Only managed PCI resource in the driver is the iomapped bar. However the bar
is unmapped in the same function. Therefore using the device-managed
versions just causes overhead, w/o any benefit. Once this is switched to the
non-managed versions, there's nothing left to be managed for
pcim_enable_device(). Therefore we can reduce overhead here too and switch to
the non-managed version as well. This includes removing the no longer needed
call to pcim_pin_device().
Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
---
v2:
- extended commit message
---
drivers/net/wireless/ath/ath9k/ath9k_pci_owl_loader.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ath9k_pci_owl_loader.c b/drivers/net/wireless/ath/ath9k/ath9k_pci_owl_loader.c
index a5eb43f30..bc93ca075 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k_pci_owl_loader.c
+++ b/drivers/net/wireless/ath/ath9k/ath9k_pci_owl_loader.c
@@ -65,7 +65,7 @@ static int ath9k_pci_fixup(struct pci_dev *pdev, const u16 *cal_data,
dev_info(&pdev->dev, "fixup device configuration\n");
- mem = pcim_iomap(pdev, 0, 0);
+ mem = pci_iomap(pdev, 0, 0);
if (!mem) {
dev_err(&pdev->dev, "ioremap error\n");
return -EINVAL;
@@ -103,7 +103,7 @@ static int ath9k_pci_fixup(struct pci_dev *pdev, const u16 *cal_data,
pci_write_config_word(pdev, PCI_COMMAND, cmd);
pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, bar0);
- pcim_iounmap(pdev, mem);
+ pci_iounmap(pdev, mem);
pci_disable_device(pdev);
@@ -200,11 +200,9 @@ static int owl_probe(struct pci_dev *pdev,
const char *eeprom_name;
int err = 0;
- if (pcim_enable_device(pdev))
+ if (pci_enable_device(pdev))
return -EIO;
- pcim_pin_device(pdev);
-
ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
--
2.44.0
