[PATCH v5 02/16] PCI: imx6: Simplify phy handling by using by using IMX6_PCIE_FLAG_HAS_PHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Refactors the phy handling logic in the imx6 PCI driver by adding
IMX6_PCIE_FLAG_HAS_PHY bitmask define for drvdata::flags.

The drvdata::flags and a bitmask ensures a cleaner and more scalable
switch-case structure for handling phy.

Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---

Notes:
    Change from v4 to v5:
    - none, Keep IMX6_PCIE_FLAG_HAS_PHY to indicate dts mismatch when platform
    require phy suppport.
    
    Change from v1 to v3:
    - none

 drivers/pci/controller/dwc/pci-imx6.c | 23 ++++++++++++++++-------
 1 file changed, 16 insertions(+), 7 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 50d9faaa17f71..4d620249f3d52 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -60,6 +60,9 @@ enum imx6_pcie_variants {
 #define IMX6_PCIE_FLAG_IMX6_PHY			BIT(0)
 #define IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE	BIT(1)
 #define IMX6_PCIE_FLAG_SUPPORTS_SUSPEND		BIT(2)
+#define IMX6_PCIE_FLAG_HAS_PHY			BIT(3)
+
+#define imx6_check_flag(pci, val)     (pci->drvdata->flags & val)
 
 #define IMX6_PCIE_MAX_CLKS       6
 
@@ -1277,6 +1280,13 @@ static int imx6_pcie_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	if (imx6_check_flag(imx6_pcie, IMX6_PCIE_FLAG_HAS_PHY)) {
+		imx6_pcie->phy = devm_phy_get(dev, "pcie-phy");
+		if (IS_ERR(imx6_pcie->phy))
+			return dev_err_probe(dev, PTR_ERR(imx6_pcie->phy),
+					     "failed to get pcie phy\n");
+	}
+
 	switch (imx6_pcie->drvdata->variant) {
 	case IMX7D:
 		if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
@@ -1306,11 +1316,6 @@ static int imx6_pcie_probe(struct platform_device *pdev)
 			return dev_err_probe(dev, PTR_ERR(imx6_pcie->apps_reset),
 					     "failed to get pcie apps reset control\n");
 
-		imx6_pcie->phy = devm_phy_get(dev, "pcie-phy");
-		if (IS_ERR(imx6_pcie->phy))
-			return dev_err_probe(dev, PTR_ERR(imx6_pcie->phy),
-					     "failed to get pcie phy\n");
-
 		break;
 	default:
 		break;
@@ -1444,13 +1449,15 @@ static const struct imx6_pcie_drvdata drvdata[] = {
 	},
 	[IMX8MM] = {
 		.variant = IMX8MM,
-		.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
+		.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND |
+			 IMX6_PCIE_FLAG_HAS_PHY,
 		.gpr = "fsl,imx8mm-iomuxc-gpr",
 		.clk_names = {"pcie_bus", "pcie", "pcie_aux"},
 	},
 	[IMX8MP] = {
 		.variant = IMX8MP,
-		.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
+		.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND |
+			 IMX6_PCIE_FLAG_HAS_PHY,
 		.gpr = "fsl,imx8mp-iomuxc-gpr",
 		.clk_names = {"pcie_bus", "pcie", "pcie_aux"},
 	},
@@ -1462,12 +1469,14 @@ static const struct imx6_pcie_drvdata drvdata[] = {
 	},
 	[IMX8MM_EP] = {
 		.variant = IMX8MM_EP,
+		.flags = IMX6_PCIE_FLAG_HAS_PHY,
 		.mode = DW_PCIE_EP_TYPE,
 		.gpr = "fsl,imx8mm-iomuxc-gpr",
 		.clk_names = {"pcie_bus", "pcie", "pcie_aux"},
 	},
 	[IMX8MP_EP] = {
 		.variant = IMX8MP_EP,
+		.flags = IMX6_PCIE_FLAG_HAS_PHY,
 		.mode = DW_PCIE_EP_TYPE,
 		.gpr = "fsl,imx8mp-iomuxc-gpr",
 		.clk_names = {"pcie_bus", "pcie", "pcie_aux"},
-- 
2.34.1





[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux