On Mon, Oct 16, 2023 at 10:28:24PM +0530, Manivannan Sadhasivam wrote:
> On Fri, Sep 15, 2023 at 02:43:05PM -0400, Frank Li wrote:
> > ls1021a add suspend/resume support.
> >
>
> Please add what the driver is doing during suspend/resume.
>
> > Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> > ---
> > drivers/pci/controller/dwc/pci-layerscape.c | 88 ++++++++++++++++++++-
> > 1 file changed, 87 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
> > index 20c48c06e2248..bc5a8ff1a26ce 100644
> > --- a/drivers/pci/controller/dwc/pci-layerscape.c
> > +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> > @@ -35,6 +35,12 @@
> > #define PF_MCR_PTOMR BIT(0)
> > #define PF_MCR_EXL2S BIT(1)
> >
> > +/* LS1021A PEXn PM Write Control Register */
> > +#define SCFG_PEXPMWRCR(idx) (0x5c + (idx) * 0x64)
> > +#define PMXMTTURNOFF BIT(31)
> > +#define SCFG_PEXSFTRSTCR 0x190
> > +#define PEXSR(idx) BIT(idx)
> > +
> > #define PCIE_IATU_NUM 6
> >
> > struct ls_pcie_drvdata {
> > @@ -48,6 +54,8 @@ struct ls_pcie {
> > struct dw_pcie *pci;
> > const struct ls_pcie_drvdata *drvdata;
> > void __iomem *pf_base;
> > + struct regmap *scfg;
> > + int index;
> > bool big_endian;
> > };
> >
> > @@ -170,13 +178,91 @@ static int ls_pcie_host_init(struct dw_pcie_rp *pp)
> > return 0;
> > }
> >
> > +static void ls1021a_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
> > +{
> > + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > + struct ls_pcie *pcie = to_ls_pcie(pci);
> > + u32 val;
> > +
> > + if (!pcie->scfg) {
>
> Can this ever happen?
>
> > + dev_dbg(pcie->pci->dev, "SYSCFG is NULL\n");
> > + return;
> > + }
> > +
> > + /* Send Turn_off message */
>
> "Send PME_Turn_Off message"
>
> > + regmap_read(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), &val);
> > + val |= PMXMTTURNOFF;
> > + regmap_write(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), val);
> > +
> > + /* There are not register to check ACK, so wait PCIE_PME_TO_L2_TIMEOUT_US */
>
> "There is no specific register to check for PME_To_Ack from endpoint. So on the
> safe side, wait for PCIE_PME_TO_L2_TIMEOUT_US."
>
> > + mdelay(PCIE_PME_TO_L2_TIMEOUT_US/1000);
> > +
> > + /* Clear Turn_off message */
>
> "PME_Turn_off". But I'm not sure if this is really required. Are you doing it
> because the layerspace hw implements the PME_Turn_Off bit as "level triggered"?
I am not sure how hardware implement this. But reference manual said:
PMXMTTURNOFF:
Generate PM turnoff message for power management of PCI Express controllers.
This bit should be cleared by software.
0 Clear PM turnoff (default)
1 Trigger PM turnoff
Frank
>
> > + regmap_read(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), &val);
> > + val &= ~PMXMTTURNOFF;
> > + regmap_write(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), val);
> > +}
> > +
> > +static void ls1021a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
> > +{
> > + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > + struct ls_pcie *pcie = to_ls_pcie(pci);
> > + u32 val;
> > +
>
> A comment here would be good.
>
> > + regmap_read(pcie->scfg, SCFG_PEXSFTRSTCR, &val);
> > + val |= PEXSR(pcie->index);
> > + regmap_write(pcie->scfg, SCFG_PEXSFTRSTCR, val);
> > +
> > + regmap_read(pcie->scfg, SCFG_PEXSFTRSTCR, &val);
> > + val &= ~PEXSR(pcie->index);
> > + regmap_write(pcie->scfg, SCFG_PEXSFTRSTCR, val);
> > +}
> > +
> > +static int ls1021a_pcie_host_init(struct dw_pcie_rp *pp)
> > +{
> > + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > + struct ls_pcie *pcie = to_ls_pcie(pci);
> > + struct device *dev = pcie->pci->dev;
> > + u32 index[2];
> > + int ret;
> > +
> > + ret = ls_pcie_host_init(pp);
> > + if (ret)
> > + return ret;
> > +
> > + pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,pcie-scfg");
> > + if (IS_ERR(pcie->scfg)) {
> > + ret = PTR_ERR(pcie->scfg);
> > + dev_err(dev, "No syscfg phandle specified\n");
> > + pcie->scfg = NULL;
> > + return ret;
> > + }
> > +
> > + ret = of_property_read_u32_array(dev->of_node, "fsl,pcie-scfg", index, 2);
> > + if (ret) {
> > + pcie->scfg = NULL;
> > + return ret;
> > + }
> > +
> > + pcie->index = index[1];
> > +
>
> The above syscon parsing could be done conditionally during probe itself. There
> is no need to do it during host_init() time.
>
> - Mani
>
> > + return ret;
> > +}
> > +
> > static const struct dw_pcie_host_ops ls_pcie_host_ops = {
> > .host_init = ls_pcie_host_init,
> > .pme_turn_off = ls_pcie_send_turnoff_msg,
> > };
> >
> > +static const struct dw_pcie_host_ops ls1021a_pcie_host_ops = {
> > + .host_init = ls1021a_pcie_host_init,
> > + .pme_turn_off = ls1021a_pcie_send_turnoff_msg,
> > +};
> > +
> > static const struct ls_pcie_drvdata ls1021a_drvdata = {
> > - .pm_support = false,
> > + .pm_support = true,
> > + .ops = &ls1021a_pcie_host_ops,
> > + .exit_from_l2 = ls1021a_pcie_exit_from_l2,
> > };
> >
> > static const struct ls_pcie_drvdata layerscape_drvdata = {
> > --
> > 2.34.1
> >
>
> --
> மணிவண்ணன் சதாசிவம்
