On Sat, Mar 30, 2024 at 01:19:13PM +0900, Damien Le Moal wrote:
> Introduce the function pci_epc_mem_map() to facilitate controller memory
> address allocation and mapping to a RC PCI address region in endpoint
> function drivers.
>
> This function first uses pci_epc_map_align() to determine the controller
> memory address alignment (offset and size) constraints. The result of
> this function is used to allocate a controller physical memory region
> using pci_epc_mem_alloc_addr() and map it to the RC PCI address
> space with pci_epc_map_addr(). Since pci_epc_map_align() may indicate
> that a mapping can be smaller than the requested size, pci_epc_mem_map()
> may only partially map the RC PCI address region specified and return
> a smaller size for the effective mapping.
>
> The counterpart of pci_epc_mem_map() to unmap and free the controller
> memory address region is pci_epc_mem_unmap().
>
> Both functions operate using struct pci_epc_map data structure which is
> extended to contain the physical and virtual addresses of the allocated
> controller memory. Endpoint function drivers can use struct pci_epc_map
> to implement read/write accesses within the mapped RC PCI address region
> using the ->virt_addr and ->size fields.
>
> This commit contains contributions from Rick Wertenbroek
> <rick.wertenbroek@xxxxxxxxx>.
>
Adding 'Co-developed-by && Signed-off-by' tags would give the due credit.
> Signed-off-by: Damien Le Moal <dlemoal@xxxxxxxxxx>
> ---
> drivers/pci/endpoint/pci-epc-core.c | 68 +++++++++++++++++++++++++++++
> include/linux/pci-epc.h | 6 +++
> 2 files changed, 74 insertions(+)
>
> diff --git a/drivers/pci/endpoint/pci-epc-core.c b/drivers/pci/endpoint/pci-epc-core.c
> index 37758ca91d7f..0095b54bdf9e 100644
> --- a/drivers/pci/endpoint/pci-epc-core.c
> +++ b/drivers/pci/endpoint/pci-epc-core.c
> @@ -530,6 +530,74 @@ int pci_epc_map_addr(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
> }
> EXPORT_SYMBOL_GPL(pci_epc_map_addr);
>
> +/**
> + * pci_epc_mem_map() - allocate and map CPU address to PCI address
How about, 'pci_epc_alloc_map()'? I think the 'mem' prefix was added to the
existing APIs since the function definitions are in pci-epc-mem driver, but
not needed here.
> + * @epc: the EPC device on which the CPU address is to be allocated and mapped
> + * @func_no: the physical endpoint function number in the EPC device
> + * @vfunc_no: the virtual endpoint function number in the physical function
> + * @pci_addr: PCI address to which the CPU address should be mapped
> + * @size: the number of bytes to map starting from @pci_addr
> + * @map: where to return the mapping information
> + *
> + * Allocate a controller physical address region and map it to a RC PCI address
"Allocate an EPC address space region..."
> + * region, taking into account the controller physical address mapping
> + * constraints (if any). Returns the effective size of the mapping, which may
Return value should be specified separately for Kdoc.
> + * be less than @size, or a negative error code in case of error.
> + */
> +ssize_t pci_epc_mem_map(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
> + u64 pci_addr, size_t size, struct pci_epc_map *map)
> +{
> + int ret;
> +
> + ret = pci_epc_map_align(epc, func_no, vfunc_no, pci_addr, size, map);
> + if (ret)
> + return ret;
> +
> + map->virt_base = pci_epc_mem_alloc_addr(epc, &map->phys_base,
> + map->map_size);
It'd be nice to move pci_epc_map_align() inside the existing
pci_epc_mem_alloc_addr() API to make sure that the allocated memory follows the
constraints of the EPC.
Would that make sense?
- Mani
> + if (!map->virt_base)
> + return -ENOMEM;
> +
> + map->phys_addr = map->phys_base + map->map_ofst;
> + map->virt_addr = map->virt_base + map->map_ofst;
> +
> + ret = pci_epc_map_addr(epc, func_no, vfunc_no, map->phys_base,
> + map->map_pci_addr, map->map_size);
> + if (ret) {
> + pci_epc_mem_free_addr(epc, map->phys_base, map->virt_base,
> + map->map_size);
> + return ret;
> + }
> +
> + return map->pci_size;
> +}
> +EXPORT_SYMBOL_GPL(pci_epc_mem_map);
> +
> +/**
> + * pci_epc_mem_unmap() - unmap from PCI address and free a CPU address region
> + * @epc: the EPC device on which the CPU address is allocated and mapped
> + * @func_no: the physical endpoint function number in the EPC device
> + * @vfunc_no: the virtual endpoint function number in the physical function
> + * @map: the mapping information
> + *
> + * Allocate and map local CPU address to a PCI address, accounting for the
> + * controller local CPU address alignment constraints.
> + */
> +void pci_epc_mem_unmap(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
> + struct pci_epc_map *map)
> +{
> + if (!pci_epc_function_is_valid(epc, func_no, vfunc_no))
> + return;
> +
> + if (!map || !map->pci_size)
> + return;
> +
> + pci_epc_unmap_addr(epc, func_no, vfunc_no, map->phys_base);
> + pci_epc_mem_free_addr(epc, map->phys_base, map->virt_base,
> + map->map_size);
> +}
> +EXPORT_SYMBOL_GPL(pci_epc_mem_unmap);
> +
> /**
> * pci_epc_clear_bar() - reset the BAR
> * @epc: the EPC device for which the BAR has to be cleared
> diff --git a/include/linux/pci-epc.h b/include/linux/pci-epc.h
> index 8cfb4aaf2628..86397a500b54 100644
> --- a/include/linux/pci-epc.h
> +++ b/include/linux/pci-epc.h
> @@ -304,4 +304,10 @@ void __iomem *pci_epc_mem_alloc_addr(struct pci_epc *epc,
> phys_addr_t *phys_addr, size_t size);
> void pci_epc_mem_free_addr(struct pci_epc *epc, phys_addr_t phys_addr,
> void __iomem *virt_addr, size_t size);
> +
> +ssize_t pci_epc_mem_map(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
> + u64 pci_addr, size_t size, struct pci_epc_map *map);
> +void pci_epc_mem_unmap(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
> + struct pci_epc_map *map);
> +
> #endif /* __LINUX_PCI_EPC_H */
> --
> 2.44.0
>
--
மணிவண்ணன் சதாசிவம்
