On Thu, Dec 14, 2023 at 03:28:29PM +0800, Minda Chen wrote:
> The event num is different in other platform. For re-using interrupt
> process codes, replace macros with variable.
"The number of events is different across platforms. In order to
share interrupt processing code, add a variable that defines the
number of events so that it can be set per-platform instead of
hardcoding it".
Lorenzo
>
> Signed-off-by: Minda Chen <minda.chen@xxxxxxxxxxxxxxxx>
> Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> ---
> drivers/pci/controller/plda/pcie-microchip-host.c | 8 +++++---
> drivers/pci/controller/plda/pcie-plda.h | 1 +
> 2 files changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
> index 506e6eeadc76..7b3f4f74745d 100644
> --- a/drivers/pci/controller/plda/pcie-microchip-host.c
> +++ b/drivers/pci/controller/plda/pcie-microchip-host.c
> @@ -654,7 +654,7 @@ static void plda_handle_event(struct irq_desc *desc)
>
> events = mc_get_events(port);
>
> - for_each_set_bit(bit, &events, NUM_EVENTS)
> + for_each_set_bit(bit, &events, port->num_events)
> generic_handle_domain_irq(port->event_domain, bit);
>
> chained_irq_exit(chip, desc);
> @@ -817,7 +817,8 @@ static int plda_pcie_init_irq_domains(struct plda_pcie_rp *port)
> return -EINVAL;
> }
>
> - port->event_domain = irq_domain_add_linear(pcie_intc_node, NUM_EVENTS,
> + port->event_domain = irq_domain_add_linear(pcie_intc_node,
> + port->num_events,
> &plda_event_domain_ops,
> port);
> if (!port->event_domain) {
> @@ -921,7 +922,7 @@ static int plda_init_interrupts(struct platform_device *pdev, struct plda_pcie_r
> if (irq < 0)
> return -ENODEV;
>
> - for (i = 0; i < NUM_EVENTS; i++) {
> + for (i = 0; i < port->num_events; i++) {
> event_irq = irq_create_mapping(port->event_domain, i);
> if (!event_irq) {
> dev_err(dev, "failed to map hwirq %d\n", i);
> @@ -1013,6 +1014,7 @@ static int mc_host_probe(struct platform_device *pdev)
>
> bridge_base_addr = port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
> plda->bridge_addr = bridge_base_addr;
> + plda->num_events = NUM_EVENTS;
>
> /* Allow enabling MSI by disabling MSI-X */
> val = readl(bridge_base_addr + PCIE_PCI_IRQ_DW0);
> diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
> index 3deefd35fa5a..e3d35cef9894 100644
> --- a/drivers/pci/controller/plda/pcie-plda.h
> +++ b/drivers/pci/controller/plda/pcie-plda.h
> @@ -118,6 +118,7 @@ struct plda_pcie_rp {
> raw_spinlock_t lock;
> struct plda_msi msi;
> void __iomem *bridge_addr;
> + int num_events;
> };
>
> void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
> --
> 2.17.1
>
