[PATCH v6 1/3] dt-bindings: pci: layerscape-pci: Convert to yaml format

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Split layerscape-pci.txt into two yaml files: fsl,layerscape-pcie-ep.yaml
and fsl,layerscape-pcie.yaml.
yaml files contain the same content as the original txt file.

Do below changes to pass dtb_binding check:
- Remove dma-coherent and fsl,pcie-scfg because not every SOC need it.
- Set unevaluatedProperties to true in fsl,layerscape-pcie.yaml.

Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
 .../bindings/pci/fsl,layerscape-pcie-ep.yaml  |  87 +++++++++++++
 .../bindings/pci/fsl,layerscape-pcie.yaml     | 121 ++++++++++++++++++
 .../bindings/pci/layerscape-pci.txt           |  79 ------------
 3 files changed, 208 insertions(+), 79 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pci/fsl,layerscape-pcie-ep.yaml
 create mode 100644 Documentation/devicetree/bindings/pci/fsl,layerscape-pcie.yaml
 delete mode 100644 Documentation/devicetree/bindings/pci/layerscape-pci.txt

diff --git a/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie-ep.yaml
new file mode 100644
index 0000000000000..cf517e4e46a33
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie-ep.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape PCIe Root Complex(RC) controller
+
+maintainers:
+  - Frank Li <Frank.Li@xxxxxxx>
+
+description:
+  This PCIe RC controller is based on the Synopsys DesignWare PCIe IP
+  and thus inherits all the common properties defined in snps,dw-pcie.yaml.
+
+  This controller derives its clocks from the Reset Configuration Word (RCW)
+  which is used to describe the PLL settings at the time of chip-reset.
+
+  Also as per the available Reference Manuals, there is no specific 'version'
+  register available in the Freescale PCIe controller register set,
+  which can allow determining the underlying DesignWare PCIe controller version
+  information.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,ls1028a-pcie-ep
+          - fsl,ls2046a-pcie-ep
+          - fsl,ls2088a-pcie-ep
+          - fsl,ls1046a-pcie-ep
+          - fsl,ls1043a-pcie-ep
+          - fsl,ls1012a-pcie-ep
+          - fsl,lx2160ar2-pcie-ep
+      - const: fsl,ls-pcie-ep
+
+  reg:
+    description: base addresses and lengths of the PCIe controller register blocks.
+
+  interrupts:
+    description: A list of interrupt outputs of the controller. Must contain an
+      entry for each entry in the interrupt-names property.
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 3
+    description: It could include the following entries.
+    items:
+      oneOf:
+        - description:
+            Used for interrupt line which reports AER events when
+            non MSI/MSI-X/INTx mode is used.
+          const: aer
+        - description:
+            Used for interrupt line which reports PME events when
+            non MSI/MSI-X/INTx mode is used.
+          const: pme
+        - description:
+            Used for SoCs(like ls2080a, lx2160a, ls2080a, ls2088a, ls1088a)
+            which has a single interrupt line for miscellaneous controller
+            events(could include AER and PME events).
+          const: intr
+
+  fsl,pcie-scfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Must include two entries.
+      The first entry must be a link to the SCFG device node
+      The second entry is the physical PCIe controller index starting from '0'.
+      This is used to get SCFG PEXN registers
+
+  dma-coherent:
+    description: Indicates that the hardware IP block can ensure the coherency
+      of the data transferred from/to the IP block. This can avoid the software
+      cache flush/invalid actions, and improve the performance significantly
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: If the PEX_LUT and PF register block is in big-endian, specify
+      this property.
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupt-names
+
diff --git a/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie.yaml
new file mode 100644
index 0000000000000..3f2d058701d22
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape PCIe Root Complex(RC) controller
+
+maintainers:
+  - Frank Li <Frank.Li@xxxxxxx>
+
+description:
+  This PCIe RC controller is based on the Synopsys DesignWare PCIe IP
+  and thus inherits all the common properties defined in snps,dw-pcie.yaml.
+
+  This controller derives its clocks from the Reset Configuration Word (RCW)
+  which is used to describe the PLL settings at the time of chip-reset.
+
+  Also as per the available Reference Manuals, there is no specific 'version'
+  register available in the Freescale PCIe controller register set,
+  which can allow determining the underlying DesignWare PCIe controller version
+  information.
+
+properties:
+  compatible:
+    enum:
+      - fsl,ls1021a-pcie
+      - fsl,ls2080a-pcie
+      - fsl,ls2085a-pcie
+      - fsl,ls2088a-pcie
+      - fsl,ls1088a-pcie
+      - fsl,ls1046a-pcie
+      - fsl,ls1043a-pcie
+      - fsl,ls1012a-pcie
+      - fsl,ls1028a-pcie
+      - fsl,lx2160a-pcie
+
+  reg:
+    description: base addresses and lengths of the PCIe controller register blocks.
+
+  interrupts:
+    description: A list of interrupt outputs of the controller. Must contain an
+      entry for each entry in the interrupt-names property.
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 3
+    description: It could include the following entries.
+    items:
+      oneOf:
+        - description:
+            Used for interrupt line which reports AER events when
+            non MSI/MSI-X/INTx mode is used.
+          const: aer
+        - description:
+            Used for interrupt line which reports PME events when
+            non MSI/MSI-X/INTx mode is used.
+          const: pme
+        - description:
+            Used for SoCs(like ls2080a, lx2160a, ls2080a, ls2088a, ls1088a)
+            which has a single interrupt line for miscellaneous controller
+            events(could include AER and PME events).
+          const: intr
+
+  fsl,pcie-scfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Must include two entries.
+      The first entry must be a link to the SCFG device node
+      The second entry is the physical PCIe controller index starting from '0'.
+      This is used to get SCFG PEXN registers
+
+  dma-coherent:
+    description: Indicates that the hardware IP block can ensure the coherency
+      of the data transferred from/to the IP block. This can avoid the software
+      cache flush/invalid actions, and improve the performance significantly
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: If the PEX_LUT and PF register block is in big-endian, specify
+      this property.
+
+unevaluatedProperties: true
+
+required:
+  - compatible
+  - reg
+  - interrupt-names
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      pcie@3400000 {
+        compatible = "fsl,ls1088a-pcie";
+        reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+            <0x20 0x00000000 0x0 0x00002000>; /* configuration space */
+        reg-names = "regs", "config";
+        interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+        interrupt-names = "aer";
+        #address-cells = <3>;
+        #size-cells = <2>;
+        dma-coherent;
+        device_type = "pci";
+        bus-range = <0x0 0xff>;
+        ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000   /* downstream I/O */
+                 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+        msi-parent = <&its>;
+        #interrupt-cells = <1>;
+        interrupt-map-mask = <0 0 0 7>;
+        interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>,
+                        <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>,
+                        <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
+                        <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>;
+        iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
deleted file mode 100644
index ee8a4791a78b4..0000000000000
--- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-Freescale Layerscape PCIe controller
-
-This PCIe host controller is based on the Synopsys DesignWare PCIe IP
-and thus inherits all the common properties defined in snps,dw-pcie.yaml.
-
-This controller derives its clocks from the Reset Configuration Word (RCW)
-which is used to describe the PLL settings at the time of chip-reset.
-
-Also as per the available Reference Manuals, there is no specific 'version'
-register available in the Freescale PCIe controller register set,
-which can allow determining the underlying DesignWare PCIe controller version
-information.
-
-Required properties:
-- compatible: should contain the platform identifier such as:
-  RC mode:
-        "fsl,ls1021a-pcie"
-        "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"
-        "fsl,ls2088a-pcie"
-        "fsl,ls1088a-pcie"
-        "fsl,ls1046a-pcie"
-        "fsl,ls1043a-pcie"
-        "fsl,ls1012a-pcie"
-        "fsl,ls1028a-pcie"
-  EP mode:
-	"fsl,ls1028a-pcie-ep", "fsl,ls-pcie-ep"
-	"fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
-	"fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"
-	"fsl,ls2088a-pcie-ep", "fsl,ls-pcie-ep"
-	"fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep"
-- reg: base addresses and lengths of the PCIe controller register blocks.
-- interrupts: A list of interrupt outputs of the controller. Must contain an
-  entry for each entry in the interrupt-names property.
-- interrupt-names: It could include the following entries:
-  "aer": Used for interrupt line which reports AER events when
-	 non MSI/MSI-X/INTx mode is used
-  "pme": Used for interrupt line which reports PME events when
-	 non MSI/MSI-X/INTx mode is used
-  "intr": Used for SoCs(like ls2080a, lx2160a, ls2080a, ls2088a, ls1088a)
-	  which has a single interrupt line for miscellaneous controller
-	  events(could include AER and PME events).
-- fsl,pcie-scfg: Must include two entries.
-  The first entry must be a link to the SCFG device node
-  The second entry is the physical PCIe controller index starting from '0'.
-  This is used to get SCFG PEXN registers
-- dma-coherent: Indicates that the hardware IP block can ensure the coherency
-  of the data transferred from/to the IP block. This can avoid the software
-  cache flush/invalid actions, and improve the performance significantly.
-
-Optional properties:
-- big-endian: If the PEX_LUT and PF register block is in big-endian, specify
-  this property.
-
-Example:
-
-        pcie@3400000 {
-                compatible = "fsl,ls1088a-pcie";
-                reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
-                      <0x20 0x00000000 0x0 0x00002000>; /* configuration space */
-                reg-names = "regs", "config";
-                interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
-                interrupt-names = "aer";
-                #address-cells = <3>;
-                #size-cells = <2>;
-                device_type = "pci";
-                dma-coherent;
-                num-viewport = <256>;
-                bus-range = <0x0 0xff>;
-                ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000   /* downstream I/O */
-                          0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-                msi-parent = <&its>;
-                #interrupt-cells = <1>;
-                interrupt-map-mask = <0 0 0 7>;
-                interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>,
-                                <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>,
-                                <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
-                                <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>;
-                iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
-        };
-- 
2.34.1





[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux