On Wed, Apr 17, 2024 at 01:26:55PM +0530, Manivannan Sadhasivam wrote: > On Tue, Apr 16, 2024 at 12:02:42PM -0500, Bjorn Helgaas wrote: > > On Mon, Apr 15, 2024 at 03:33:28PM -0400, Frank Li wrote: > > > Add PCIE_MSG_CODE_PME_TURN_OFF macros to enable a PCIe host driver to send > > > PME_Turn_Off messages. > > > > > > Signed-off-by: Frank Li <Frank.Li@xxxxxxx> > > > --- > > > drivers/pci/pci.h | 2 ++ > > > 1 file changed, 2 insertions(+) > > > > > > diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h > > > index 19b4227a8a7e8..1f6d54a5a7cfc 100644 > > > --- a/drivers/pci/pci.h > > > +++ b/drivers/pci/pci.h > > > @@ -30,6 +30,8 @@ > > > #define PCIE_MSG_TYPE_R_LOCAL 4 > > > #define PCIE_MSG_TYPE_R_GATHER 5 > > > > > > +#define PCIE_MSG_CODE_PME_TURN_OFF 0x19 > > > > This is defined in PCIe r6.0, sec 2.2.8.2, so move this below the INTx > > #defines so they're all in the order of the spec sections and add the > > I think it was me who suggested moving this up to keep it sorted in ascending > order :/ OK, the order you suggested is fine. > > spec citation to follow the same style as the surrounding #defines, > > i.e., > > > > /* Power Management Messages; PCIe r6.0, sec 2.2.8.2 */ > > #define PCIE_MSG_CODE_PME_TURN_OFF 0x19 > > > > While you're at it, tweak the [1/5] comments to be: > > > > /* Message Routing (r[2:0]); PCIe r6.0, sec 2.2.8 */ > > /* INTx Mechanism Messages; PCIe r6.0, sec 2.2.8.1 */ > > > > since the "Message Routing See: PCIe ..." comments are run together > > and need some punctuation between the text and the citation. But please do add and tweak the comments. > > With these, > > > > Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> Still fine to add this :) > > > /* INTx Mechanism Messages See: PCIe r6.0, sec 2.2.8.1 */ > > > #define PCIE_MSG_CODE_ASSERT_INTA 0x20 > > > #define PCIE_MSG_CODE_ASSERT_INTB 0x21 > > > > > > -- > > > 2.34.1 > > > > > -- > மணிவண்ணன் சதாசிவம்