On Mon, Apr 15, 2024 at 03:33:28PM -0400, Frank Li wrote: > Add PCIE_MSG_CODE_PME_TURN_OFF macros to enable a PCIe host driver to send > PME_Turn_Off messages. > > Signed-off-by: Frank Li <Frank.Li@xxxxxxx> > --- > drivers/pci/pci.h | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h > index 19b4227a8a7e8..1f6d54a5a7cfc 100644 > --- a/drivers/pci/pci.h > +++ b/drivers/pci/pci.h > @@ -30,6 +30,8 @@ > #define PCIE_MSG_TYPE_R_LOCAL 4 > #define PCIE_MSG_TYPE_R_GATHER 5 > > +#define PCIE_MSG_CODE_PME_TURN_OFF 0x19 This is defined in PCIe r6.0, sec 2.2.8.2, so move this below the INTx #defines so they're all in the order of the spec sections and add the spec citation to follow the same style as the surrounding #defines, i.e., /* Power Management Messages; PCIe r6.0, sec 2.2.8.2 */ #define PCIE_MSG_CODE_PME_TURN_OFF 0x19 While you're at it, tweak the [1/5] comments to be: /* Message Routing (r[2:0]); PCIe r6.0, sec 2.2.8 */ /* INTx Mechanism Messages; PCIe r6.0, sec 2.2.8.1 */ since the "Message Routing See: PCIe ..." comments are run together and need some punctuation between the text and the citation. With these, Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> > /* INTx Mechanism Messages See: PCIe r6.0, sec 2.2.8.1 */ > #define PCIE_MSG_CODE_ASSERT_INTA 0x20 > #define PCIE_MSG_CODE_ASSERT_INTB 0x21 > > -- > 2.34.1 >