This series adds support for the below ECR approved by ASWG. 1) MADT - https://drive.google.com/file/d/1oMGPyOD58JaPgMl1pKasT-VKsIKia7zR/view?usp=sharing The series primarily enables irqchip drivers for RISC-V ACPI based platforms. The series can be broadly categorized like below. 1) PCI ACPI related functions are migrated from arm64 to common file so that we don't need to duplicate them for RISC-V. 2) Introduced support for fw_devlink for ACPI nodes for IRQ dependency. This helps to support deferred probe of interrupt controller drivers. 3) Modified pnp_irq() to try registering the IRQ again if it sees it in disabled state. This solution is similar to how platform_get_irq_optional() works for regular platform devices. 4) Added support for re-ordering the probe of interrupt controllers when IRQCHIP_ACPI_DECLARE is used. 5) ACPI support added in RISC-V interrupt controller drivers. This series is based on Anup's AIA v11 series. Since Anup's AIA v11 is not merged yet and first time introducing fw_devlink, deferred probe and reordering support for IRQCHIP probe, this series is still kept as RFC. Looking forward for the feedback! Changes since RFC v2: 1) Introduced fw_devlink for ACPI nodes for IRQ dependency. 2) Dropped patches in drivers which are not required due to fw_devlink support. 3) Dropped pci_set_msi() patch and added a patch in pci_create_root_bus(). 4) Updated pnp_irq() patch so that none of the actual PNP drivers need to change. Changes since RFC v1: 1) Abandoned swnode approach as per Marc's feedback. 2) To cope up with AIA series changes which changed irqchip driver probe from core_initcall() to platform_driver, added patches to support deferred probing. 3) Rebased on top of Anup's AIA v11 and added tags. To test the series, 1) Qemu should be built using the riscv_acpi_b2_v8 branch at https://github.com/vlsunil/qemu.git 2) EDK2 should be built using the instructions at: https://github.com/tianocore/edk2/blob/master/OvmfPkg/RiscVVirt/README.md 3) Build Linux using this series on top of Anup's AIA v11 series. Run Qemu: qemu-system-riscv64 \ -M virt,pflash0=pflash0,pflash1=pflash1,aia=aplic-imsic \ -m 2G -smp 8 \ -serial mon:stdio \ -device virtio-gpu-pci -full-screen \ -device qemu-xhci \ -device usb-kbd \ -blockdev node-name=pflash0,driver=file,read-only=on,filename=RISCV_VIRT_CODE.fd \ -blockdev node-name=pflash1,driver=file,filename=RISCV_VIRT_VARS.fd \ -netdev user,id=net0 -device virtio-net-pci,netdev=net0 \ -kernel arch/riscv/boot/Image \ -initrd rootfs.cpio \ -append "root=/dev/ram ro console=ttyS0 rootwait earlycon=uart8250,mmio,0x10000000" To boot with APLIC only, use aia=aplic. To boot with PLIC, remove aia= option. This series is also available in acpi_b2_v3_riscv_aia_v11 branch at https://github.com/vlsunil/linux.git Based-on: 20231023172800.315343-1-apatel@xxxxxxxxxxxxxxxx (https://lore.kernel.org/lkml/20231023172800.315343-1-apatel@xxxxxxxxxxxxxxxx/) Sunil V L (17): arm64: PCI: Migrate ACPI related functions to pci-acpi.c RISC-V: ACPI: Implement PCI related functionality PCI: Make pci_create_root_bus() declare its reliance on MSI domains ACPI: Add fw_devlink support for ACPI fwnode for IRQ dependency ACPI: irq: Add support for deferred probe in acpi_register_gsi() pnp.h: Reconfigure IRQ in pnp_irq() to support deferred probe ACPI: scan.c: Add weak arch specific function to reorder the IRQCHIP probe ACPI: RISC-V: Implement arch function to reorder irqchip probe entries irqchip: riscv-intc: Add ACPI support for AIA irqchip: riscv-imsic: Add ACPI support irqchip: riscv-aplic: Add ACPI support irqchip: irq-sifive-plic: Add ACPI support ACPI: bus: Add RINTC IRQ model for RISC-V ACPI: bus: Add acpi_riscv_init function ACPI: RISC-V: Create APLIC platform device ACPI: RISC-V: Create PLIC platform device irqchip: riscv-intc: Set ACPI irqmodel arch/arm64/kernel/pci.c | 191 --------------------- arch/riscv/Kconfig | 2 + arch/riscv/include/asm/irq.h | 46 +++++ arch/riscv/kernel/acpi.c | 31 ++-- drivers/acpi/bus.c | 4 + drivers/acpi/irq.c | 22 +++ drivers/acpi/property.c | 20 +++ drivers/acpi/riscv/Makefile | 2 +- drivers/acpi/riscv/init.c | 15 ++ drivers/acpi/riscv/init.h | 6 + drivers/acpi/riscv/irq.c | 169 ++++++++++++++++++ drivers/acpi/scan.c | 3 + drivers/irqchip/irq-riscv-aplic-direct.c | 21 ++- drivers/irqchip/irq-riscv-aplic-main.c | 64 ++++--- drivers/irqchip/irq-riscv-aplic-main.h | 1 + drivers/irqchip/irq-riscv-aplic-msi.c | 9 +- drivers/irqchip/irq-riscv-imsic-early.c | 52 +++++- drivers/irqchip/irq-riscv-imsic-platform.c | 51 ++++-- drivers/irqchip/irq-riscv-imsic-state.c | 128 +++++++------- drivers/irqchip/irq-riscv-imsic-state.h | 2 +- drivers/irqchip/irq-riscv-intc.c | 96 ++++++++++- drivers/irqchip/irq-sifive-plic.c | 76 ++++++-- drivers/pci/pci-acpi.c | 182 ++++++++++++++++++++ drivers/pci/probe.c | 1 + drivers/pnp/pnpacpi/core.c | 7 + include/linux/acpi.h | 18 ++ include/linux/irqchip/riscv-imsic.h | 10 ++ include/linux/pnp.h | 14 +- 28 files changed, 895 insertions(+), 348 deletions(-) create mode 100644 drivers/acpi/riscv/init.c create mode 100644 drivers/acpi/riscv/init.h create mode 100644 drivers/acpi/riscv/irq.c -- 2.39.2
