The "msg_addr" variable is u64. However, the "aligned_offset" is an unsigned int. This means that when the code does: msg_addr &= ~aligned_offset; it will unintentionally zero out the high 32 bits. Use ALIGN_DOWN() to do the alignment instead. Cc: stable@xxxxxxxxxxxxxxx Fixes: 2217fffcd63f ("PCI: dwc: endpoint: Fix dw_pcie_ep_raise_msix_irq() alignment support") Signed-off-by: Dan Carpenter <dan.carpenter@xxxxxxxxxx> Reviewed-by: Niklas Cassel <cassel@xxxxxxxxxx> --- v4: Add stable and r-b from Niklas v3: Use ALIGN_DOWN() v2: fix typo in commit message drivers/pci/controller/dwc/pcie-designware-ep.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c index 5befed2dc02b..51679c6702cf 100644 --- a/drivers/pci/controller/dwc/pcie-designware-ep.c +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c @@ -551,7 +551,7 @@ int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no, } aligned_offset = msg_addr & (epc->mem->window.page_size - 1); - msg_addr &= ~aligned_offset; + msg_addr = ALIGN_DOWN(msg_addr, epc->mem->window.page_size); ret = dw_pcie_ep_map_addr(epc, func_no, 0, ep->msi_mem_phys, msg_addr, epc->mem->window.page_size); if (ret) -- 2.43.0