On Tue, Jan 23, 2024 at 8:51 PM Alex Williamson
<alex.williamson@xxxxxxxxxx> wrote:
>
> On Tue, 23 Jan 2024 20:40:32 +0100
> "Rafael J. Wysocki" <rafael@xxxxxxxxxx> wrote:
>
> > On Tue, Jan 23, 2024 at 7:56 PM Alex Williamson
> > <alex.williamson@xxxxxxxxxx> wrote:
> > >
> > > The commit noted in fixes added a bogus requirement that runtime PM
> > > managed devices need to be in the RPM_ACTIVE state for PME polling.
> > > In fact, only devices in low power states should be polled.
> > >
> > > However there's still a requirement that the device config space must
> > > be accessible, which has implications for both the current state of
> > > the polled device and the parent bridge, when present. It's not
> > > sufficient to assume the bridge remains in D0 and cases have been
> > > observed where the bridge passes the D0 test, but the PM state
> > > indicates RPM_SUSPENDING and config space of the polled device becomes
> > > inaccessible during pci_pme_wakeup().
> > >
> > > Therefore, since the bridge is already effectively required to be in
> > > the RPM_ACTIVE state, formalize this in the code and elevate the PM
> > > usage count to maintain the state while polling the subordinate
> > > device.
> > >
> > > Cc: Lukas Wunner <lukas@xxxxxxxxx>
> > > Cc: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
> > > Cc: Rafael J. Wysocki <rafael@xxxxxxxxxx>
> > > Fixes: d3fcd7360338 ("PCI: Fix runtime PM race with PME polling")
> > > Reported-by: Sanath S <sanath.s@xxxxxxx>
> > > Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218360
> > > Signed-off-by: Alex Williamson <alex.williamson@xxxxxxxxxx>
> > > ---
> > > drivers/pci/pci.c | 37 ++++++++++++++++++++++---------------
> > > 1 file changed, 22 insertions(+), 15 deletions(-)
> > >
> > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> > > index bdbf8a94b4d0..764d7c977ef4 100644
> > > --- a/drivers/pci/pci.c
> > > +++ b/drivers/pci/pci.c
> > > @@ -2433,29 +2433,36 @@ static void pci_pme_list_scan(struct work_struct *work)
> > > if (pdev->pme_poll) {
> > > struct pci_dev *bridge = pdev->bus->self;
> > > struct device *dev = &pdev->dev;
> > > - int pm_status;
> > > + struct device *bdev = bridge ? &bridge->dev : NULL;
> > > + int bref = 0;
> > >
> > > /*
> > > - * If bridge is in low power state, the
> > > - * configuration space of subordinate devices
> > > - * may be not accessible
> > > + * If we have a bridge, it should be in an active/D0
> > > + * state or the configuration space of subordinate
> > > + * devices may not be accessible or stable over the
> > > + * course of the call.
> > > */
> > > - if (bridge && bridge->current_state != PCI_D0)
> > > - continue;
> > > + if (bdev) {
> > > + bref = pm_runtime_get_if_active(bdev, true);
> > > + if (!bref)
> >
> > I would check bref <= 0 here.
> >
> > > + continue;
> > > +
> > > + if (bridge->current_state != PCI_D0)
> >
> > Isn't the power state guaranteed to be PCI_D0 at this point? If it
> > isn't, then why?
>
> Both of these seem necessary to support !CONFIG_PM, where bref would be
> -EINVAL and provides no indication of the current_state. Is that
> incorrect? Thanks,
Well, CONFIG_PCIE_PME depends on CONFIG_PM, so I'm not sure how
dev->pme_poll can be set without it.
