Re: [PATCH v3 6/7] PCI: dwc: rcar-gen4: Add support for r8a779g0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Shimoda-san,

On Mon, Apr 1, 2024 at 4:40 AM Yoshihiro Shimoda
<yoshihiro.shimoda.uh@xxxxxxxxxxx> wrote:
> This driver previously supported r8a779f0 (R-Car S4-8). Add support
> for r8a779g0 (R-Car V4H).
>
> To support r8a779g0, it requires specific firmware.
>
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>

Thanks for your patch!

> --- a/drivers/pci/controller/dwc/pcie-rcar-gen4.c
> +++ b/drivers/pci/controller/dwc/pcie-rcar-gen4.c

> +static int rcar_gen4_pcie_update_phy_firmware(struct rcar_gen4_pcie *rcar)
> +{
> +       const u32 check_addr[] = { 0x00101018, 0x00101118, 0x00101021, 0x00101121};
> +       struct dw_pcie *dw = &rcar->dw;
> +       const struct firmware *fw;
> +       unsigned int i, timeout;
> +       u32 data;
> +       int ret;
> +
> +       ret = request_firmware(&fw, RCAR_GEN4_PCIE_FIRMWARE_NAME, dw->dev);
> +       if (ret) {
> +               dev_err(dw->dev, "%s: Requesting firmware failed\n", __func__);
> +               return ret;
> +       }
> +
> +       for (i = 0; i < (fw->size / 2); i++) {
> +               data = fw->data[i * 2] | fw->data[(i * 2) + 1] << 8;
> +               timeout = 100;
> +retry_data:
> +               dw_pcie_writel_dbi(dw, PRTLGC89, RCAR_GEN4_PCIE_FIRMWARE_BASE_ADDR + i);
> +               dw_pcie_writel_dbi(dw, PRTLGC90, data);
> +               if (rcar_gen4_pcie_reg_check_bit(rcar, PRTLGC89, BIT(30)) < 0) {

If you would invert the logic here, you could "break" here, ...

> +                       if (!(--timeout)) {
> +                               ret = -ETIMEDOUT;
> +                               goto exit;
> +                       }
> +                       usleep_range(100, 200);
> +                       goto retry_data;

... and convert "retry_data: ... goto retry_data" into "do { ... } while (1)",
avoiding the goto.

> +               }
> +       }
> +
> +       rcar_gen4_pcie_phy_reg_update_bits(rcar, RCAR_GEN4_PCIE_PHY_0f8, BIT(17), BIT(17));
> +
> +       for (i = 0; i < ARRAY_SIZE(check_addr); i++) {
> +               timeout = 100;
> +retry_check:
> +               dw_pcie_writel_dbi(dw, PRTLGC89, check_addr[i]);
> +               ret = rcar_gen4_pcie_reg_check_bit(rcar, PRTLGC89, BIT(30));
> +               ret |= rcar_gen4_pcie_reg_check_bit(rcar, PRTLGC90, BIT(0));
> +               if (ret < 0) {
> +                       if (!(--timeout)) {
> +                               ret = -ETIMEDOUT;
> +                               goto exit;
> +                       }
> +                       usleep_range(100, 200);
> +                       goto retry_check;

Likewise.

> +               }
> +       }
> +
> +       ret = 0;
> +exit:
> +       release_firmware(fw);
> +
> +       return ret;
> +}

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds





[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux