Since PCI core and ACPI core already handles PCI PME wake and GPE wake
when the device has wakeup capability, use device_init_wakeup() to let
them do the wakeup setting work.
Also add a shutdown callback which uses pci_prepare_to_sleep() to let
PCI and ACPI set OOB wakeup for S5.
Cc: Jian Hui Lee <jianhui.lee@xxxxxxxxxxxxx>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
---
v2:
Rebase on ("HID: intel-ish-hid: ipc: Disable and reenable ACPI GPE bit")
drivers/hid/intel-ish-hid/ipc/pci-ish.c | 67 ++++++-------------------
1 file changed, 15 insertions(+), 52 deletions(-)
diff --git a/drivers/hid/intel-ish-hid/ipc/pci-ish.c b/drivers/hid/intel-ish-hid/ipc/pci-ish.c
index 710fda5f19e1..65e7eeb2fa64 100644
--- a/drivers/hid/intel-ish-hid/ipc/pci-ish.c
+++ b/drivers/hid/intel-ish-hid/ipc/pci-ish.c
@@ -119,50 +119,6 @@ static inline bool ish_should_leave_d0i3(struct pci_dev *pdev)
return !pm_resume_via_firmware() || pdev->device == CHV_DEVICE_ID;
}
-static int enable_gpe(struct device *dev)
-{
-#ifdef CONFIG_ACPI
- acpi_status acpi_sts;
- struct acpi_device *adev;
- struct acpi_device_wakeup *wakeup;
-
- adev = ACPI_COMPANION(dev);
- if (!adev) {
- dev_err(dev, "get acpi handle failed\n");
- return -ENODEV;
- }
- wakeup = &adev->wakeup;
-
- /*
- * Call acpi_disable_gpe(), so that reference count
- * gpe_event_info->runtime_count doesn't overflow.
- * When gpe_event_info->runtime_count = 0, the call
- * to acpi_disable_gpe() simply return.
- */
- acpi_disable_gpe(wakeup->gpe_device, wakeup->gpe_number);
-
- acpi_sts = acpi_enable_gpe(wakeup->gpe_device, wakeup->gpe_number);
- if (ACPI_FAILURE(acpi_sts)) {
- dev_err(dev, "enable ose_gpe failed\n");
- return -EIO;
- }
-
- return 0;
-#else
- return -ENODEV;
-#endif
-}
-
-static void enable_pme_wake(struct pci_dev *pdev)
-{
- if ((pci_pme_capable(pdev, PCI_D0) ||
- pci_pme_capable(pdev, PCI_D3hot) ||
- pci_pme_capable(pdev, PCI_D3cold)) && !enable_gpe(&pdev->dev)) {
- pci_pme_active(pdev, true);
- dev_dbg(&pdev->dev, "ish ipc driver pme wake enabled\n");
- }
-}
-
/**
* ish_probe() - PCI driver probe callback
* @pdev: pci device
@@ -233,7 +189,7 @@ static int ish_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
/* Enable PME for EHL */
if (pdev->device == EHL_Ax_DEVICE_ID)
- enable_pme_wake(pdev);
+ device_init_wakeup(dev, true);
ret = ish_init(ishtp);
if (ret)
@@ -256,6 +212,19 @@ static void ish_remove(struct pci_dev *pdev)
ish_device_disable(ishtp_dev);
}
+
+/**
+ * ish_shutdown() - PCI driver shutdown callback
+ * @pdev: pci device
+ *
+ * This function sets up wakeup for S5
+ */
+static void ish_shutdown(struct pci_dev *pdev)
+{
+ if (pdev->device == EHL_Ax_DEVICE_ID)
+ pci_prepare_to_sleep(pdev);
+}
+
static struct device __maybe_unused *ish_resume_device;
/* 50ms to get resume response */
@@ -378,13 +347,6 @@ static int __maybe_unused ish_resume(struct device *device)
struct pci_dev *pdev = to_pci_dev(device);
struct ishtp_device *dev = pci_get_drvdata(pdev);
- /* add this to finish power flow for EHL */
- if (dev->pdev->device == EHL_Ax_DEVICE_ID) {
- pci_set_power_state(pdev, PCI_D0);
- enable_pme_wake(pdev);
- dev_dbg(dev->devc, "set power state to D0 for ehl\n");
- }
-
ish_resume_device = device;
dev->resume_flag = 1;
@@ -400,6 +362,7 @@ static struct pci_driver ish_driver = {
.id_table = ish_pci_tbl,
.probe = ish_probe,
.remove = ish_remove,
+ .shutdown = ish_shutdown,
.driver.pm = &ish_pm_ops,
};
--
2.34.1
