FAILED: Patch "PCI/AER: Block runtime suspend when handling errors" failed to apply to 4.19-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.

Thanks,
Sasha

------------------ original commit in Linus's tree ------------------

>From 002bf2fbc00e5c4b95fb167287e2ae7d1973281e Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <stanislaw.gruszka@xxxxxxxxxxxxxxx>
Date: Mon, 12 Feb 2024 13:01:35 +0100
Subject: [PATCH] PCI/AER: Block runtime suspend when handling errors

PM runtime can be done simultaneously with AER error handling.  Avoid that
by using pm_runtime_get_sync() before and pm_runtime_put() after reset in
pcie_do_recovery() for all recovering devices.

pm_runtime_get_sync() will increase dev->power.usage_count counter to
prevent any possible future request to runtime suspend a device.  It will
also resume a device, if it was previously in D3hot state.

I tested with igc device by doing simultaneous aer_inject and rpm
suspend/resume via /sys/bus/pci/devices/PCI_ID/power/control and can
reproduce:

  igc 0000:02:00.0: not ready 65535ms after bus reset; giving up
  pcieport 0000:00:1c.2: AER: Root Port link has been reset (-25)
  pcieport 0000:00:1c.2: AER: subordinate device reset failed
  pcieport 0000:00:1c.2: AER: device recovery failed
  igc 0000:02:00.0: Unable to change power state from D3hot to D0, device inaccessible

The problem disappears when this patch is applied.

Link: https://lore.kernel.org/r/20240212120135.146068-1-stanislaw.gruszka@xxxxxxxxxxxxxxx
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@xxxxxxxxxxxxxxx>
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@xxxxxxxxxxxxxxx>
Acked-by: Rafael J. Wysocki <rafael@xxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx>
---
 drivers/pci/pcie/err.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
index 59c90d04a609a..705893b5f7b09 100644
--- a/drivers/pci/pcie/err.c
+++ b/drivers/pci/pcie/err.c
@@ -13,6 +13,7 @@
 #define dev_fmt(fmt) "AER: " fmt
 
 #include <linux/pci.h>
+#include <linux/pm_runtime.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -85,6 +86,18 @@ static int report_error_detected(struct pci_dev *dev,
 	return 0;
 }
 
+static int pci_pm_runtime_get_sync(struct pci_dev *pdev, void *data)
+{
+	pm_runtime_get_sync(&pdev->dev);
+	return 0;
+}
+
+static int pci_pm_runtime_put(struct pci_dev *pdev, void *data)
+{
+	pm_runtime_put(&pdev->dev);
+	return 0;
+}
+
 static int report_frozen_detected(struct pci_dev *dev, void *data)
 {
 	return report_error_detected(dev, pci_channel_io_frozen, data);
@@ -207,6 +220,8 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
 	else
 		bridge = pci_upstream_bridge(dev);
 
+	pci_walk_bridge(bridge, pci_pm_runtime_get_sync, NULL);
+
 	pci_dbg(bridge, "broadcast error_detected message\n");
 	if (state == pci_channel_io_frozen) {
 		pci_walk_bridge(bridge, report_frozen_detected, &status);
@@ -251,10 +266,15 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
 		pcie_clear_device_status(dev);
 		pci_aer_clear_nonfatal_status(dev);
 	}
+
+	pci_walk_bridge(bridge, pci_pm_runtime_put, NULL);
+
 	pci_info(bridge, "device recovery successful\n");
 	return status;
 
 failed:
+	pci_walk_bridge(bridge, pci_pm_runtime_put, NULL);
+
 	pci_uevent_ers(bridge, PCI_ERS_RESULT_DISCONNECT);
 
 	/* TODO: Should kernel panic here? */
-- 
2.43.0








[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux