On Tue, Oct 17, 2023 at 10:42:51AM +0300, Ido Schimmel wrote:
> Currently, the time it took a PCI device to become ready after reset is
> only printed if it was longer than 1000ms ('PCI_RESET_WAIT'). However,
> for debugging purposes it is useful to know this time even if it was
> shorter. For example, with the device I am working on, hardware
> engineers asked to verify that it becomes ready on the first try (no
> delay).
>
> To that end, add a debug level print that can be enabled using dynamic
> debug. Example:
>
> # echo 1 > /sys/bus/pci/devices/0000\:01\:00.0/reset
> # dmesg -c | grep ready
> # echo "file drivers/pci/pci.c +p" > /sys/kernel/debug/dynamic_debug/control
> # echo 1 > /sys/bus/pci/devices/0000\:01\:00.0/reset
> # dmesg -c | grep ready
> [ 396.060335] mlxsw_spectrum4 0000:01:00.0: ready 0ms after link toggle
> # echo "file drivers/pci/pci.c -p" > /sys/kernel/debug/dynamic_debug/control
> # echo 1 > /sys/bus/pci/devices/0000\:01\:00.0/reset
> # dmesg -c | grep ready
>
> Signed-off-by: Ido Schimmel <idosch@xxxxxxxxxx>
Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> ---
> drivers/pci/pci.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index 59c01d68c6d5..0a708e65c5c4 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -1216,6 +1216,9 @@ static int pci_dev_wait(struct pci_dev *dev, char *reset_type, int timeout)
> if (delay > PCI_RESET_WAIT)
> pci_info(dev, "ready %dms after %s\n", delay - 1,
> reset_type);
> + else
> + pci_dbg(dev, "ready %dms after %s\n", delay - 1,
> + reset_type);
>
> return 0;
> }
> --
> 2.40.1
>
