Re: [PATCH v2 2/2] PCI: hotplug: Add extension driver for Ampere Altra hotplug LED control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2023-10-25 13:06, Bjorn Helgaas wrote:
> On Wed, Oct 25, 2023 at 10:41:46AM -0700, D Scott Phillips wrote:
> > Bjorn Helgaas <helgaas@xxxxxxxxxx> writes:
> > 
> > > On Fri, Sep 29, 2023 at 05:20:36PM -0700, D Scott Phillips wrote:
> > >> On Ampere Altra, PCIe hotplug is handled through ACPI. A side interface is
> > >> also present to request system firmware control of attention LEDs. Add an
> > >> ACPI PCI Hotplug companion driver to support attention LED control.
> > >> ...
> > >
> > >> +	arm_smccc_smc(REQUEST, LED_CMD, led_status(status), LED_ATTENTION,
> > >> +		      pci_domain_nr(bus) | (PCI_SLOT(root_port->devfn) << 4), 0, 0,
> > >
> > > pci_domain_nr() returns "int" (normally 32 bits), but since this is an
> > > ACPI system, the domain comes from _SEG, which is defined to be 16
> > > bits (ACPI r6.5, sec 6.5.6).
> > >
> > > So it looks like ORing in the "slot << 4" clobbers the upper 12 bits
> > > of _SEG.
> > >
> > > Is this code doing the right thing?
> > 
> > Hi Bjorn,
> > 
> > on these Altra platforms _SEG is limited within 0-11. I can add an `&
> > 0xf` to pci_domain_nr() to make it clear that the segment number is
> > encoded down into 4 bits in the smc request.
> 
> If the following looks OK, we're all set.  I put these on pci/hotplug
> for v6.7, thanks!
> 
> +static int set_attention_status(struct hotplug_slot *slot, u8 status)
> +{
> +	struct arm_smccc_res res;
> +	struct pci_bus *bus;
> +	struct pci_dev *root_port;
> +	unsigned long flags;
> +	u32 handle;
> +	int ret = 0;
> +
> +	bus = slot->pci_slot->bus;
> +	root_port = pcie_find_root_port(bus->self);
> +	if (!root_port)
> +		return -ENODEV;
> +
> +	local_irq_save(flags);
> +	arm_smccc_smc(HANDLE_OPEN, led_service_id[0], led_service_id[1],
> +		      led_service_id[2], led_service_id[3], 0, 0, 0, &res);
> +	if (res.a0) {
> +		ret = -ENODEV;
> +		goto out;
> +	}
> +	handle = res.a1 & 0xffff0000;
> +
> +	arm_smccc_smc(REQUEST, LED_CMD, led_status(status), LED_ATTENTION,
> +		     PCI_SLOT(root_port->devfn) << 4 | pci_domain_nr(bus) & 0xf,
> +		     0, 0, handle, &res);
> +	if (res.a0)
> +		ret = -ENODEV;
> +
> +	arm_smccc_smc(HANDLE_CLOSE, handle, 0, 0, 0, 0, 0, 0, &res);
> +
> + out:
> +	local_irq_restore(flags);
> +	return ret;
> +}

Hi,

Building todays linux-next tag next-20231026 for arm64 with
CONFIG_HOTPLUG_PCI_ACPI_AMPERE_ALTRA=m I see the following build error.

drivers/pci/hotplug/acpiphp_ampere_altra.c: In function 'set_attention_status':
drivers/pci/hotplug/acpiphp_ampere_altra.c:63:75: error: suggest parentheses around arithmetic in operand of '|' [-Werror=parentheses]
   63 |                      PCI_SLOT(root_port->devfn) << 4 | pci_domain_nr(bus) & 0xf,
      |                                                        ~~~~~~~~~~~~~~~~~~~^~~~~
include/linux/arm-smccc.h:382:44: note: in definition of macro 'arm_smccc_smc'
  382 | #define arm_smccc_smc(...) __arm_smccc_smc(__VA_ARGS__, NULL)
      |                                            ^~~~~~~~~~~
cc1: all warnings being treated as errors
make[6]: *** [scripts/Makefile.build:243: drivers/pci/hotplug/acpiphp_ampere_altra.o] Error 1

Looks like this is the problematic patch
13ba8a09c4f6 ("PCI: hotplug: Add Ampere Altra Attention Indicator extension driver")

Cheers,
Anders



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux