In the process of converting .scan_bus() callbacks to .add_bus(), the
ks_pcie_v3_65_scan_bus() function was changed to ks_pcie_v3_65_add_bus().
The .scan_bus() method belonged to ks_pcie_host_ops which was specific
to controller version 3.65a, while the .add_bus() method had been added
to ks_pcie_ops which is shared between the controller versions 3.65a and
4.90a. Neither the older ks_pcie_v3_65_scan_bus() method, nor the newer
ks_pcie_v3_65_add_bus() method is applicable to the controller version
4.90a which is present in AM654x SoCs.
Thus, as a fix, move the contents of "ks_pcie_v3_65_add_bus()" to the
.msi_init callback "ks_pcie_msi_host_init()" which is specific to the
3.65a controller. Also, move the definitions of ks_pcie_set_dbi_mode()
and ks_pcie_clear_dbi_mode() above ks_pcie_msi_host_init() in order to
avoid forward declaration.
Fixes: 6ab15b5e7057 ("PCI: dwc: keystone: Convert .scan_bus() callback to use add_bus")
Suggested-by: Serge Semin <fancer.lancer@xxxxxxxxx>
Suggested-by: Bjorn Helgaas <helgaas@xxxxxxxxxx>
Suggested-by: Niklas Cassel <cassel@xxxxxxxxxx>
Reviewed-by: Niklas Cassel <cassel@xxxxxxxxxx>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@xxxxxx>
---
Hello,
This patch is based on linux-next tagged next-20240326.
v5:
https://lore.kernel.org/r/20240326111905.2369778-1-s-vadapalli@xxxxxx/
Changes since v5:
- Fixed indentation of comment as pointed out by:
Niklas Cassel <cassel@xxxxxxxxxx>
at:
https://lore.kernel.org/r/ZgLUCqh12RMApzyr@x1-carbon/
- Collected Reviewed-by tag from:
Niklas Cassel <cassel@xxxxxxxxxx>
Regards,
Siddharth.
drivers/pci/controller/dwc/pci-keystone.c | 136 ++++++++++------------
1 file changed, 60 insertions(+), 76 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 844de4418724..6cb3a4713009 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -245,8 +245,68 @@ static struct irq_chip ks_pcie_msi_irq_chip = {
.irq_unmask = ks_pcie_msi_unmask,
};
+/**
+ * ks_pcie_set_dbi_mode() - Set DBI mode to access overlaid BAR mask registers
+ * @ks_pcie: A pointer to the keystone_pcie structure which holds the KeyStone
+ * PCIe host controller driver information.
+ *
+ * Since modification of dbi_cs2 involves different clock domain, read the
+ * status back to ensure the transition is complete.
+ */
+static void ks_pcie_set_dbi_mode(struct keystone_pcie *ks_pcie)
+{
+ u32 val;
+
+ val = ks_pcie_app_readl(ks_pcie, CMD_STATUS);
+ val |= DBI_CS2;
+ ks_pcie_app_writel(ks_pcie, CMD_STATUS, val);
+
+ do {
+ val = ks_pcie_app_readl(ks_pcie, CMD_STATUS);
+ } while (!(val & DBI_CS2));
+}
+
+/**
+ * ks_pcie_clear_dbi_mode() - Disable DBI mode
+ * @ks_pcie: A pointer to the keystone_pcie structure which holds the KeyStone
+ * PCIe host controller driver information.
+ *
+ * Since modification of dbi_cs2 involves different clock domain, read the
+ * status back to ensure the transition is complete.
+ */
+static void ks_pcie_clear_dbi_mode(struct keystone_pcie *ks_pcie)
+{
+ u32 val;
+
+ val = ks_pcie_app_readl(ks_pcie, CMD_STATUS);
+ val &= ~DBI_CS2;
+ ks_pcie_app_writel(ks_pcie, CMD_STATUS, val);
+
+ do {
+ val = ks_pcie_app_readl(ks_pcie, CMD_STATUS);
+ } while (val & DBI_CS2);
+}
+
static int ks_pcie_msi_host_init(struct dw_pcie_rp *pp)
{
+ struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+ struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
+
+ /* Configure and set up BAR0 */
+ ks_pcie_set_dbi_mode(ks_pcie);
+
+ /* Enable BAR0 */
+ dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 1);
+ dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, SZ_4K - 1);
+
+ ks_pcie_clear_dbi_mode(ks_pcie);
+
+ /*
+ * For BAR0, just setting bus address for inbound writes (MSI) should
+ * be sufficient. Use physical address to avoid any conflicts.
+ */
+ dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, ks_pcie->app.start);
+
pp->msi_irq_chip = &ks_pcie_msi_irq_chip;
return dw_pcie_allocate_domains(pp);
}
@@ -340,48 +400,6 @@ static const struct irq_domain_ops ks_pcie_intx_irq_domain_ops = {
.xlate = irq_domain_xlate_onetwocell,
};
-/**
- * ks_pcie_set_dbi_mode() - Set DBI mode to access overlaid BAR mask registers
- * @ks_pcie: A pointer to the keystone_pcie structure which holds the KeyStone
- * PCIe host controller driver information.
- *
- * Since modification of dbi_cs2 involves different clock domain, read the
- * status back to ensure the transition is complete.
- */
-static void ks_pcie_set_dbi_mode(struct keystone_pcie *ks_pcie)
-{
- u32 val;
-
- val = ks_pcie_app_readl(ks_pcie, CMD_STATUS);
- val |= DBI_CS2;
- ks_pcie_app_writel(ks_pcie, CMD_STATUS, val);
-
- do {
- val = ks_pcie_app_readl(ks_pcie, CMD_STATUS);
- } while (!(val & DBI_CS2));
-}
-
-/**
- * ks_pcie_clear_dbi_mode() - Disable DBI mode
- * @ks_pcie: A pointer to the keystone_pcie structure which holds the KeyStone
- * PCIe host controller driver information.
- *
- * Since modification of dbi_cs2 involves different clock domain, read the
- * status back to ensure the transition is complete.
- */
-static void ks_pcie_clear_dbi_mode(struct keystone_pcie *ks_pcie)
-{
- u32 val;
-
- val = ks_pcie_app_readl(ks_pcie, CMD_STATUS);
- val &= ~DBI_CS2;
- ks_pcie_app_writel(ks_pcie, CMD_STATUS, val);
-
- do {
- val = ks_pcie_app_readl(ks_pcie, CMD_STATUS);
- } while (val & DBI_CS2);
-}
-
static void ks_pcie_setup_rc_app_regs(struct keystone_pcie *ks_pcie)
{
u32 val;
@@ -445,44 +463,10 @@ static struct pci_ops ks_child_pcie_ops = {
.write = pci_generic_config_write,
};
-/**
- * ks_pcie_v3_65_add_bus() - keystone add_bus post initialization
- * @bus: A pointer to the PCI bus structure.
- *
- * This sets BAR0 to enable inbound access for MSI_IRQ register
- */
-static int ks_pcie_v3_65_add_bus(struct pci_bus *bus)
-{
- struct dw_pcie_rp *pp = bus->sysdata;
- struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
- struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
-
- if (!pci_is_root_bus(bus))
- return 0;
-
- /* Configure and set up BAR0 */
- ks_pcie_set_dbi_mode(ks_pcie);
-
- /* Enable BAR0 */
- dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 1);
- dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, SZ_4K - 1);
-
- ks_pcie_clear_dbi_mode(ks_pcie);
-
- /*
- * For BAR0, just setting bus address for inbound writes (MSI) should
- * be sufficient. Use physical address to avoid any conflicts.
- */
- dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, ks_pcie->app.start);
-
- return 0;
-}
-
static struct pci_ops ks_pcie_ops = {
.map_bus = dw_pcie_own_conf_map_bus,
.read = pci_generic_config_read,
.write = pci_generic_config_write,
- .add_bus = ks_pcie_v3_65_add_bus,
};
/**
--
2.40.1
