[PATCH v7 1/3] dt-bindings: PCI: brcmstb: Add property "brcm,clkreq-mode"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The Broadcom STB/CM PCIe HW -- a core that is also used by RPi SOCs --
requires the driver to deliberately place the RC HW one of three CLKREQ#
modes.  The "brcm,clkreq-mode" property allows the user to override the
default setting.  If this property is omitted, the default mode shall be
"default".

Signed-off-by: Jim Quinlan <james.quinlan@xxxxxxxxxxxx>
---
 .../bindings/pci/brcm,stb-pcie.yaml           | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
index 7e15aae7d69e..992b35e915a5 100644
--- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -64,6 +64,27 @@ properties:
 
   aspm-no-l0s: true
 
+  brcm,clkreq-mode:
+    description: A string that determines the operating
+      clkreq mode of the PCIe RC HW WRT controlling the refclk signal.
+      There are three different modes --
+      "safe", which drives the
+      refclk signal unconditionally and will work for all devices but does
+      not provide any power savings;
+      "no-l1ss" -- which provides Clock Power Management, L0s, and
+      L1, but cannot provide L1 substate (L1SS) power
+      savings. If the downstream device connected to the RC is
+      L1SS capable AND the OS enables L1SS, all PCIe traffic
+      may abruptly halt, potentially hanging the system;
+      "default" -- which provides L0s, L1, and L1SS, but not
+      compliant to provide Clock Power Management;
+      specifically, may not be able to meet the Tclron max
+      timing of 400ns as specified in "Dynamic Clock Control",
+      section 3.2.5.2.2 of the PCIe spec.  This situation is
+      atypical and should happen only with older devices.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ safe, no-l1ss, default ]
+
   brcm,scb-sizes:
     description: u64 giving the 64bit PCIe memory
       viewport size of a memory controller.  There may be up to
-- 
2.17.1

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature


[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux