Add a sample board file describing the file's format and with the list of devices expected to be probed on the google,spherion machine as an example. Test output: TAP version 13 Using board file: boards/google,spherion.yaml 1..8 ok 1 /usb2-controller@11200000/1.4.1/camera.device ok 2 /usb2-controller@11200000/1.4.1/camera.0.driver ok 3 /usb2-controller@11200000/1.4.1/camera.1.driver ok 4 /usb2-controller@11200000/1.4.2/bluetooth.device ok 5 /usb2-controller@11200000/1.4.2/bluetooth.0.driver ok 6 /usb2-controller@11200000/1.4.2/bluetooth.1.driver ok 7 /pci-controller@11230000/0.0/0.0/wifi.device ok 8 /pci-controller@11230000/0.0/0.0/wifi.driver Totals: pass:8 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx> --- .../selftests/devices/boards/google,spherion.yaml | 50 ++++++++++++++++++++++ 1 file changed, 50 insertions(+) diff --git a/tools/testing/selftests/devices/boards/google,spherion.yaml b/tools/testing/selftests/devices/boards/google,spherion.yaml new file mode 100644 index 000000000000..17157ecd8c14 --- /dev/null +++ b/tools/testing/selftests/devices/boards/google,spherion.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# This is the device definition for the Google Spherion Chromebook. +# The filename "google,spherion" comes from the Devicetree compatible, so this +# file will be automatically used when the test is run on that machine. +# +# The top-level is a list of controllers, either for USB or PCI(e). +# Every controller needs to have a 'type' key set to either 'usb-controller' or +# 'pci-controller'. +# Every controller needs to be uniquely identified on the platform. To achieve +# this, several optional keys can be used: +# - dt-mmio: identify the MMIO address of the controller as defined in the +# Devicetree. +# - usb-version: for USB controllers to differentiate between USB3 and USB2 +# buses sharing the same controller. +# - acpi-uid: _UID property of the controller as supplied by the ACPI. Useful to +# distinguish between multiple PCI host controllers. +# +# The 'devices' key defines a list of devices that are accessible under that +# controller. A device might be a leaf device or another controller (see +# 'Dell Inc.,XPS 13 9300.yaml'). +# +# The 'path' key is needed for every child device (that is, not top-level) to +# define how to reach this device from the parent controller. For USB devices it +# follows the format \d(.\d)* and denotes the port in the hub at each level in +# the USB topology. For PCI devices it follows the format \d.\d(/\d.\d)* +# denoting the device (identified by device-function pair) at each level in the +# PCI topology. +# +# The 'name' key is used in the leaf devices to name the device for clarity in +# the test output. +# +# For USB leaf devices, the 'interfaces' key should contain a list of the +# interfaces in that device that should be bound to a driver. +# +- type: usb-controller + dt-mmio: 11200000 + usb-version: 2 + devices: + - path: 1.4.1 + interfaces: [0, 1] + name: camera + - path: 1.4.2 + interfaces: [0, 1] + name: bluetooth +- type: pci-controller + dt-mmio: 11230000 + devices: + - path: 0.0/0.0 + name: wifi -- 2.43.0
