On 05/05/12 05:38, Yinghai Lu wrote:
On Fri, May 4, 2012 at 12:37 PM, Yinghai Lu<yinghai@xxxxxxxxxx> wrote:
On Fri, May 4, 2012 at 11:48 AM, Greg KH<gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
Ok, it looks like these are the devices that we are missing while
"hotplugging":
37:00.0 PCI bridge: Intel Corporation Device 1513
38:00.0 PCI bridge: Intel Corporation Device 1513
38:01.0 PCI bridge: Intel Corporation Device 1513
38:02.0 PCI bridge: Intel Corporation Device 1513
38:03.0 PCI bridge: Intel Corporation Device 1513
38:04.0 PCI bridge: Intel Corporation Device 1513
38:05.0 PCI bridge: Intel Corporation Device 1513
39:00.0 PCI bridge: Pericom Semiconductor Device 400c (rev 02)
3a:03.0 PCI bridge: Pericom Semiconductor Device 400c (rev 02)
3b:00.0 USB controller: Pericom Semiconductor Device 400e (rev 01)
3b:00.1 USB controller: Pericom Semiconductor Device 400e (rev 01)
3b:00.2 USB controller: Pericom Semiconductor Device 400f (rev 01)
3c:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM57761 Gigabit Ethernet PCIe (rev 10)
3d:00.0 FireWire (IEEE 1394): nee Agere Systems nee Lucent
Microelectronics FW643 PCI Express 1394b Controller (PHY/Link) (rev 08)
Which is good, I was worried that there was a video controller out there
on the end of the thunderbolt link.
So, the problem really is two here:
- your video card doesn't detect the new display
- your pci devices do not show up
The first one probably needs to be reported to the Intel video driver
people, they can help you out the best.
no it's definitely not the first one. As you saw, there'sa whole bunch
of other devices (3 USB, firewire, network) that do not show up either.
The new info from Yinghai (thanks Yinghai) explains why hotpluging with
pciehp did not work/detect the PCIE hotplug and did not result in *any*
kernel messages.
So the whole thing I guess boils down to making acpiphp work. And why it
outputs the "no such device" error message and does not load:
I tried with debug=1 and got a bit more info in the log files:
[root@poliahu frigaut]# lsmod | grep -e acpi -e pci
acpi_cpufreq 5941 0
mperf 1275 1 acpi_cpufreq
processor 26144 1 acpi_cpufreq
[root@poliahu frigaut]# modprobe acpiphp debug=1
ERROR: could not insert 'acpiphp': No such device
at this point this message showed up in everything.log:
May 5 14:09:55 localhost kernel: [28329.700022] pci_hotplug: PCI Hot
Plug PCI Core version: 0.5
May 5 14:09:55 localhost kernel: [28329.702041] acpiphp: ACPI Hot Plug
PCI Controller Driver version: 0.5
May 5 14:09:55 localhost kernel: [28329.702484] acpiphp_glue: found
PCI-to-PCI bridge at PCI 0000:04:00.0
May 5 14:09:55 localhost kernel: [28329.702715] acpiphp_glue: Bus
0000:05 has 0 slots
May 5 14:09:55 localhost kernel: [28329.702720] acpiphp_glue: Total 0 slots
then:
[root@poliahu frigaut]# lsmod | grep -e acpi -e pci
pci_hotplug 25324 0
acpi_cpufreq 5941 0
mperf 1275 1 acpi_cpufreq
processor 26144 1 acpi_cpufreq
[root@poliahu frigaut]#
shows that acpiphp was indeed not loaded (I assume the error occurs
after it has written out the above messages in the log file), but
pci_hotplug was as a dep of acpiphp I assume (thus, correct behavior).
So we're back to the issue of the acpiphp load error.
Greg, I see you're one of the authors of acpiphp:
#define DRIVER_VERSION "0.5"
#define DRIVER_AUTHOR "Greg Kroah-Hartman <gregkh@xxxxxxxxxx>,
Takayoshi Kochi <t-kochi@xxxxxxxxxxxxx>, Matthew Wilcox <willy@xxxxxx>"
#define DRIVER_DESC "ACPI Hot Plug PCI Controller Driver"
but that might have been a while back?
Cheers, and thanks,
Francois
The second one means that something is up with the pci hotplug
controller. I've cced the linux-pci list, the people there should be
able to help out better than I, as I no longer have any PCI hotplug
hardware to work with anymore.
those devices are under 04:04.0, but that does not have slot cap
enabled by BIOS. So pciehp is going to to help.
should be: pciehp is not going to help.
so acpiphp are involved?
Yinghai
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
