Apollo VP3 needs ETBF on BT848/878
>  */
> -static void __devinit quirk_viaetbf(struct pci_dev *dev)
> +static void __init quirk_viaetbf(struct pci_dev *dev)
>  {
>        if ((pci_pci_problems&PCIPCI_VIAETBF)==0) {
>                dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n");
> @@ -238,7 +238,7 @@ static void __devinit quirk_viaetbf(stru
>  }
>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA,     PCI_DEVICE_ID_VIA_82C597_0,     quirk_viaetbf);
>
> -static void __devinit quirk_vsfx(struct pci_dev *dev)
> +static void __init quirk_vsfx(struct pci_dev *dev)
>  {
>        if ((pci_pci_problems&PCIPCI_VSFX)==0) {
>                dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n");
> @@ -267,7 +267,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL
>  *     Natoma has some interesting boundary conditions with Zoran stuff
>  *     at least
>  */
> -static void __devinit quirk_natoma(struct pci_dev *dev)
> +static void __init quirk_natoma(struct pci_dev *dev)
>  {
>        if ((pci_pci_problems&PCIPCI_NATOMA)==0) {
>                dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n");
> @@ -352,7 +352,7 @@ static void __devinit quirk_io_region(st
>  *     ATI Northbridge setups MCE the processor if you even
>  *     read somewhere between 0x3b0->0x3bb or read 0x3d3
>  */
> -static void __devinit quirk_ati_exploding_mce(struct pci_dev *dev)
> +static void __init quirk_ati_exploding_mce(struct pci_dev *dev)
>  {
>        dev_info(&dev->dev, "ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb\n");
>        /* Mae rhaid i ni beidio ag edrych ar y lleoliadiau I/O hyn */
> @@ -706,7 +706,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_V
>  * TI XIO2000a PCIe-PCI Bridge erroneously reports it supports fast back-to-back:
>  *     Disable fast back-to-back on the secondary bus segment
>  */
> -static void __devinit quirk_xio2000a(struct pci_dev *dev)
> +static void __init quirk_xio2000a(struct pci_dev *dev)
>  {
>        struct pci_dev *pdev;
>        u16 command;
> @@ -733,7 +733,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI
>  * TODO: When we have device-specific interrupt routers,
>  * this code will go away from quirks.
>  */
> -static void quirk_via_ioapic(struct pci_dev *dev)
> +static void __devinit quirk_via_ioapic(struct pci_dev *dev)
>  {
>        u8 tmp;
>
> @@ -757,7 +757,7 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDO
>  * Set this bit to get rid of cycle wastage.
>  * Otherwise uncritical.
>  */
> -static void quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev)
> +static void __devinit quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev)
>  {
>        u8 misc_control2;
>  #define BYPASS_APIC_DEASSERT 8
> @@ -780,7 +780,7 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDO
>  * noapic specified. For the moment we assume it's the erratum. We may be wrong
>  * of course. However the advice is demonstrably good even if so..
>  */
> -static void __devinit quirk_amd_ioapic(struct pci_dev *dev)
> +static void __init quirk_amd_ioapic(struct pci_dev *dev)
>  {
>        if (dev->revision >= 0x02) {
>                dev_warn(&dev->dev, "I/O APIC: AMD Erratum #22 may be present. In the event of instability try\n");
> @@ -939,7 +939,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_V
>  * do this even if the Linux CardBus driver is not loaded, because
>  * the Linux i82365 driver does not (and should not) handle CardBus.
>  */
> -static void quirk_cardbus_legacy(struct pci_dev *dev)
> +static void __devinit quirk_cardbus_legacy(struct pci_dev *dev)
>  {
>        pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0);
>  }
> @@ -955,7 +955,7 @@ DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(PCI
>  * To be fair to AMD, it follows the spec by default, its BIOS people
>  * who turn it off!
>  */
> -static void quirk_amd_ordering(struct pci_dev *dev)
> +static void __devinit quirk_amd_ordering(struct pci_dev *dev)
>  {
>        u32 pcic;
>        pci_read_config_dword(dev, 0x4C, &pcic);
> @@ -1005,7 +1005,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_T
>  * datasheets found at http://www.national.com/analog for info on what
>  * these bits do.  <christer@xxxxxxxxxxx>
>  */
> -static void quirk_mediagx_master(struct pci_dev *dev)
> +static void __devinit quirk_mediagx_master(struct pci_dev *dev)
>  {
>        u8 reg;
>        pci_read_config_byte(dev, 0x41, &reg);
> @@ -1023,7 +1023,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_C
>  *     the BIOS but in the odd case it is not the results are corruption
>  *     hence the presence of a Linux check
>  */
> -static void quirk_disable_pxb(struct pci_dev *pdev)
> +static void __devinit quirk_disable_pxb(struct pci_dev *pdev)
>  {
>        u16 config;
>
> @@ -1066,7 +1066,7 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDO
>  /*
>  *     Serverworks CSB5 IDE does not fully support native mode
>  */
> -static void __devinit quirk_svwks_csb5ide(struct pci_dev *pdev)
> +static void quirk_svwks_csb5ide(struct pci_dev *pdev)
>  {
>        u8 prog;
>        pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog);
> @@ -1082,7 +1082,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SE
>  /*
>  *     Intel 82801CAM ICH3-M datasheet says IDE modes must be the same
>  */
> -static void __init quirk_ide_samemode(struct pci_dev *pdev)
> +static void quirk_ide_samemode(struct pci_dev *pdev)
>  {
>        u8 prog;
>
> @@ -1101,7 +1101,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IN
>  * Some ATA devices break if put into D3
>  */
>
> -static void __devinit quirk_no_ata_d3(struct pci_dev *pdev)
> +static void quirk_no_ata_d3(struct pci_dev *pdev)
>  {
>        pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3;
>  }
> @@ -1561,7 +1561,7 @@ static void __init quirk_alder_ioapic(st
>  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,  PCI_DEVICE_ID_INTEL_EESSC,      quirk_alder_ioapic);
>  #endif
>
> -static void __devinit quirk_pcie_mch(struct pci_dev *pdev)
> +static void __init quirk_pcie_mch(struct pci_dev *pdev)
>  {
>        pci_msi_off(pdev);
>        pdev->no_msi = 1;
> @@ -1575,7 +1575,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
>  * It's possible for the MSI to get corrupted if shpc and acpi
>  * are used together on certain PXH-based systems.
>  */
> -static void __devinit quirk_pcie_pxh(struct pci_dev *dev)
> +static void quirk_pcie_pxh(struct pci_dev *dev)
>  {
>        pci_msi_off(dev);
>        dev->no_msi = 1;
> @@ -1591,7 +1591,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IN
>  * Some Intel PCI Express chipsets have trouble with downstream
>  * device power management.
>  */
> -static void quirk_intel_pcie_pm(struct pci_dev * dev)
> +static void __init quirk_intel_pcie_pm(struct pci_dev * dev)
>  {
>        pci_pm_d3_delay = 120;
>        dev->no_d1d2 = 1;
> @@ -1626,7 +1626,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
>  * that a PCI device's interrupt handler is installed on the boot interrupt
>  * line instead.
>  */
> -static void quirk_reroute_to_boot_interrupts_intel(struct pci_dev *dev)
> +static void __devinit quirk_reroute_to_boot_interrupts_intel(struct pci_dev *dev)
>  {
>        if (noioapicquirk || noioapicreroute)
>                return;
> @@ -1664,7 +1664,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_I
>  #define INTEL_6300_IOAPIC_ABAR         0x40
>  #define INTEL_6300_DISABLE_BOOT_IRQ    (1<<14)
>
> -static void quirk_disable_intel_boot_interrupt(struct pci_dev *dev)
> +static void __devinit quirk_disable_intel_boot_interrupt(struct pci_dev *dev)
>  {
>        u16 pci_config_word;
>
> @@ -1689,7 +1689,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_I
>  #define BC_HT1000_MAP_IDX              0xC00
>  #define BC_HT1000_MAP_DATA             0xC01
>
> -static void quirk_disable_broadcom_boot_interrupt(struct pci_dev *dev)
> +static void __devinit quirk_disable_broadcom_boot_interrupt(struct pci_dev *dev)
>  {
>        u32 pci_config_dword;
>        u8 irq;
> @@ -1727,7 +1727,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_S
>  #define AMD_813X_REV_B1                        0x12
>  #define AMD_813X_REV_B2                        0x13
>
> -static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev)
> +static void __devinit quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev)
>  {
>        u32 pci_config_dword;
>
> @@ -1751,7 +1751,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_A
>
>  #define AMD_8111_PCI_IRQ_ROUTING       0x56
>
> -static void quirk_disable_amd_8111_boot_interrupt(struct pci_dev *dev)
> +static void __devinit quirk_disable_amd_8111_boot_interrupt(struct pci_dev *dev)
>  {
>        u16 pci_config_word;
>
> @@ -1828,7 +1828,7 @@ static void __devinit quirk_netmos(struc
>  DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID,
>                         PCI_CLASS_COMMUNICATION_SERIAL, 8, quirk_netmos);
>
> -static void __devinit quirk_e100_interrupt(struct pci_dev *dev)
> +static void __init quirk_e100_interrupt(struct pci_dev *dev)
>  {
>        u16 command, pmcsr;
>        u8 __iomem *csr;
> @@ -1901,7 +1901,7 @@ DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR
>  * The 82575 and 82598 may experience data corruption issues when transitioning
>  * out of L0S.  To prevent this we need to disable L0S on the pci-e link
>  */
> -static void __devinit quirk_disable_aspm_l0s(struct pci_dev *dev)
> +static void __init quirk_disable_aspm_l0s(struct pci_dev *dev)
>  {
>        dev_info(&dev->dev, "Disabling L0s\n");
>        pci_disable_link_state(dev, PCIE_LINK_STATE_L0S);
> @@ -1964,7 +1964,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
>  * The IOBL_ADR gets re-written to 4k boundaries in pci_setup_bridge()
>  * in drivers/pci/setup-bus.c
>  */
> -static void __devinit quirk_p64h2_1k_io_fix_iobl(struct pci_dev *dev)
> +static void __init quirk_p64h2_1k_io_fix_iobl(struct pci_dev *dev)
>  {
>        u16 en1k, iobl_adr, iobl_adr_1k;
>        struct resource *res = dev->resource + PCI_BRIDGE_RESOURCES;
> @@ -1989,7 +1989,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
>  * Force it to be linked by setting the corresponding control bit in the
>  * config space.
>  */
> -static void quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev)
> +static void __devinit quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev)
>  {
>        uint8_t b;
>        if (pci_read_config_byte(dev, 0xf41, &b) == 0) {
> @@ -2005,7 +2005,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NV
>  DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA,  PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
>                        quirk_nvidia_ck804_pcie_aer_ext_cap);
>
> -static void __devinit quirk_via_cx700_pci_parking_caching(struct pci_dev *dev)
> +static void __init quirk_via_cx700_pci_parking_caching(struct pci_dev *dev)
>  {
>        /*
>         * Disable PCI Bus Parking and PCI Master read caching on CX700
> @@ -2068,7 +2068,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VI
>  * We believe that it is legal to read beyond the end tag and
>  * therefore the solution is to limit the read/write length.
>  */
> -static void __devinit quirk_brcm_570x_limit_vpd(struct pci_dev *dev)
> +static void __init quirk_brcm_570x_limit_vpd(struct pci_dev *dev)
>  {
>        /*
>         * Only disable the VPD capability for 5706, 5706S, 5708,
> @@ -2104,7 +2104,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BR
>                        PCI_DEVICE_ID_NX2_5709S,
>                        quirk_brcm_570x_limit_vpd);
>
> -static void __devinit quirk_brcm_5719_limit_mrrs(struct pci_dev *dev)
> +static void quirk_brcm_5719_limit_mrrs(struct pci_dev *dev)
>  {
>        u32 rev;
>
> @@ -2128,7 +2128,7 @@ DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_B
>  * the DRBs - this is where we expose device 6.
>  * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm
>  */
> -static void __devinit quirk_unhide_mch_dev6(struct pci_dev *dev)
> +static void quirk_unhide_mch_dev6(struct pci_dev *dev)
>  {
>        u8 reg;
>
> @@ -2152,7 +2152,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IN
>  * supports link speed auto negotiation, but falsely sets
>  * the link speed to 5GT/s.
>  */
> -static void __devinit quirk_tile_plx_gen1(struct pci_dev *dev)
> +static void quirk_tile_plx_gen1(struct pci_dev *dev)
>  {
>        if (tile_plx_gen1) {
>                pci_write_config_dword(dev, 0x98, 0x1);
> @@ -2183,7 +2183,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VI
>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8380_0, quirk_disable_all_msi);
>
>  /* Disable MSI on chipsets that are known to not support it */
> -static void __devinit quirk_disable_msi(struct pci_dev *dev)
> +static void __init quirk_disable_msi(struct pci_dev *dev)
>  {
>        if (dev->subordinate) {
>                dev_warn(&dev->dev, "MSI quirk detected; "
> @@ -2201,7 +2201,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AT
>  * we use the possible vendor/device IDs of the host bridge for the
>  * declared quirk, and search for the APC bridge by slot number.
>  */
> -static void __devinit quirk_amd_780_apc_msi(struct pci_dev *host_bridge)
> +static void __init quirk_amd_780_apc_msi(struct pci_dev *host_bridge)
>  {
>        struct pci_dev *apc_bridge;
>
> @@ -2241,7 +2241,7 @@ static int __devinit msi_ht_cap_enabled(
>  }
>
>  /* Check the hypertransport MSI mapping to know whether MSI is enabled or not */
> -static void __devinit quirk_msi_ht_cap(struct pci_dev *dev)
> +static void __init quirk_msi_ht_cap(struct pci_dev *dev)
>  {
>        if (dev->subordinate && !msi_ht_cap_enabled(dev)) {
>                dev_warn(&dev->dev, "MSI quirk detected; "
> @@ -2255,7 +2255,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SE
>  /* The nVidia CK804 chipset may have 2 HT MSI mappings.
>  * MSI are supported if the MSI capability set in any of these mappings.
>  */
> -static void __devinit quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev)
> +static void __init quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev)
>  {
>        struct pci_dev *pdev;
>
> @@ -2309,7 +2309,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_A
>  * for the MCP55 NIC. It is not yet determined whether the msi problem
>  * also affects other devices. As for now, turn off msi for this device.
>  */
> -static void __devinit nvenet_msi_disable(struct pci_dev *dev)
> +static void nvenet_msi_disable(struct pci_dev *dev)
>  {
>        const char *board_name = dmi_get_system_info(DMI_BOARD_NAME);
>
> @@ -2335,7 +2335,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NV
>  * we have it set correctly.
>  * Note this is an undocumented register.
>  */
> -static void __devinit nvbridge_check_legacy_irq_routing(struct pci_dev *dev)
> +static void nvbridge_check_legacy_irq_routing(struct pci_dev *dev)
>  {
>        u32 cfg;
>
> @@ -2568,11 +2568,11 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDO
>  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all);
>  DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all);
>
> -static void __devinit quirk_msi_intx_disable_bug(struct pci_dev *dev)
> +static void __init quirk_msi_intx_disable_bug(struct pci_dev *dev)
>  {
>        dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG;
>  }
> -static void __devinit quirk_msi_intx_disable_ati_bug(struct pci_dev *dev)
> +static void __init quirk_msi_intx_disable_ati_bug(struct pci_dev *dev)
>  {
>        struct pci_dev *p;
>
> @@ -2774,7 +2774,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IN
>  DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x3c28, vtd_mask_spec_errors);
>  #endif
>
> -static void __devinit fixup_ti816x_class(struct pci_dev* dev)
> +static void fixup_ti816x_class(struct pci_dev* dev)
>  {
>        /* TI 816x devices do not have class code set when in PCIe boot mode */
>        dev_info(&dev->dev, "Setting PCI class for 816x PCIe device\n");
> @@ -2896,7 +2896,7 @@ static void do_one_fixup_debug(void (*fn
>  * This resolves crashes often seen on monitor unplug.
>  */
>  #define I915_DEIER_REG 0x4400c
> -static void __devinit disable_igfx_irq(struct pci_dev *dev)
> +static void __init disable_igfx_irq(struct pci_dev *dev)
>  {
>        void __iomem *regs = pci_iomap(dev, 0, 0);
>        if (regs == NULL) {
> @@ -2951,7 +2951,7 @@ extern struct pci_fixup __start_pci_fixu
>  extern struct pci_fixup __end_pci_fixups_suspend[];
>
>
> -void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev)
> +void __ref pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev)
>  {
>        struct pci_fixup *start, *end;
>
> @@ -2997,7 +2997,6 @@ void pci_fixup_device(enum pci_fixup_pas
>        }
>        pci_do_fixups(dev, start, end);
>  }
> -EXPORT_SYMBOL(pci_fixup_device);
>
>  static int __init pci_apply_final_quirks(void)
>  {
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux