Re: [PATCH v1 1/5] dt-bindings: PCI: qcom-ep: Add support for SA8775P SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 13 Oct 2023 at 15:55, Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx> wrote:
>
>
> On 10/11/2023 5:13 PM, Dmitry Baryshkov wrote:
> > On Wed, 11 Oct 2023 at 14:14, Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx> wrote:
> >>
> >> On 10/6/2023 4:24 PM, Shazad Hussain wrote:
> >>>
> >>> On 9/22/2023 12:08 AM, Rob Herring wrote:
> >>>> On Wed, Sep 20, 2023 at 07:25:08PM +0530, Mrinmay Sarkar wrote:
> >>>>> Add devicetree bindings support for SA8775P SoC.
> >>>>> Define reg and interrupt per platform.
> >>>>>
> >>>>> Signed-off-by: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
> >>>>> ---
> >>>>>    .../devicetree/bindings/pci/qcom,pcie-ep.yaml      | 130
> >>>>> +++++++++++++++++----
> >>>>>    1 file changed, 108 insertions(+), 22 deletions(-)
> >>>>>
> >>>>> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
> >>>>> b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
> >>>>> index a223ce0..e860e8f 100644
> >>>>> --- a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
> >>>>> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
> >>>>> @@ -13,6 +13,7 @@ properties:
> >>>>>      compatible:
> >>>>>        oneOf:
> >>>>>          - enum:
> >>>>> +          - qcom,sa8775p-pcie-ep
> >>>>>              - qcom,sdx55-pcie-ep
> >>>>>              - qcom,sm8450-pcie-ep
> >>>>>          - items:
> >>>>> @@ -20,29 +21,19 @@ properties:
> >>>>>              - const: qcom,sdx55-pcie-ep
> >>>>>        reg:
> >>>>> -    items:
> >>>>> -      - description: Qualcomm-specific PARF configuration registers
> >>>>> -      - description: DesignWare PCIe registers
> >>>>> -      - description: External local bus interface registers
> >>>>> -      - description: Address Translation Unit (ATU) registers
> >>>>> -      - description: Memory region used to map remote RC address space
> >>>>> -      - description: BAR memory region
> >>>>> +    minItems: 6
> >>>>> +    maxItems: 7
> >>>>>        reg-names:
> >>>>> -    items:
> >>>>> -      - const: parf
> >>>>> -      - const: dbi
> >>>>> -      - const: elbi
> >>>>> -      - const: atu
> >>>>> -      - const: addr_space
> >>>>> -      - const: mmio
> >>>>> +    minItems: 6
> >>>>> +    maxItems: 7
> >>>> Don't move these into if/then schemas. Then we are duplicating the
> >>>> names, and there is no reason to keep them aligned for new compatibles.
> >>>>
> >>>> Rob
> >>> Hi Rob,
> >>> As we have one extra reg property (dma) required for sa8775p-pcie-ep,
> >>> isn't it expected to be moved in if/then as per number of regs
> >>> required. Anyways we would have duplication of some properties for new
> >>> compatibles where the member numbers differs for a property.
> >>>
> >>> Are you suggesting to add the extra reg property (dma) in the existing
> >>> reg and reg-names list, and add minItems/maxItems for all compatibles
> >>> present in this file ?
> > This is what we have been doing in other cases: if the list is an
> > extension of the current list, there is no need to duplicate it. One
> > can use min/maxItems instead.
> Hi Dmitry
>
> we have tried using min/maxItems rather than duplicating but somehow
> catch up with some warnings in dt_bindings check
>
> //local/mnt/workspace/Mrinmay/lemans/next-20230914/linux-next/out/Documentation/devicetree/bindings/pci/qcom,pcie-ep.example.dtb:
> pcie-ep@1c00000: reg: [[29360128, 12288], [1073741824, 3869],
> [1073745696, 200], [1073745920, 4096], [1073750016, 4096], [29372416,
> 12288]] is too short//
> //        from schema $id:
> http://devicetree.org/schemas/pci/qcom,pcie-ep.yaml#//
> ///local/mnt/workspace/Mrinmay/lemans/next-20230914/linux-next/out/Documentation/devicetree/bindings/pci/qcom,pcie-ep.example.dtb:
> pcie-ep@1c00000: reg-names: ['parf', 'dbi', 'elbi', 'atu', 'addr_space',
> 'mmio'] is too short//
> //        from schema $id:
> http://devicetree.org/schemas/pci/qcom,pcie-ep.yaml#//
> ///local/mnt/workspace/Mrinmay/lemans/next-20230914/linux-next/out/Documentation/devicetree/bindings/pci/qcom,pcie-ep.example.dtb:
> pcie-ep@1c00000: interrupts: [[0, 140, 4], [0, 145, 4]] is too short//
> //        from schema $id:
> http://devicetree.org/schemas/pci/qcom,pcie-ep.yaml#//
> ///local/mnt/workspace/Mrinmay/lemans/next-20230914/linux-next/out/Documentation/devicetree/bindings/pci/qcom,pcie-ep.example.dtb:
> pcie-ep@1c00000: interrupt-names: ['global', 'doorbell'] is too short//
> //        from schema $id:
> http://devicetree.org/schemas/pci/qcom,pcie-ep.yaml#//
> /
>
> //local/mnt/workspace/Mrinmay/lemans/next-20230914/linux-next/out/Documentation/devicetree/bindings/pci/qcom,pcie-ep.example.dtb:
> pcie-ep@1c00000: interrupt-names: ['global', 'doorbell'] is too short/
>
> added the patch in attachment.

Please, don't send patches as attachments. It is impossible to comment on it.

So, few points I had to fix to make your patch to work:

- Please, understand the difference between enum and items. You'd need
to add your compat string to only one of them. Or to a new entry. But
adding it to both entries is a definite mistake.

- You have extended items for existing platforms (reg, reg-names,
interrupts, interrupt-names). However you failed to add corresponding
minItems, allowing existing platforms to use the list with less items
in it.

- You do not need to have maxItems:N, minItems:N with the same value.
Please drop these minItems, it is the default.

- You haven't reviewed the patch on your own. You have erroneously
nested 'properties' clauses in two places.

$ git diff --stat
 Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml | 33
+++++++++++----------------------
 1 file changed, 11 insertions(+), 22 deletions(-)

Hope this helps.

-- 
With best wishes
Dmitry



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux