On Fri, Dec 01, 2023 at 11:17:10AM -0500, Frank Li wrote:
> Add suspend/resume support for Layerscape LS1021a.
>
> In the suspend path, PME_Turn_Off message is sent to the endpoint to
> transition the link to L2/L3_Ready state. In this SoC, there is no way to
> check if the controller has received the PME_To_Ack from the endpoint or
> not. So to be on the safer side, the driver just waits for
> PCIE_PME_TO_L2_TIMEOUT_US before asserting the SoC specific PMXMTTURNOFF
> bit to complete the PME_Turn_Off handshake. Then the link would enter L2/L3
> state depending on the VAUX supply.
>
> In the resume path, the link is brought back from L2 to L0 by doing a
> software reset.
>
> Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
One comment below. With that addressed,
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> ---
>
> Notes:
> Change from v4 to v5
> - update comit message
> - remove a empty line
> - use comments
> /* Reset the PEX wrapper to bring the link out of L2 */
> - pci->pp.ops = pcie->drvdata->ops,
> ls_pcie_host_ops to the "ops" member of layerscape_drvdata.
> - don't set pcie->scfg = NULL at error path
>
> Change from v3 to v4
> - update commit message.
> - it is reset a glue logic part for PCI controller.
> - use regmap_write_bits() to reduce code change.
>
> Change from v2 to v3
> - update according to mani's feedback
> change from v1 to v2
> - change subject 'a' to 'A'
>
> drivers/pci/controller/dwc/pci-layerscape.c | 81 ++++++++++++++++++++-
> 1 file changed, 80 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
> index aea89926bcc4f..8bdaae9be7d56 100644
> --- a/drivers/pci/controller/dwc/pci-layerscape.c
> +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> @@ -35,11 +35,19 @@
> #define PF_MCR_PTOMR BIT(0)
> #define PF_MCR_EXL2S BIT(1)
>
> +/* LS1021A PEXn PM Write Control Register */
> +#define SCFG_PEXPMWRCR(idx) (0x5c + (idx) * 0x64)
> +#define PMXMTTURNOFF BIT(31)
> +#define SCFG_PEXSFTRSTCR 0x190
> +#define PEXSR(idx) BIT(idx)
> +
> #define PCIE_IATU_NUM 6
>
> struct ls_pcie_drvdata {
> const u32 pf_off;
> + const struct dw_pcie_host_ops *ops;
> int (*exit_from_l2)(struct dw_pcie_rp *pp);
> + bool scfg_support;
> bool pm_support;
> };
>
> @@ -47,6 +55,8 @@ struct ls_pcie {
> struct dw_pcie *pci;
> const struct ls_pcie_drvdata *drvdata;
> void __iomem *pf_base;
> + struct regmap *scfg;
> + int index;
> bool big_endian;
> };
>
> @@ -171,18 +181,70 @@ static int ls_pcie_host_init(struct dw_pcie_rp *pp)
> return 0;
> }
>
> +static void scfg_pcie_send_turnoff_msg(struct regmap *scfg, u32 reg, u32 mask)
> +{
> + /* Send PME_Turn_Off message */
> + regmap_write_bits(scfg, reg, mask, mask);
> +
> + /*
> + * There is no specific register to check for PME_To_Ack from endpoint.
> + * So on the safe side, wait for PCIE_PME_TO_L2_TIMEOUT_US.
> + */
> + mdelay(PCIE_PME_TO_L2_TIMEOUT_US/1000);
> +
> + /*
> + * Layerscape hardware reference manual recommends clearing the PMXMTTURNOFF bit
> + * to complete the PME_Turn_Off handshake.
> + */
> + regmap_write_bits(scfg, reg, mask, 0);
> +}
> +
> +static void ls1021a_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> + struct ls_pcie *pcie = to_ls_pcie(pci);
> +
> + scfg_pcie_send_turnoff_msg(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), PMXMTTURNOFF);
> +}
> +
> +static int scfg_pcie_exit_from_l2(struct regmap *scfg, u32 reg, u32 mask)
> +{
> + /* Reset the PEX wrapper to bring the link out of L2 */
> + regmap_write_bits(scfg, reg, mask, mask);
> + regmap_write_bits(scfg, reg, mask, 0);
> +
> + return 0;
> +}
> +
> +static int ls1021a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> + struct ls_pcie *pcie = to_ls_pcie(pci);
> +
> + return scfg_pcie_exit_from_l2(pcie->scfg, SCFG_PEXSFTRSTCR, PEXSR(pcie->index));
> +}
> +
> static const struct dw_pcie_host_ops ls_pcie_host_ops = {
> .host_init = ls_pcie_host_init,
> .pme_turn_off = ls_pcie_send_turnoff_msg,
> };
>
> +static const struct dw_pcie_host_ops ls1021a_pcie_host_ops = {
> + .host_init = ls_pcie_host_init,
> + .pme_turn_off = ls1021a_pcie_send_turnoff_msg,
> +};
> +
> static const struct ls_pcie_drvdata ls1021a_drvdata = {
> - .pm_support = false,
> + .pm_support = true,
> + .scfg_support = true,
> + .ops = &ls1021a_pcie_host_ops,
> + .exit_from_l2 = ls1021a_pcie_exit_from_l2,
> };
>
> static const struct ls_pcie_drvdata layerscape_drvdata = {
> .pf_off = 0xc0000,
> .pm_support = true,
> + .ops = &ls_pcie_host_ops;
> .exit_from_l2 = ls_pcie_exit_from_l2,
> };
>
> @@ -205,6 +267,8 @@ static int ls_pcie_probe(struct platform_device *pdev)
> struct dw_pcie *pci;
> struct ls_pcie *pcie;
> struct resource *dbi_base;
> + u32 index[2];
> + int ret;
>
> pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> if (!pcie)
> @@ -220,6 +284,7 @@ static int ls_pcie_probe(struct platform_device *pdev)
> pci->pp.ops = &ls_pcie_host_ops;
This should be removed now.
- Mani
>
> pcie->pci = pci;
> + pci->pp.ops = pcie->drvdata->ops;
>
> dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
> pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
> @@ -230,6 +295,20 @@ static int ls_pcie_probe(struct platform_device *pdev)
>
> pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off;
>
> + if (pcie->drvdata->scfg_support) {
> + pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,pcie-scfg");
> + if (IS_ERR(pcie->scfg)) {
> + dev_err(dev, "No syscfg phandle specified\n");
> + return PTR_ERR(pcie->scfg);
> + }
> +
> + ret = of_property_read_u32_array(dev->of_node, "fsl,pcie-scfg", index, 2);
> + if (ret)
> + return ret;
> +
> + pcie->index = index[1];
> + }
> +
> if (!ls_pcie_is_bridge(pcie))
> return -ENODEV;
>
> --
> 2.34.1
>
--
மணிவண்ணன் சதாசிவம்
