@Stable-Kernel: You receive this patch series because its first patch fixes leaks in PCI. Changes in v3: - Create a separate patch for the leaks in lib/iomap.c. Make it the series' first patch. (Arnd) - Turns out the aforementioned bug wasn't just accidentally removing iounmap() with the ifdef, it was also missing ioport_unmap() to begin with. Add it. - Move the ARCH_WANTS_GENERIC_IOMEM_IS_IOPORT-mechanism from asm-generic/io.h to asm-generic/ioport.h. (Arnd) - Adjust the implementation of iomem_is_ioport() in asm-generic/io.h so that it matches exactly what pci_iounmap() previously did in lib/pci_iomap.c. (Arnd) - Move the CONFIG_HAS_IOPORT guard in asm-generic/io.h so that iomem_is_ioport() will always be compiled and just returns false if there are no ports. - Add TODOs to several places informing about the generic iomem_is_ioport() in lib/iomap.c not being generic. - Add TODO about the followup work to make drivers/pci/iomap.c's pci_iounmap() actually generic. Changes in v2: - Replace patch 4, previously extending the comment about pci_iounmap() in lib/iomap.c, with a patch that moves pci_iounmap() from that file to drivers/pci/iomap.c, creating a unified version there. (Arnd) - Implement iomem_is_ioport() as a new helper in asm-generic/io.h and lib/iomap.c. (Arnd) - Move the build rule in drivers/pci/Makefile for iomap.o under the guard of #if PCI. This had to be done because when just checking for GENERIC_PCI_IOMAP being defined, the functions don't disappear, which was the case previously in lib/pci_iomap.c, where the entire file was made empty if PCI was not set by the guard #ifdef PCI. (Intel's Bots) - Rephares all patches' commit messages a little bit. Sooooooooo. I reworked v1. Please review this carefully, the IO-Ranges are obviously a bit tricky, as is the build-system / ifdef-ery. Arnd has suggested that architectures defining a custom inb() need their own iomem_is_ioport(), as well. I've grepped for inb() and found the following list of archs that define their own: - alpha - arm - m68k <-- - parisc - powerpc - sh - sparc - x86 <-- All of those have their own definitons of pci_iounmap(). Therefore, they don't need our generic version in the first place and, thus, also need no iomem_is_ioport(). The two exceptions are x86 and m68k. The former uses lib/iomap.c through CONFIG_GENERIC_IOMAP, as Arnd pointed out in the previous discussion (thus, CONFIG_GENERIC_IOMAP is not really generic in this regard). So as I see it, only m68k WOULD need its own custom definition of iomem_is_ioport(). But as I understand it it doesn't because it uses the one from asm-generic/pci_iomap.h ?? I wasn't entirely sure how to deal with the address ranges for the generic implementation in asm-generic/io.h. It's marked with a TODO. Input appreciated. I removed the guard around define pci_iounmap in asm-generic/io.h. An alternative would be to have it be guarded by CONFIG_GENERIC_IOMAP and CONFIG_GENERIC_PCI_IOMAP, both. Without such a guard, there is no collision however, because generic pci_iounmap() from drivers/pci/iomap.c will only get pulled in when CONFIG_GENERIC_PCI_IOMAP is actually set. I cross-built this for a variety of architectures, including the usual suspects (s390, m68k). So far successfully. But let's see what Intel's robots say :O P. Original cover letter: Hi! So it seems that since ca. 2007 the PCI code has been scattered a bit. PCI's devres code, which is only ever used by users of the entire PCI-subsystem anyways, resides in lib/devres.c and is guarded by an ifdef PCI, just as the content of lib/pci_iomap.c is. It, thus, seems reasonable to move all of that. As I were at it, I moved as much of the devres-specific code from pci.c to devres.c, too. The only exceptions are four functions that are currently difficult to move. More information about that can be read here [1]. I noticed these scattered files while working on (new) PCI-specific devres functions. If we can get this here merged, I'll soon send another patch series that addresses some API-inconsistencies and could move the devres-part of the four remaining functions. I don't want to do that in this series as this here is only about moving code, whereas the next series would have to actually change API behavior. I successfully (cross-)built this for x86, x86_64, AARCH64 and ARM (allyesconfig). I booted a kernel with it on x86_64, with a Fedora desktop environment as payload. The OS came up fine I hope this is OK. If we can get it in, we'd soon have a very consistent PCI API again. Regards, P. Philipp Stanner (5): lib/pci_iomap.c: fix cleanup bugs in pci_iounmap() lib: move pci_iomap.c to drivers/pci/ lib: move pci-specific devres code to drivers/pci/ pci: move devres code from pci.c to devres.c lib, pci: unify generic pci_iounmap() drivers/pci/Kconfig | 5 + drivers/pci/Makefile | 3 +- drivers/pci/devres.c | 450 +++++++++++++++++++++++++ lib/pci_iomap.c => drivers/pci/iomap.c | 49 +-- drivers/pci/pci.c | 249 -------------- drivers/pci/pci.h | 24 ++ include/asm-generic/io.h | 27 +- include/asm-generic/iomap.h | 21 ++ lib/Kconfig | 3 - lib/Makefile | 1 - lib/devres.c | 208 +----------- lib/iomap.c | 28 +- 12 files changed, 565 insertions(+), 503 deletions(-) create mode 100644 drivers/pci/devres.c rename lib/pci_iomap.c => drivers/pci/iomap.c (75%) -- 2.43.0
