On Wed, Dec 27, 2023 at 01:27:19PM -0500, Frank Li wrote:
Subject: PCI: imx6: Introduce init_phy() callback to simplify PHY initialization
> Add drvdata::init_phy() callback function, so difference SOC choose
> difference callback function to simple switch-case logic.
>
Same subject can be used in commit message.
> Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> ---
>
> Notes:
> change from v1 to v4:
> - none
>
> drivers/pci/controller/dwc/pci-imx6.c | 135 ++++++++++++++------------
> 1 file changed, 71 insertions(+), 64 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 717e8fa030deb..d66a2db53bdb7 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -69,6 +69,9 @@ enum imx6_pcie_variants {
> #define IMX6_PCIE_MAX_CLKS 6
>
> #define IMX6_PCIE_MAX_INSTANCES 2
> +
> +struct imx6_pcie;
> +
> struct imx6_pcie_drvdata {
> enum imx6_pcie_variants variant;
> enum dw_pcie_device_mode mode;
> @@ -80,6 +83,7 @@ struct imx6_pcie_drvdata {
> const u32 ltssm_mask;
> const u32 mode_off[IMX6_PCIE_MAX_INSTANCES];
> const u32 mode_mask[IMX6_PCIE_MAX_INSTANCES];
> + int (*init_phy)(struct imx6_pcie *pcie);
> };
>
> struct imx6_pcie {
> @@ -323,76 +327,69 @@ static int pcie_phy_write(struct imx6_pcie *imx6_pcie, int addr, u16 data)
> return 0;
> }
>
> -static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
> +static int imx8mq_pcie_init_phy(struct imx6_pcie *imx6_pcie)
> {
> - switch (imx6_pcie->drvdata->variant) {
> - case IMX8MM:
> - case IMX8MM_EP:
> - case IMX8MP:
> - case IMX8MP_EP:
> - /*
> - * The PHY initialization had been done in the PHY
> - * driver, break here directly.
> - */
> - break;
> - case IMX8MQ:
> - case IMX8MQ_EP:
> - /*
> - * TODO: Currently this code assumes external
> - * oscillator is being used
> - */
> + /*
> + * TODO: Currently this code assumes external
> + * oscillator is being used
Wrap the comments to 80 column.
> + */
> + regmap_update_bits(imx6_pcie->iomuxc_gpr,
> + imx6_pcie_grp_offset(imx6_pcie),
> + IMX8MQ_GPR_PCIE_REF_USE_PAD,
> + IMX8MQ_GPR_PCIE_REF_USE_PAD);
> + /*
> + * Regarding the datasheet, the PCIE_VPH is suggested
> + * to be 1.8V. If the PCIE_VPH is supplied by 3.3V, the
> + * VREG_BYPASS should be cleared to zero.
> + */
Same here.
> + if (imx6_pcie->vph && regulator_get_voltage(imx6_pcie->vph) > 3000000)
> regmap_update_bits(imx6_pcie->iomuxc_gpr,
> imx6_pcie_grp_offset(imx6_pcie),
> - IMX8MQ_GPR_PCIE_REF_USE_PAD,
> - IMX8MQ_GPR_PCIE_REF_USE_PAD);
> - /*
> - * Regarding the datasheet, the PCIE_VPH is suggested
> - * to be 1.8V. If the PCIE_VPH is supplied by 3.3V, the
> - * VREG_BYPASS should be cleared to zero.
> - */
> - if (imx6_pcie->vph &&
> - regulator_get_voltage(imx6_pcie->vph) > 3000000)
> - regmap_update_bits(imx6_pcie->iomuxc_gpr,
> - imx6_pcie_grp_offset(imx6_pcie),
> - IMX8MQ_GPR_PCIE_VREG_BYPASS,
> - 0);
> - break;
> - case IMX7D:
> - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
> + IMX8MQ_GPR_PCIE_VREG_BYPASS,
> + 0);
> +
> + return 0;
> +}
> +
> +static int imx7d_pcie_init_phy(struct imx6_pcie *imx6_pcie)
> +{
> + return regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
For consistency, return 0.
- Mani
--
மணிவண்ணன் சதாசிவம்
