Iain reports that USB devices can't be used to wake a Lenovo Z13 from suspend. This occurs because on some AMD platforms, even though the Root Ports advertise PME_Support for D3hot and D3cold, they don't handle PME messages and generate wakeup interrupts from those states when amd-pmc has put the platform in a hardware sleep state. Iain reported this on an AMD Rembrandt platform, but it also affects Phoenix SoCs. On Iain's system, a USB4 router below the affected Root Port generates the PME. To avoid this issue, disable D3 for the root port associated with USB4 controllers at suspend time. Restore D3 support at resume so that it can be used by runtime suspend. The amd-pmc driver doesn't put the platform in a hardware sleep state for runtime suspend, so PMEs work as advertised. Cc: stable@xxxxxxxxxxxxxxx Link: https://learn.microsoft.com/en-us/windows-hardware/design/device-experiences/platform-design-for-modern-standby#low-power-core-silicon-cpu-soc-dram [1] Fixes: 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend") Reported-by: Iain Lane <iain@xxxxxxxxxxxxxxxxxxx> Closes: https://forums.lenovo.com/t5/Ubuntu/Z13-can-t-resume-from-suspend-with-external-USB-keyboard/m-p/5217121 Signed-off-by: Mario Limonciello <mario.limonciello@xxxxxxx> --- v21->v22: * Back to PME to avoid implications for wakeup (Bjorn) * This is the submission that Bjorn sent in the mailing in response to v21. It tests well, so Bjorn please add a Co-Developed-by/Signed-off-by for your self if you feel it's appropriate. v20-v21: * Rewrite commit message, lifting most of what Bjorn clipped down to on v20. * Use pci_d3cold_disable()/pci_d3cold_enable() instead * Do the quirk on the USB4 controller instead of RP->USB->RP --- drivers/pci/quirks.c | 57 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index eeec1d6f9023..4b601b1c0830 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -6188,3 +6188,60 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9a31, dpc_log_size); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_XILINX, 0x5020, of_pci_make_dev_node); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_XILINX, 0x5021, of_pci_make_dev_node); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REDHAT, 0x0005, of_pci_make_dev_node); + +#ifdef CONFIG_SUSPEND +/* + * Root Ports on some AMD SoCs advertise PME_Support for D3hot and D3cold, but + * if the SoC is put into a hardware sleep state by the amd-pmc driver, the + * Root Ports don't generate wakeup interrupts for USB devices. + * + * When suspending, remove D3hot and D3cold from the PME_Support advertised + * by the Root Port so we don't use those states if we're expecting wakeup + * interrupts. Restore the advertised PME_Support when resuming. + */ +static void amd_rp_pme_suspend(struct pci_dev *dev) +{ + struct pci_dev *rp; + + /* + * PM_SUSPEND_ON means we're doing runtime suspend, which means + * amd-pmc will not be involved so PMEs during D3 work as advertised. + * + * The PMEs *do* work if amd-pmc doesn't put the SoC in the hardware + * sleep state, but we assume amd-pmc is always present. + */ + if (pm_suspend_target_state == PM_SUSPEND_ON) + return; + + rp = pcie_find_root_port(dev); + if (!rp->pm_cap) + return; + + rp->pme_support &= ~((PCI_PM_CAP_PME_D3hot|PCI_PM_CAP_PME_D3cold) >> + PCI_PM_CAP_PME_SHIFT); + dev_info_once(&rp->dev, "quirk: disabling D3cold for suspend\n"); +} + +static void amd_rp_pme_resume(struct pci_dev *dev) +{ + struct pci_dev *rp; + u16 pmc; + + rp = pcie_find_root_port(dev); + if (!rp->pm_cap) + return; + + pci_read_config_word(rp, rp->pm_cap + PCI_PM_PMC, &pmc); + rp->pme_support = FIELD_GET(PCI_PM_CAP_PME_MASK, pmc); +} +/* Rembrandt (yellow_carp) */ +DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_AMD, 0x162e, amd_rp_pme_suspend); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, 0x162e, amd_rp_pme_resume); +DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_AMD, 0x162f, amd_rp_pme_suspend); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, 0x162f, amd_rp_pme_resume); +/* Phoenix (pink_sardine) */ +DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_AMD, 0x1668, amd_rp_pme_suspend); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, 0x1668, amd_rp_pme_resume); +DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_AMD, 0x1669, amd_rp_pme_suspend); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, 0x1669, amd_rp_pme_resume); +#endif /* CONFIG_SUSPEND */ -- 2.34.1
