Re: [PATCH 1/6] dt-bindings: phy: qcom,uniphy-pcie: Document PCIe uniphy

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 10/4/2023 12:27 PM, Krzysztof Kozlowski wrote:
On 03/10/2023 14:08, Nitheesh Sekar wrote:
Document the Qualcomm UNIPHY PCIe 28LP present in IPQ5018.

Signed-off-by: Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
Thank you for your patch. There is something to discuss/improve.
Sure. Will learn and improve.


---
  .../bindings/phy/qcom,uniphy-pcie-28lp.yaml   | 77 +++++++++++++++++++
  1 file changed, 77 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/phy/qcom,uniphy-pcie-28lp.yaml

diff --git a/Documentation/devicetree/bindings/phy/qcom,uniphy-pcie-28lp.yaml b/Documentation/devicetree/bindings/phy/qcom,uniphy-pcie-28lp.yaml
new file mode 100644
index 000000000000..6b2574f9532e
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,uniphy-pcie-28lp.yaml
Filename should match compatibles and they do not use 28lp.
Sure. will remove the 28lp. added it based on the file name.
Is "qcom,uniphy-pcie.yaml" good ? Because this will be used for other SoCs as well which will have different compatibles. So i did not include the SoC name, lane and speed info which i have used int he compatible names.

@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,uniphy-pcie-28lp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm UNIPHY PCIe 28LP PHY driver
Driver as Linux driver? Drop. Describe the hardware instead.

+
+maintainers:
+  - Nitheesh Sekar <quic_nsekar@xxxxxxxxxxx>
+  - Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq5018-uniphy-pcie-gen2x1
+      - qcom,ipq5018-uniphy-pcie-gen2x2
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: pipe_clk
Drop _clk... or even drop entire clock-names. Not needed for one entry.
Sure. Will drop "_clk" part.

+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: phy
+      - const: phy_phy
These are absolutely terrible names. If you have third one, it would be
"phy_phy_phy"? Drop or provide something useful.
Sure. Will update.

Thanks,
Nitheesh



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux