Spectrum-{1,2,3,4} devices report that a D3hot->D0 transition causes a
reset (i.e., they advertise NoSoftRst-). However, this transition seems
to have no effect on the device: It continues to be operational and
network ports remain up. Advertising this support makes it seem as if a
PM reset is viable for these devices. Mark it as unavailable to skip it
when testing reset methods.
Before:
# cat /sys/bus/pci/devices/0000\:03\:00.0/reset_method
pm bus
After:
# cat /sys/bus/pci/devices/0000\:03\:00.0/reset_method
bus
Signed-off-by: Ido Schimmel <idosch@xxxxxxxxxx>
---
drivers/pci/quirks.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index eeec1d6f9023..23f6bd2184e2 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3784,6 +3784,19 @@ static void quirk_no_pm_reset(struct pci_dev *dev)
DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_ATI, PCI_ANY_ID,
PCI_CLASS_DISPLAY_VGA, 8, quirk_no_pm_reset);
+/*
+ * Spectrum-{1,2,3,4} devices report that a D3hot->D0 transition causes a reset
+ * (i.e., they advertise NoSoftRst-). However, this transition seems to have no
+ * effect on the device: It continues to be operational and network ports
+ * remain up. Advertising this support makes it seem as if a PM reset is viable
+ * for these devices. Mark it as unavailable to skip it when testing reset
+ * methods.
+ */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MELLANOX, 0xcb84, quirk_no_pm_reset);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MELLANOX, 0xcf6c, quirk_no_pm_reset);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MELLANOX, 0xcf70, quirk_no_pm_reset);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MELLANOX, 0xcf80, quirk_no_pm_reset);
+
/*
* Thunderbolt controllers with broken MSI hotplug signaling:
* Entire 1st generation (Light Ridge, Eagle Ridge, Light Peak) and part
--
2.40.1
