On Thu, Nov 30, 2023 at 03:22:14PM -0500, Frank Li wrote:
> On Thu, Nov 30, 2023 at 03:17:39PM -0500, Frank Li wrote:
> > On Thu, Nov 30, 2023 at 10:21:00PM +0530, Manivannan Sadhasivam wrote:
> > > On Wed, Nov 29, 2023 at 04:44:12PM -0500, Frank Li wrote:
> > > > In the suspend path, PME_Turn_Off message is sent to the endpoint to
> > > > transition the link to L2/L3_Ready state. In this SoC, there is no way to
> > > > check if the controller has received the PME_To_Ack from the endpoint or
> > > > not. So to be on the safer side, the driver just waits for
> > > > PCIE_PME_TO_L2_TIMEOUT_US before asserting the SoC specific PMXMTTURNOFF
> > > > bit to complete the PME_Turn_Off handshake. This link would then enter
> > > > L2/L3 state depending on the VAUX supply.
> > > >
> > > > In the resume path, the link is brought back from L2 to L0 by doing a
> > > > software reset.
> > > >
> > >
> > > Same comment on the patch description as on patch 2/4.
> > >
> > > > Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> > > > ---
> > > >
> > > > Notes:
> > > > Change from v3 to v4
> > > > - Call scfg_pcie_send_turnoff_msg() shared with ls1021a
> > > > - update commit message
> > > >
> > > > Change from v2 to v3
> > > > - Remove ls_pcie_lut_readl(writel) function
> > > >
> > > > Change from v1 to v2
> > > > - Update subject 'a' to 'A'
> > > >
> > > > drivers/pci/controller/dwc/pci-layerscape.c | 63 ++++++++++++++++++++-
> > > > 1 file changed, 62 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
> > > > index 590e07bb27002..d39700b3afaaa 100644
> > > > --- a/drivers/pci/controller/dwc/pci-layerscape.c
> > > > +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> > > > @@ -41,6 +41,15 @@
> > > > #define SCFG_PEXSFTRSTCR 0x190
> > > > #define PEXSR(idx) BIT(idx)
> > > >
> > > > +/* LS1043A PEX PME control register */
> > > > +#define SCFG_PEXPMECR 0x144
> > > > +#define PEXPME(idx) BIT(31 - (idx) * 4)
> > > > +
> > > > +/* LS1043A PEX LUT debug register */
> > > > +#define LS_PCIE_LDBG 0x7fc
> > > > +#define LDBG_SR BIT(30)
> > > > +#define LDBG_WE BIT(31)
> > > > +
> > > > #define PCIE_IATU_NUM 6
> > > >
> > > > struct ls_pcie_drvdata {
> > > > @@ -225,6 +234,45 @@ static int ls1021a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
> > > > return scfg_pcie_exit_from_l2(pcie->scfg, SCFG_PEXSFTRSTCR, PEXSR(pcie->index));
> > > > }
> > > >
> > > > +static void ls1043a_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
> > > > +{
> > > > + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > > > + struct ls_pcie *pcie = to_ls_pcie(pci);
> > > > +
> > > > + scfg_pcie_send_turnoff_msg(pcie->scfg, SCFG_PEXPMECR, PEXPME(pcie->index));
> > > > +}
> > > > +
> > > > +static int ls1043a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
> > > > +{
> > > > + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > > > + struct ls_pcie *pcie = to_ls_pcie(pci);
> > > > + u32 val;
> > > > +
> > > > + /*
> > > > + * Only way let PEX module exit L2 is do a software reset.
> > >
> > > Can you expand PEX? What is it used for?
> > >
> > > Also if the reset is only for the PEX module, please use the same comment in
> > > both patches 2 and 4. Patch 2 doesn't mention PEX in the comment.
> >
> > After read spec again, I think PEX is pci express. So it should software
> > reset controller. I don't know what exactly did in the chip. But without
> > below code, PCIe can't exit L2/L3.
> >
> > Any harmful if dwc controller reset? Anyway these code works well with
> > intel network card.
>
> Sorry, sent too quick. It is PCIe express wrapper
>
> Copy from spec:
>
> "PEXLDBG[SR]. Once set the
> PEXLDBG[SR] will enable the soft reset to the PEX wrapper."
>
Okay. Please use the below comment in both patches 2 and 4:
/* Reset the PEX wrapper to bring the link out of L2 */
- Mani
> Frank
>
> >
> > Frank
> >
> > >
> > > - Mani
> > >
> > > > + * LDBG_WE: allows the user to have write access to the PEXDBG[SR] for both setting and
> > > > + * clearing the soft reset on the PEX module.
> > > > + * LDBG_SR: When SR is set to 1, the PEX module enters soft reset.
> > > > + */
> > > > + val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
> > > > + val |= LDBG_WE;
> > > > + ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
> > > > +
> > > > + val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
> > > > + val |= LDBG_SR;
> > > > + ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
> > > > +
> > > > + val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
> > > > + val &= ~LDBG_SR;
> > > > + ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
> > > > +
> > > > + val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
> > > > + val &= ~LDBG_WE;
> > > > + ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > static const struct dw_pcie_host_ops ls_pcie_host_ops = {
> > > > .host_init = ls_pcie_host_init,
> > > > .pme_turn_off = ls_pcie_send_turnoff_msg,
> > > > @@ -242,6 +290,19 @@ static const struct ls_pcie_drvdata ls1021a_drvdata = {
> > > > .exit_from_l2 = ls1021a_pcie_exit_from_l2,
> > > > };
> > > >
> > > > +static const struct dw_pcie_host_ops ls1043a_pcie_host_ops = {
> > > > + .host_init = ls_pcie_host_init,
> > > > + .pme_turn_off = ls1043a_pcie_send_turnoff_msg,
> > > > +};
> > > > +
> > > > +static const struct ls_pcie_drvdata ls1043a_drvdata = {
> > > > + .pf_lut_off = 0x10000,
> > > > + .pm_support = true,
> > > > + .scfg_support = true,
> > > > + .ops = &ls1043a_pcie_host_ops,
> > > > + .exit_from_l2 = ls1043a_pcie_exit_from_l2,
> > > > +};
> > > > +
> > > > static const struct ls_pcie_drvdata layerscape_drvdata = {
> > > > .pf_lut_off = 0xc0000,
> > > > .pm_support = true,
> > > > @@ -252,7 +313,7 @@ static const struct of_device_id ls_pcie_of_match[] = {
> > > > { .compatible = "fsl,ls1012a-pcie", .data = &layerscape_drvdata },
> > > > { .compatible = "fsl,ls1021a-pcie", .data = &ls1021a_drvdata },
> > > > { .compatible = "fsl,ls1028a-pcie", .data = &layerscape_drvdata },
> > > > - { .compatible = "fsl,ls1043a-pcie", .data = &ls1021a_drvdata },
> > > > + { .compatible = "fsl,ls1043a-pcie", .data = &ls1043a_drvdata },
> > > > { .compatible = "fsl,ls1046a-pcie", .data = &layerscape_drvdata },
> > > > { .compatible = "fsl,ls2080a-pcie", .data = &layerscape_drvdata },
> > > > { .compatible = "fsl,ls2085a-pcie", .data = &layerscape_drvdata },
> > > > --
> > > > 2.34.1
> > > >
> > >
> > > --
> > > மணிவண்ணன் சதாசிவம்
--
மணிவண்ணன் சதாசிவம்
