Hi all, On 12/3/23 05:10, Mario Limonciello wrote: > The policy for whether PCI bridges are allowed to select D3 is dictated > by empirical results that are enumerated into pci_bridge_d3_possible(). > > In Windows this behaves differently in that Windows internal policy is > not used for devices when a power engine plugin driver provided by the > SOC vendor is installed. This driver is used to decide the policy in > those cases. > > This series implements a system that lets drivers register such a policy > control as well. It isn't activated for any SOCs by default. > > This is heavily leveraged from the work in [1] > > [1] https://lore.kernel.org/platform-driver-x86/20230906184354.45846-1-mario.limonciello@xxxxxxx/ As I mentioned in the v1 thread, I expect this entire series to go upstream through the PCI or ACPI trees, so I'm dropping this from my queue. Regards, Hans > > v1->v2: > * Pick up tags > * Rebase on v6.7-rc4 > > Mario Limonciello (4): > PCI: Make d3cold_allowed sysfs attribute read only > PCI: Refresh root ports in pci_bridge_d3_update() > ACPI: x86: s2idle: Export symbol for fetching constraints for module > use > platform/x86/amd: pmc: Add support for using constraints to decide D3 > policy > > Documentation/ABI/testing/sysfs-bus-pci | 4 +- > drivers/acpi/x86/s2idle.c | 1 + > drivers/pci/pci-acpi.c | 2 +- > drivers/pci/pci-sysfs.c | 14 +----- > drivers/pci/pci.c | 12 ++++-- > drivers/platform/x86/amd/pmc/pmc.c | 57 +++++++++++++++++++++++++ > include/linux/pci.h | 1 - > 7 files changed, 72 insertions(+), 19 deletions(-) > > > base-commit: 33cc938e65a98f1d29d0a18403dbbee050dcad9a
