> When inserting an SD7.0 card to Realtek card reader, the card reader > unplugs itself and morph into a NVMe device. The slot Link down on hot > unplugged can cause the following error: > > pcieport 0000:00:1c.0: pciehp: Slot(8): Link Down > BUG: unable to handle page fault for address: ffffb24d403e5010 > PGD 100000067 P4D 100000067 PUD 1001fe067 PMD 100d97067 PTE 0 > Oops: 0000 [#1] PREEMPT SMP PTI > CPU: 3 PID: 534 Comm: kworker/3:10 Not tainted 6.4.0 #6 > Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./H370M Pro4, > BIOS P3.40 10/25/2018 > Workqueue: pm pm_runtime_work > RIP: 0010:ioread32+0x2e/0x70 > Code: ff 03 00 77 25 48 81 ff 00 00 01 00 77 14 8b 15 08 d9 54 01 b8 ff ff ff ff > 85 d2 75 14 c3 cc cc cc cc 89 fa ed c3 cc cc cc cc <8b> 07 c3 cc cc cc cc 55 83 > ea 01 48 89 fe 48 c7 c7 98 6f 15 99 48 > RSP: 0018:ffffb24d40a5bd78 EFLAGS: 00010296 > RAX: ffffb24d403e5000 RBX: 0000000000000152 RCX: 000000000000007f > RDX: 000000000000ff00 RSI: ffffb24d403e5010 RDI: ffffb24d403e5010 > RBP: ffffb24d40a5bd98 R08: ffffb24d403e5010 R09: 0000000000000000 > R10: ffff9074cd95e7f4 R11: 0000000000000003 R12: 000000000000007f > R13: ffff9074e1a68c00 R14: ffff9074e1a68d00 R15: 0000000000009003 > FS: 0000000000000000(0000) GS:ffff90752a180000(0000) > knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: ffffb24d403e5010 CR3: 0000000152832006 CR4: 00000000003706e0 > Call Trace: > <TASK> > ? show_regs+0x68/0x70 > ? __die_body+0x20/0x70 > ? __die+0x2b/0x40 > ? page_fault_oops+0x160/0x480 > ? search_bpf_extables+0x63/0x90 > ? ioread32+0x2e/0x70 > ? search_exception_tables+0x5f/0x70 > ? kernelmode_fixup_or_oops+0xa2/0x120 > ? __bad_area_nosemaphore+0x179/0x230 > ? bad_area_nosemaphore+0x16/0x20 > ? do_kern_addr_fault+0x8b/0xa0 > ? exc_page_fault+0xe5/0x180 > ? asm_exc_page_fault+0x27/0x30 > ? ioread32+0x2e/0x70 > ? rtsx_pci_write_register+0x5b/0x90 [rtsx_pci] > rtsx_set_l1off_sub+0x1c/0x30 [rtsx_pci] > rts5261_set_l1off_cfg_sub_d0+0x36/0x40 [rtsx_pci] > rtsx_pci_runtime_idle+0xc7/0x160 [rtsx_pci] > ? __pfx_pci_pm_runtime_idle+0x10/0x10 > pci_pm_runtime_idle+0x34/0x70 > rpm_idle+0xc4/0x2b0 > pm_runtime_work+0x93/0xc0 > process_one_work+0x21a/0x430 > worker_thread+0x4a/0x3c0 > ? __pfx_worker_thread+0x10/0x10 > kthread+0x106/0x140 > ? __pfx_kthread+0x10/0x10 > ret_from_fork+0x29/0x50 > </TASK> > Modules linked in: nvme nvme_core snd_hda_codec_hdmi > snd_sof_pci_intel_cnl snd_sof_intel_hda_common snd_hda_codec_realtek > snd_hda_codec_generic snd_soc_hdac_hda soundwire_intel ledtrig_audio > nls_iso8859_1 soundwire_generic_allocation soundwire_cadence > snd_sof_intel_hda_mlink snd_sof_intel_hda snd_sof_pci snd_sof_xtensa_dsp > snd_sof snd_sof_utils snd_hda_ext_core snd_soc_acpi_intel_match > snd_soc_acpi soundwire_bus snd_soc_core snd_compress ac97_bus > snd_pcm_dmaengine snd_hda_intel i915 snd_intel_dspcfg snd_intel_sdw_acpi > intel_rapl_msr snd_hda_codec intel_rapl_common snd_hda_core > x86_pkg_temp_thermal intel_powerclamp snd_hwdep coretemp snd_pcm > kvm_intel drm_buddy ttm mei_hdcp kvm drm_display_helper snd_seq_midi > snd_seq_midi_event cec crct10dif_pclmul ghash_clmulni_intel sha512_ssse3 > aesni_intel crypto_simd rc_core cryptd rapl snd_rawmidi drm_kms_helper > binfmt_misc intel_cstate i2c_algo_bit joydev snd_seq snd_seq_device > syscopyarea wmi_bmof snd_timer sysfillrect input_leds snd ee1004 sysimgblt > mei_me soundcore > mei intel_pch_thermal mac_hid acpi_tad acpi_pad sch_fq_codel msr > parport_pc ppdev lp ramoops drm parport reed_solomon efi_pstore ip_tables > x_tables autofs4 hid_generic usbhid hid rtsx_pci_sdmmc crc32_pclmul ahci > e1000e i2c_i801 i2c_smbus rtsx_pci xhci_pci libahci xhci_pci_renesas video > wmi > CR2: ffffb24d403e5010 > ---[ end trace 0000000000000000 ]--- > > This happens because scheduled pm_runtime_idle() is not cancelled. > > So before releasing the device, stop all runtime power managements by > using pm_runtime_barrier() to fix the issue. > > Link: > https://lore.kernel.org/all/2ce258f371234b1f8a1a470d5488d00e@xxxxxxxxxxx > / > Cc: Ricky Wu <ricky_wu@xxxxxxxxxxx> > Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx> Tested-by: Ricky Wu <ricky_wu@xxxxxxxxxxx> I tested this patch, the result is GOOD. This issue is not happening with multiple plugging and unplugging > --- > v3: > Move the change the device driver core. > > v2: > Cover more cases than just pciehp. > > drivers/base/dd.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/base/dd.c b/drivers/base/dd.c > index 85152537dbf1..38c815e2b3a2 100644 > --- a/drivers/base/dd.c > +++ b/drivers/base/dd.c > @@ -1244,6 +1244,7 @@ static void __device_release_driver(struct device > *dev, struct device *parent) > > drv = dev->driver; > if (drv) { > + pm_runtime_barrier(dev); > pm_runtime_get_sync(dev); > > while (device_links_busy(dev)) { > -- > 2.34.1
