Re: [PATCH 04/10] phy: qcom: Add support for Pipe clock rate from device data

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 14 Dec 2023 at 08:29, Praveenkumar I <quic_ipkumar@xxxxxxxxxxx> wrote:
>
> Qualcomm IPQ5332 has the same PCIe UNIPHY PHY with different pipe
> clock rate. Add support to define the pipe clock rate in device
> data.
>
> Signed-off-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>

With the name fixed:

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>

> ---
> This patch depends on the below series which adds PCIe support in
> Qualcomm IPQ5018
> https://lore.kernel.org/all/20231003120846.28626-1-quic_nsekar@xxxxxxxxxxx/
>
>  drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c b/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c
> index 5ef6ae7276cf..9f9a03faf6fa 100644
> --- a/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c
> @@ -54,6 +54,7 @@ struct uniphy_pcie_data {
>         unsigned int phy_type;
>         const struct uniphy_regs *init_seq;
>         unsigned int init_seq_num;
> +       unsigned int pipe_clk_rate;
>  };
>
>  struct qcom_uniphy_pcie {
> @@ -117,6 +118,7 @@ static const struct uniphy_pcie_data ipq5018_2x2_data = {
>         .phy_type       = PHY_TYPE_PCIE_GEN2,
>         .init_seq       = ipq5018_regs,
>         .init_seq_num   = ARRAY_SIZE(ipq5018_regs),
> +       .pipe_clk_rate  = 125000000,
>  };
>
>  static void qcom_uniphy_pcie_init(struct qcom_uniphy_pcie *phy)
> @@ -232,6 +234,7 @@ static int qcom_uniphy_pcie_get_resources(struct platform_device *pdev,
>  static int phy_pipe_clk_register(struct qcom_uniphy_pcie  *phy,
>                                  struct device_node *np)
>  {
> +       const struct uniphy_pcie_data *data = phy->data;
>         struct clk_fixed_rate *fixed;
>         struct clk_init_data init = { };
>         int ret;
> @@ -247,7 +250,7 @@ static int phy_pipe_clk_register(struct qcom_uniphy_pcie  *phy,
>                 return -ENOMEM;
>
>         init.ops = &clk_fixed_rate_ops;
> -       fixed->fixed_rate = 125000000;
> +       fixed->fixed_rate = data->pipe_clk_rate;
>         fixed->hw.init = &init;
>
>         ret = devm_clk_hw_register(phy->dev, &fixed->hw);
> --
> 2.34.1
>
>


-- 
With best wishes
Dmitry




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux